Difference between revisions of "UBNT: Upload Firmware"

From OnnoWiki
Jump to navigation Jump to search
Line 79: Line 79:
 
* [[Buffalo: WZRHPG450H Cara Recovery]]
 
* [[Buffalo: WZRHPG450H Cara Recovery]]
 
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
−
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''COOL'''
+
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
 
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
−
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]]
+
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
 
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
 +
===APRX===
 +
 +
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
  
 
===IPv6===
 
===IPv6===
Line 101: Line 108:
 
* [[OpenWRT: Flash Linksys WRT54GL]]
 
* [[OpenWRT: Flash Linksys WRT54GL]]
 
* [[OpenWRT: Flash Linksys WRT160NL]]
 
* [[OpenWRT: Flash Linksys WRT160NL]]
−
* [[OpenWRT: Flash Buffalo WZRHP450H]]
+
* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
 
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 
* [[OpenWRT: Flash Buffalo WZRHP300N]]
−
* [[OpenWRT: Flash UBNT NanoStation2]]
+
* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
−
* [[OpenWRT: Flash UBNT NanoStation M2]]
+
* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
 
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
  
 
===Misc===
 
===Misc===
Line 111: Line 119:
 
* [[OpenWRT: Setup WiFi]]
 
* [[OpenWRT: Setup WiFi]]
 
* [[OpenWRT: Setup PPTP VPN Server]]
 
* [[OpenWRT: Setup PPTP VPN Server]]
−
* [[OpenWRT: Setup OLSR di UBNT via CLI]]
+
* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
 
* [[OpenWRT: Mikrotik RB433]]
 
* [[OpenWRT: Mikrotik RB433]]
 
* [[OpenWRT: Setup OLSR Sederhana]]
 
* [[OpenWRT: Setup OLSR Sederhana]]
Line 139: Line 147:
 
* [[OLSR - di Ubuntu]]
 
* [[OLSR - di Ubuntu]]
 
* [[OpenWRT]]
 
* [[OpenWRT]]
 +
* [[OLSR: NAT di UBNT dengan OLSR]]

Revision as of 19:12, 10 December 2013

Teknik upload firmware sama dengan teknik recovery

  • Set IP PC 192.168.1.254/24
ifconfig eth0 192.168.1.254 netmask 255.255.255.0
  • Pindah ke folder tempat image, misalnya
~/openwrt.trunk/trunk/atheros/
  • Matikan Device UBNT
  • Tekan tombol Reset
  • Nyalakan Device UBNT
  • Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah / menyala seperti flip-flop.
  • Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
  • tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update
..
..
sent DATA <block=6228, 512 bytes>
received ACK <block=6228>
sent DATA <block=6229, 351 bytes>
received ACK <block=6229>
Sent 3189087 bytes in 23.6 seconds
tftp> quit


Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Nyalakan UBNT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Cek UBNT

  • Diamkan beberapa saat. Device jangan di apa-apakan.
  • Tunggu sekitar 1 menit-an
  • ping 192.168.1.20 atau 192.168.1.1
  • Semoga ada responds :) ...

Telnet untuk Reset Password

  • Setelah bisa ping
  • telnet ke 192.168.1.1 untuk reset password



Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=UBNT:_Upload_Firmware&oldid=38889"