OpenWRT: Setup OLSR Sederhana

From OnnoWiki
Jump to navigation Jump to search

Setup Wireless MESH

Melalui Web 

Administration > Network > Wifi > Scan

Klik pada jaringan MESH yang ada.


Setup Wireless IP Address Statik

Melalui Web 

Administration > Network > Interfaces > Klik wireless interface

General Setup > Protocol > Static Address > IPv4 address > 10.x.x.x

General Setup > Protocol > Static Address > IPv4 netmask > 255.0.0.0

Pastikan IP address yang digunakan berbeda dengan teman-teman yang lain agar tidak tabrakan.

Setup Firewall untuk jadi gateway

Jika di perlukan agar proxy / NAT ke Internet bisa beroperasi dengan baik.

Melalui Web 

Administation > Network > Firewall

Klik pada zone wireless 

Advanced Setting > destination zones > klik WAN


Setup OLSR menggunakan shell

Edit 

vi /etc/olsrd.conf

Masukan 

Hna4
{
#  192.168.0.0 255.255.255.0  - gateway ke 192.168.0.0/24
#  0.0.0.0 0.0.0.0            - gateway ke internet
}                                                                                

Hna6                                                                             
{                                                    
}

LoadPlugin "olsrd_nameservice.so.0.3"
{
}

LoadPlugin "olsrd_txtinfo.so.0.1"                                                
{                                                                                                 
    PlParam      "accept" "0.0.0.0"                                              
} 

InterfaceDefaults  
{                                                                                                      
}

Interface "wlan0"                                                 
{
     Mode "mesh"                                                                  
}

Edit 

vi /etc/rc.local

Masukan 

/etc/init.d/olsrd stop
olsrd -f /etc/olsrd.conf &

Pranala Menarik

Build Firmware

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Setup_OLSR_Sederhana&oldid=36677"