Difference between revisions of "OpenWRT IPv6: Konfigurasi WAN6 dengan radvd"

From OnnoWiki
Jump to navigation Jump to search
 
Line 320: Line 320:
 
  address=/OpenWrt.lan/192.168.1.1
 
  address=/OpenWrt.lan/192.168.1.1
 
  ptr-record=1.1.168.192.in-addr.arpa,OpenWrt.lan
 
  ptr-record=1.1.168.192.in-addr.arpa,OpenWrt.lan
 +
 +
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenWRT]]
 +
* [[OpenWRT: Download Firmware yang sudah jadi]]
 +
* [[OpenWRT: Source Repository Download]]
 +
* [[OpenWRT: Melihat Daftar Package]]
 +
 +
===Build Firmware===
 +
 +
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[Buffalo]]
 +
* [[Buffalo: WZRHPG450H Cara Recovery]]
 +
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 +
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''COOL'''
 +
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]]
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
 +
===IPv6===
 +
 +
* [[OpenWRT: IPv6]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
 +
 +
===Flash Firmware===
 +
 +
* [[OpenWRT: Flash Linksys WRT54GL]]
 +
* [[OpenWRT: Flash Linksys WRT160NL]]
 +
* [[OpenWRT: Flash Buffalo WZRHP450H]]
 +
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 +
* [[OpenWRT: Flash UBNT NanoStation2]]
 +
* [[OpenWRT: Flash UBNT NanoStation M2]]
 +
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
 +
===Misc===
 +
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 +
* [[OpenWRT: Setup OLSR di UBNT via CLI]]
 +
* [[OpenWRT: Mikrotik RB433]]
 +
* [[OpenWRT: Setup OLSR Sederhana]]
 +
* [[OLSR - di OpenWRT]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[OpenWRT: Setup Firewall]]
 +
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
 +
===UBNT===
 +
 +
* [[UBNT]]
 +
* [[UBNT: Teknik Recovery]]
 +
* [[UBNT: Upload Firmware]]
 +
* [[UBNT: Rebuild Firmware]]
 +
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]

Latest revision as of 11:08, 14 June 2013

/etc/config/6relayd

config server 'default'
	option master 'wan6'
	list network 'lan'
	option fallback_relay 'rd dhcpv6 ndp'
	option compat_ula '1'
	option rd 'relay'
	option dhcpv6 'relay'
	option ndp 'relay'

/etc/config/dhcp

config dnsmasq
	option domainneeded	1
	option boguspriv	1
	option filterwin2k	0  # enable for dial on demand
	option localise_queries	1
	option rebind_protection 1  # disable if upstream must serve RFC1918 addresses
	option rebind_localhost 1  # enable for RBL checking and similar services
	#list rebind_domain example.lan  # whitelist RFC1918 responses for domains
	option local	'/lan/'
	option domain	'lan'
	option expandhosts	1
	option nonegcache	0
	option authoritative	1
	option readethers	1
	option leasefile	'/tmp/dhcp.leases'
	option resolvfile	'/tmp/resolv.conf.auto'
	#list server		'/mycompany.local/1.2.3.4'
	#option nonwildcard	1
	#list interface		br-lan
	#list notinterface	lo
	#list bogusnxdomain     '64.94.110.11'

config dhcp lan
	option interface	lan
	option start 	100
	option limit	150
	option leasetime	12h
 
config dhcp wan
	option interface	wan
	option ignore	1

/etc/config/radvd

config interface
	option interface 'lan'
	option AdvSendAdvert '1'
	option AdvManagedFlag '0'
	option AdvOtherConfigFlag '0'
	list client 
	option ignore '0'

config prefix
	option interface 'lan'
	list prefix 
	option AdvOnLink '1'
	option AdvAutonomous '1'
	option AdvRouterAddr '0'
	option ignore '0'

config route
	option interface 'lan'
	list prefix 
	option ignore '0'

config rdnss
	option interface 'lan'
	list addr 
	option ignore '0'

config dnssl
	option interface 'lan'
	list suffix 
	option ignore '1'

/etc/config/network

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd49:ddaf:137c::/48'

config interface 'lan'
	option ifname 'eth0.1'
	option type 'bridge'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '60'

config interface 'wan'
	option ifname 'eth0.2'
	option proto 'dhcp'

config interface 'wan6'
	option _orig_ifname '@wan'
	option _orig_bridge 'false'
	option proto 'dhcpv6'
	option ifname 'eth0.2'
	option reqprefix 'auto'
	option reqaddress 'force'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'

config switch_vlan
 	option device 'switch0'
	option vlan '1'
	option ports '0t 1 3 4 5'

config switch_vlan
	option device 'switch0'
	option vlan '2'
	option ports '0t 2'

