Difference between revisions of "OpenWRT: Setup OLSR di UBNT via CLI"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
Line 104: | Line 104: | ||
Buat NAT di /etc/rc.local saja | Buat NAT di /etc/rc.local saja | ||
− | ==Set agar OLSR start waktu booting== | + | ==Set agar NAT dan OLSR start waktu booting== |
Edit rc.local | Edit rc.local | ||
Line 113: | Line 113: | ||
ifconfig wlan0 10.123.123.223 netmask 255.0.0.0 '''(IP ADDRESS sama dengan IP addres di /etc/config/network di ATAS)''' | ifconfig wlan0 10.123.123.223 netmask 255.0.0.0 '''(IP ADDRESS sama dengan IP addres di /etc/config/network di ATAS)''' | ||
+ | echo 1 > /proc/sys/net/ipv4/ip_forward | ||
+ | iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE | ||
/etc/init.d/telnet stop | /etc/init.d/telnet stop | ||
/etc/init.d/olsrd stop | /etc/init.d/olsrd stop | ||
Line 118: | Line 120: | ||
exit 0 | exit 0 | ||
+ | |||
+ | |||
+ | Nampaknya NAT sebaiknya di aktifkan di rc.local. | ||
+ | Semua setting /etc/config/firewall di matikan agar OLSR tidak rewel. | ||
==Buat file /etc/olsrd.conf== | ==Buat file /etc/olsrd.conf== |
Revision as of 17:21, 20 December 2013
Reset Password Root
Reset password root melalui telnet ke 192.168.1.1
telnet 192.168.1.1
Tampilan
Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ------------------------------------------ BusyBox v1.19.4 (2013-04-10 18:38:45 WIT) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r36235) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# passwd Changing password for root New password: Retype password: Password for root changed by root
Konfigurasi Wireless
Konfigurasi wireless dan mengaktifkan sebagai adhoc pada channel 1.
vi /etc/config/wireless
Isinya kira-kira
config wifi-device radio0 option type mac80211 option channel 1 option hwmode 11g txpower 15 option path 'platform/ar231x-wmac.0' # option path berbeda untuk NS2 NSM2 Bullet dll # REMOVE THIS LINE TO ENABLE WIFI: option disabled 0 config wifi-iface option device radio0 option network MESH option mode adhoc option ssid MESH option encryption none option bssid 02:CA:FF:EE:BA:BE
Konfigurasi IP address MESH
Set IP statik melalui perintah
vi /etc/config/network
Isi kira-kira
config interface loopback option ifname lo option proto static option ipaddr 127.0.0.1 option netmask 255.0.0.0 config interface lan option ifname eth0 option type bridge option proto static option ipaddr 192.168.1.1 option netmask 255.255.255.0 # konfigurasi berikut penting untuk MESH # config interface 'MESH' option _orig_ifname 'wlan0' option _orig_bridge 'false' option proto 'static' option ipaddr 10.123.123.223 # (SETIAP NODE HARUS menggunakan IP yang BEDA!!) option netmask 255.0.0.0
Setup NAT melalui MESH
Sebaiknya buat setup Firewall
rm /etc/config/firewall
Buat NAT di /etc/rc.local saja
Set agar NAT dan OLSR start waktu booting
Edit rc.local
vi /etc/rc.local
Isi
ifconfig wlan0 10.123.123.223 netmask 255.0.0.0 (IP ADDRESS sama dengan IP addres di /etc/config/network di ATAS) echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE /etc/init.d/telnet stop /etc/init.d/olsrd stop olsrd -f /etc/olsrd.conf & exit 0
Nampaknya NAT sebaiknya di aktifkan di rc.local.
Semua setting /etc/config/firewall di matikan agar OLSR tidak rewel.
Buat file /etc/olsrd.conf
Edit
vi /etc/olsrd.conf
Isi dengan
Hna4 { # 0.0.0.0 0.0.0.0 # JIKA INGIN memberitahukan bahwa kita adalah gateway ke Internet # 192.168.0.0 255.255.255.0 # JIKA INGIN memberitahukan kita gateway ke 192.168.0.0/24 } Hna6 { } LoadPlugin "olsrd_nameservice.so.0.3" { } LoadPlugin "olsrd_txtinfo.so.0.1" { PlParam "accept" "0.0.0.0" } InterfaceDefaults { } Interface "wlan0" { Mode "mesh" }
Pranala Menarik
- OpenWRT
- OpenWRT: Download Firmware yang sudah jadi
- OpenWRT: Source Repository Download
- OpenWRT: Melihat Daftar Package
Build Firmware
- OpenWRT: Build Firmware
- OpenWRT: Build Firmware Download Source Pendukung
- OpenWRT: Build Firmware Buffalo WZRHPG450H
- OpenWRT: Build Firmware Buffalo WZRHPG300N
- OpenWRT: Build Firmware Buffalo WZRHPG300NH2
- Buffalo
- Buffalo: WZRHPG450H Cara Recovery
- Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash
- Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri RECOMMENDED
- Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD
- OpenWRT: Build Firmware Ubiquiti NanoStation2 RECOMMENDED
- OpenWRT: Build Firmware Ubiquiti NanoStationM2 RECOMMENDED
- OpenWRT: Build Firmware Mikrotik RB433
- OpenWRT: Build Firmware Linksys WRT160NL
- OpenWRT: Build Firmware Linksys WRT54GL
APRX
IPv6
- OpenWRT: IPv6
- OpenWRT IPv6: Build Firmware Linksys WRT160NL
- OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI
- OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H
- OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2
- OpenWRT IPv6: Setup tunnel ke tunnelbroker
- OpenWRT IPv6: Konfigurasi
- OpenWRT IPv6: Konfigurasi WAN6 dengan radvd
Flash Firmware
- OpenWRT: Flash Linksys WRT54GL
- OpenWRT: Flash Linksys WRT160NL
- OpenWRT: Flash Buffalo WZRHP450H RECOMMENDED
- OpenWRT: Flash Buffalo WZRHP300N
- OpenWRT: Flash UBNT NanoStation2 RECOMMENDED
- OpenWRT: Flash UBNT NanoStation M2 RECOMMENDED
- OpenWRT: Flash UBNT NanoStation Loco M2
- OpenWRT: Flash UBNT Bullet M2 RECOMMENDED
- OpenWRT: Flash Mikrotik RB433 RECOMMENDED
- OpenWRT: Flash Mikrotik RB450
Misc
- OpenWRT: Setup WiFi
- OpenWRT: Setup PPTP VPN Server
- OpenWRT: Setup OLSR di UBNT via CLI RECOMMENDED
- OpenWRT: Mikrotik RB433
- OpenWRT: Setup OLSR Sederhana
- OLSR - di OpenWRT
- OpenWRT: 3G modem
- OpenWRT: Build Firmware dengan 3G Modem Support
- OpenWRT: Setup Firewall
- OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
UBNT
- UBNT
- UBNT: Teknik Recovery
- UBNT: Upload Firmware
- UBNT: Rebuild Firmware
- UBNT: firmware dengan OLSR
- UBNT: openwrt
- UBNT: olsr dengan openwrt
- UBNT: olsr dengan kamikaze openwrt
- UBNT: olsr dengan backfire openwrt RECOMMENDED
- UBNT: UniFi
- UBNT: UniFi Konfigurasi Awal
- UBNT: UniFi Manajemen HotSpot
- UBNT: OLSR Pembuatan Firmware
- UBNT: OLSR Konfigurasi
- OLSR - di UBNT
- OLSR - di Ubuntu
- OpenWRT
- OLSR: NAT di UBNT dengan OLSR