Difference between revisions of "OpenWRT: Flash UBNT NanoStation Loco M2"

From OnnoWiki
Jump to navigation Jump to search
Line 59: Line 59:
 
* [[OpenWRT: Setup Firewall]]
 
* [[OpenWRT: Setup Firewall]]
 
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
 +
===UBNT===
 +
 
* [[UBNT]]
 
* [[UBNT]]
 +
* [[UBNT: Teknik Recovery]]
 +
* [[UBNT: Upload Firmware]]
 +
* [[UBNT: Rebuild Firmware]]
 +
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]

Revision as of 06:20, 19 April 2013

Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput code.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Nyalakan UBNT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)


Pranala Menarik

Build Firmware

Flash Firmware

Misc

UBNT