Difference between revisions of "UBNT: Upload Firmware"

From OnnoWiki
Jump to navigation Jump to search
Line 72: Line 72:
  
 
* [[OpenWRT: Build Firmware]]
 
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 
* [[Buffalo]]
 
* [[Buffalo]]
 
* [[Buffalo: WZRHPG450H Cara Recovery]]
 
* [[Buffalo: WZRHPG450H Cara Recovery]]
Line 83: Line 85:
 
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
 +
===IPv6===
 +
 +
* [[OpenWRT: IPv6]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
  
 
===Flash Firmware===
 
===Flash Firmware===
Line 96: Line 109:
 
===Misc===
 
===Misc===
  
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 
* [[OpenWRT: Setup OLSR di UBNT via CLI]]
 
* [[OpenWRT: Setup OLSR di UBNT via CLI]]
 
* [[OpenWRT: Mikrotik RB433]]
 
* [[OpenWRT: Mikrotik RB433]]

Revision as of 11:10, 14 June 2013

Teknik upload firmware sama dengan teknik recovery

  • Set IP PC 192.168.1.254/24
ifconfig eth0 192.168.1.254 netmask 255.255.255.0
  • Pindah ke folder tempat image, misalnya
~/openwrt.trunk/trunk/atheros/
  • Matikan Device UBNT
  • Tekan tombol Reset
  • Nyalakan Device UBNT
  • Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah / menyala seperti flip-flop.
  • Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
  • tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update
..
..
sent DATA <block=6228, 512 bytes>
received ACK <block=6228>
sent DATA <block=6229, 351 bytes>
received ACK <block=6229>
Sent 3189087 bytes in 23.6 seconds
tftp> quit


Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Nyalakan UBNT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Cek UBNT

  • Diamkan beberapa saat. Device jangan di apa-apakan.
  • Tunggu sekitar 1 menit-an
  • ping 192.168.1.20 atau 192.168.1.1
  • Semoga ada responds :) ...

Telnet untuk Reset Password

  • Setelah bisa ping
  • telnet ke 192.168.1.1 untuk reset password



Pranala Menarik

Build Firmware

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=UBNT:_Upload_Firmware&oldid=37352"