/etc/config/system

config system
        option hostname BuffaloG300NH2
        option timezone UTC+7

config timeserver ntp
        list server     0.openwrt.pool.ntp.org
        list server     1.openwrt.pool.ntp.org
        list server     2.openwrt.pool.ntp.org
        list server     3.openwrt.pool.ntp.org
        option enable_server 0

/etc/config/wireless

config wifi-device  radio0
	option type     mac80211
	option channel  11
	option hwmode	11ng
	option path	'pci0000:00/0000:00:00.0'
	option htmode	HT20
	list ht_capab	SHORT-GI-40
	list ht_capab	TX-STBC
	list ht_capab	RX-STBC1
	list ht_capab	DSSS_CCK-40
	# REMOVE THIS LINE TO ENABLE WIFI:
	option disabled 1

config wifi-iface
	option device   radio0
	option network  lan
	option mode     ap
	option ssid     OpenWrt
	option encryption none


/etc/sysctl.conf

kernel.panic=3
net.ipv4.conf.default.arp_ignore=1
net.ipv4.conf.all.arp_ignore=1
net.ipv4.ip_forward=1
net.ipv4.icmp_echo_ignore_broadcasts=1
net.ipv4.icmp_ignore_bogus_error_responses=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fin_timeout=30
net.ipv4.tcp_keepalive_time=120
net.ipv4.tcp_syncookies=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_sack=1
net.ipv4.tcp_dsack=1

net.ipv6.conf.default.forwarding=1
net.ipv6.conf.all.forwarding=1

net.netfilter.nf_conntrack_acct=1
net.netfilter.nf_conntrack_checksum=0
net.netfilter.nf_conntrack_max=16384
net.netfilter.nf_conntrack_tcp_timeout_established=3600
net.netfilter.nf_conntrack_udp_timeout=60
net.netfilter.nf_conntrack_udp_timeout_stream=180

# disable bridge firewalling by default
net.bridge.bridge-nf-call-arptables=0
net.bridge.bridge-nf-call-ip6tables=0
net.bridge.bridge-nf-call-iptables=0 

/etc/config/firewall

config defaults
	option syn_flood '1'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'REJECT'

config zone
	option name 'lan'
	list network 'lan'
	option input 'ACCEPT'
 	option output 'ACCEPT'
	option forward 'REJECT'

config zone
	option name 'wan'
	list network 'wan'
	list network 'wan6'
	option input 'REJECT'
	option output 'ACCEPT'
	option forward 'REJECT'
	option masq '1'
	option mtu_fix '1'

config forwarding
	option src 'lan'
	option dest 'wan'

config rule
	option name 'Allow-DHCP-Renew'
	option src 'wan'
	option proto 'udp'
	option dest_port '68'
	option target 'ACCEPT'
	option family 'ipv4'

config rule
	option name 'Allow-Ping'
	option src 'wan'
	option proto 'icmp'
	option icmp_type 'echo-request'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-DHCPv6'
	option src 'wan'
	option proto 'udp'
	option src_ip 'fe80::/10'
	option src_port '547'
	option dest_ip 'fe80::/10'
	option dest_port '546'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Input'
	option src 'wan'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	list icmp_type 'router-solicitation'
	list icmp_type 'neighbour-solicitation'
	list icmp_type 'router-advertisement'
	list icmp_type 'neighbour-advertisement'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Forward'
	option src 'wan'
	option dest '*'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config include
	option path '/etc/firewall.user'

config include 'miniupnpd'
	option type 'script'
	option path '/usr/share/miniupnpd/firewall.include'
	option family 'IPv4'
	option reload '1'


/var/etc/dnsmasq.conf

# auto-generated config file from /etc/config/dhcp
conf-file=/etc/dnsmasq.conf
dhcp-authoritative
domain-needed
localise-queries
read-ethers
bogus-priv
expand-hosts
domain=lan
server=/lan/
dhcp-leasefile=/tmp/dhcp.leases
resolv-file=/tmp/resolv.conf.auto
addn-hosts=/tmp/hosts
stop-dns-rebind
rebind-localhost-ok

dhcp-range=lan,192.168.1.100,192.168.1.249,255.255.255.0,12h
no-dhcp-interface=eth0.2

address=/OpenWrt.lan/192.168.1.1
ptr-record=1.1.168.192.in-addr.arpa,OpenWrt.lan


Pranala Menarik

Build Firmware

IPv6

Flash Firmware

Misc

UBNT