Difference between revisions of "OpenWRT: Setup OLSR di UBNT via CLI"

Revision as of 19:12, 10 December 2013

Reset Password Root

Reset password root melalui telnet ke 192.168.1.1

telnet 192.168.1.1

Tampilan

Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------


BusyBox v1.19.4 (2013-04-10 18:38:45 WIT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r36235)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------

root@OpenWrt:/# passwd
Changing password for root
New password:
Retype password:
Password for root changed by root

Konfigurasi Wireless

Konfigurasi wireless dan mengaktifkan sebagai adhoc pada channel 1.

vi /etc/config/wireless

Isinya kira-kira

config wifi-device  radio0
        option type     mac80211
        option channel  1
        option hwmode   11g
        txpower         15
        option path     'platform/ar231x-wmac.0'

        # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 0

config wifi-iface
        option device   radio0
        option network  mesh
        option mode     adhoc
        option ssid     MESH
        option encryption none
        option bssid    02:CA:FF:EE:BA:BE

Konfigurasi IP address MESH

Set IP statik melalui perintah

vi /etc/config/network

Isi kira-kira

config interface loopback
        option ifname   lo
        option proto    static
        option ipaddr   127.0.0.1
        option netmask  255.0.0.0 

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0

config interface 'mesh'
	option _orig_ifname 'wlan0'
	option _orig_bridge 'false'
	option proto 'static'
       option ipaddr   10.123.123.223 (SETIAP NODE HARUS menggunakan IP yang BEDA!!)
       option netmask  255.0.0.0

Set agar OLSR start waktu booting

Edit rc.local

vi /etc/rc.local

Isi

ifconfig wlan0 10.123.123.223 netmask 255.0.0.0 (IP ADDRESS sama dengan IP addres di /etc/config/network  di ATAS)
/etc/init.d/telnet stop
/etc/init.d/olsrd stop
olsrd -f /etc/olsrd.conf &

exit 0

Buat file /etc/olsrd.conf

Edit

vi /etc/olsrd.conf

Isi dengan

Hna4
{
# 0.0.0.0 0.0.0.0            # JIKA INGIN memberitahukan bahwa kita adalah gateway ke Internet
# 192.168.0.0 255.255.255.0  # JIKA INGIN memberitahukan kita gateway ke 192.168.0.0/24
}

Hna6
{
}

LoadPlugin "olsrd_nameservice.so.0.3"
{
}

LoadPlugin "olsrd_txtinfo.so.0.1"
{
   PlParam "accept" "0.0.0.0"
}

InterfaceDefaults
{
}

Interface "wlan0"
{
    Mode "mesh"
}

Pranala Menarik

Build Firmware

APRX

OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX

IPv6

Flash Firmware

OpenWRT: Flash Linksys WRT54GL
OpenWRT: Flash Linksys WRT160NL
OpenWRT: Flash Buffalo WZRHP450H RECOMMENDED
OpenWRT: Flash Buffalo WZRHP300N
OpenWRT: Flash UBNT NanoStation2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation M2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation Loco M2
OpenWRT: Flash UBNT Bullet M2 RECOMMENDED

@@ Line 158: / Line 158: @@
 * [[OpenWRT: Build Firmware]]
+* [[OpenWRT: Build Firmware Download Source Pendukung]]
 * [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 * [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
+* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 * [[Buffalo]]
 * [[Buffalo: WZRHPG450H Cara Recovery]]
 * [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
-* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''COOL'''
+* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
 * [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
-* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]]
+* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
+* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
 * [[OpenWRT: Build Firmware Mikrotik RB433]]
 * [[OpenWRT: Build Firmware Linksys WRT160NL]]
 * [[OpenWRT: Build Firmware Linksys WRT54GL]]
+* [[OpenWRT: Build Firmware Mikrotik RB433]]
+===APRX===
+* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
+===IPv6===
+* [[OpenWRT: IPv6]]
+* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
+* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
+* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
+* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
+* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
+* [[OpenWRT IPv6: Konfigurasi]]
+* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
 ===Flash Firmware===
@@ Line 174: / Line 194: @@
 * [[OpenWRT: Flash Linksys WRT54GL]]
 * [[OpenWRT: Flash Linksys WRT160NL]]
-* [[OpenWRT: Flash Buffalo WZRHP450H]]
+* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
 * [[OpenWRT: Flash Buffalo WZRHP300N]]
-* [[OpenWRT: Flash UBNT NanoStation2]]
+* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
-* [[OpenWRT: Flash UBNT NanoStation M2]]
+* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
 * [[OpenWRT: Flash UBNT NanoStation Loco M2]]
+* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 ===Misc===
-* [[OpenWRT: Setup OLSR di UBNT via CLI]]
+* [[OpenWRT: Setup WiFi]]
+* [[OpenWRT: Setup PPTP VPN Server]]
+* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
 * [[OpenWRT: Mikrotik RB433]]
 * [[OpenWRT: Setup OLSR Sederhana]]
@@ Line 190: / Line 213: @@
 * [[OpenWRT: Setup Firewall]]
 * [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
+===UBNT===
 * [[UBNT]]
+* [[UBNT: Teknik Recovery]]
+* [[UBNT: Upload Firmware]]
+* [[UBNT: Rebuild Firmware]]
+* [[UBNT: firmware dengan OLSR]]
+* [[UBNT: openwrt]]
+* [[UBNT: olsr dengan openwrt]]
+* [[UBNT: olsr dengan kamikaze openwrt]]
+* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
+* [[UBNT: UniFi]]
+* [[UBNT: UniFi Konfigurasi Awal]]
+* [[UBNT: UniFi Manajemen HotSpot]]
+* [[UBNT: OLSR Pembuatan Firmware]]
+* [[UBNT: OLSR Konfigurasi]]
+* [[OLSR - di UBNT]]
+* [[OLSR - di Ubuntu]]
+* [[OpenWRT]]
+* [[OLSR: NAT di UBNT dengan OLSR]]