Difference between revisions of "OpenWRT: Flash UBNT NanoStation M2"

From OnnoWiki
Jump to navigation Jump to search
m (New page: ==Coba Menggunakan Shell Scipt== * Buat shell script sederhana isinya ifconfig eth0 192.168.1.254 cp openwrt-atheros-ubnt2-squashfs.bin code.bin echo -e "binary\nrexmt 1\ntimeout 60\...)
 
 
(7 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
 
  ifconfig eth0 192.168.1.254
 
  ifconfig eth0 192.168.1.254
−
  cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
+
  cp  openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin code.bin
−
  echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
+
  echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput code.bin flash_update\n" | tftp 192.168.1.20
  
 
* lakukan chmod 777 shellscript.sh tersebut
 
* lakukan chmod 777 shellscript.sh tersebut
 
* Jalankan di folder tempat firmware berada
 
* Jalankan di folder tempat firmware berada
−
* Nyalakan UBNT
+
* Matikan UBNT
 +
* Tekan Reset ~10 detik
 +
* Nyalakan UBNT sambil reset di tekan.
 +
* Pastikan lampu '''FLIP-FLOP'''
 +
 
 +
* '''JALANKAN SCRIPT'''
 
* Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
 
* Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
−
* ping sampai ada responds.
 
  
 +
* Setelah Selesai ping sampai ada responds.
 
  ping 192.168.1.20 (utk firmware UBNT)
 
  ping 192.168.1.20 (utk firmware UBNT)
 
  ping 192.168.1.1  (utk firmware OpenWRT)
 
  ping 192.168.1.1  (utk firmware OpenWRT)
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenWRT]]
 +
* [[OpenWRT: Download Firmware yang sudah jadi]]
 +
* [[OpenWRT: Source Repository Download]]
 +
* [[OpenWRT: Melihat Daftar Package]]
 +
 +
===Build Firmware===
 +
 +
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[Buffalo]]
 +
* [[Buffalo: WZRHPG450H Cara Recovery]]
 +
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 +
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
 +
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
 +
===APRX===
 +
 +
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
 +
 +
===IPv6===
 +
 +
* [[OpenWRT: IPv6]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
 +
 +
===Flash Firmware===
 +
 +
* [[OpenWRT: Flash Linksys WRT54GL]]
 +
* [[OpenWRT: Flash Linksys WRT160NL]]
 +
* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 +
* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB450]]
 +
 +
===Misc===
 +
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 +
* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
 +
* [[OpenWRT: Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Setup OLSR Sederhana]]
 +
* [[OpenWRT: Setup OLSR via Web]] '''RECOMMENDED'''
 +
* [[OLSR - di OpenWRT]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[OpenWRT: Setup Firewall]]
 +
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
* [[OpenWRT: OLSR nameservice plugin]]
 +
 +
===UBNT===
 +
 +
* [[UBNT]]
 +
* [[UBNT: Teknik Recovery]]
 +
* [[UBNT: Upload Firmware]]
 +
* [[UBNT: Rebuild Firmware]]
 +
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]]
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]
 +
* [[OLSR: NAT di UBNT dengan OLSR]]

Latest revision as of 14:39, 23 December 2013

Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput code.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Matikan UBNT
  • Tekan Reset ~10 detik
  • Nyalakan UBNT sambil reset di tekan.
  • Pastikan lampu FLIP-FLOP
  • JALANKAN SCRIPT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • Setelah Selesai ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Flash_UBNT_NanoStation_M2&oldid=39020"