Difference between revisions of "OpenWRT: Build Firmware Linksys WRT1900AC"

From OnnoWiki
Jump to navigation Jump to search
 
(33 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
WARNING: ini akan membutuhkan banyak akses ke Internet untuk download, termasuk waktu proses make. Termasuk download kernel linux, waktu compile toolchain :( ... Tampaknya tidak bisa OFFLINE :(
 +
 
==Spesifikasi==
 
==Spesifikasi==
  
Line 13: Line 15:
 
  Output Power: 2.4GHz: 19dBm
 
  Output Power: 2.4GHz: 19dBm
 
  5GHz: 21dBm
 
  5GHz: 21dBm
−
Warranty: 2 year hardware limited warranty
 
−
OS Compatibility: Windows, Mac
 
−
Minimum System Requirements: PC with CD or DVD drive, running Windows XP SP3 (32-bit), Vista SP1/SP2 (32 & 64-bit), Win7 (32-bit & 64-bit) and Win8 (32-bit & 64-bit)
 
−
Mac: Wi-Fi enabled with CD or DVD drive, Mac OS® X Leopard v10.5.8 or later, Snow Leopard v10.6.1 or later, Lion v10.7, or Mountain Lion v10.8 Available USB 2.0 port
 
−
Package Contents: Linksys Dual Band Gigabit Wi-Fi Router AC1900, WRT1900AC, Quick Start Guide, CD-ROM with Documentation, 4 Antennas, Ethernet Cable, Power Adapter, Power Cord
 
  
 
Hardware Highlights:
 
Hardware Highlights:
 
  SoC Ram Flash Network USB Serial JTag eSata
 
  SoC Ram Flash Network USB Serial JTag eSata
−
  Marvell MV78230 256 MiB 128 MiB 1×2.0 1×3.0 Yes
+
  Marvell MV78230 256 MiB 128 MiB 1×2.0 1×3.0 Yes
 +
 
 +
 
 +
==Persiapan Compile OpenWRT==
 +
 
 +
Dalam contoh ini akan di perlihatkan cara compile firmware Buffalo WZR HP G450H. Beberapa aplikasi menarik yang di instalasi antara lain adalah,
 +
 
 +
* luci
 +
* ipv6
 +
* quagga
 +
* ipsec
 +
* iotvity
 +
* freifunk
 +
 
 +
Pastikan
 +
* Compile untuk Marvell Armada 37x/38x/XP
 +
* Profile Linksys WRT1900AC (Mamba)
  
 +
==Siapkan Pendukung==
  
−
==Siapkan Aplikasi Pendukung==
+
Lakukan
  
 
  sudo su
 
  sudo su
Line 33: Line 47:
  
 
  cd /usr/local/src
 
  cd /usr/local/src
−
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.43.tar.gz
+
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
−
  tar zxvf XML-Parser-2.43.tar.gz
+
  tar zxvf XML-Parser-2.44.tar.gz
−
  cd /usr/local/src/XML-Parser-2.43
+
  cd /usr/local/src/XML-Parser-2.44
 
  perl Makefile.PL
 
  perl Makefile.PL
 
  make install
 
  make install
  
−
==Download source code==
+
==Compile Menggunakan Development Trunk==
−
 
 
−
Download source code untuk WRT1900AC sekitar 700Mbyte-an
 
  
−
cd ~
+
Development Trunk tampaknya paling '''RECOMMENDED'''
−
git clone https://github.com/jimmychungbelkin/Mamba
 
  
−
Source code akan berada di
+
Lakukan sebagai '''user biasa'''
  
−
  ~/Mamba
+
  svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
 +
cd ~/openwrt.trunk/trunk/
 
  ./scripts/feeds update
 
  ./scripts/feeds update
 
  ./scripts/feeds install meshwizard openssh-server openssh-client
 
  ./scripts/feeds install meshwizard openssh-server openssh-client
Line 64: Line 76:
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
 
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
 
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
 +
./scripts/feeds install quagga
 
  ./scripts/feeds update -a
 
  ./scripts/feeds update -a
 
  ./scripts/feeds install -a
 
  ./scripts/feeds install -a
Line 69: Line 82:
 
  make defconfig
 
  make defconfig
 
  make menuconfig
 
  make menuconfig
−
  make world
+
  make j=4 world
  
 
==Setup Menuconfig==
 
==Setup Menuconfig==
  
−
For WRT1900AC:
+
Menuconfig untuk Firmware Linksys WRT1900AC
−
The "Target System" in make menuconfig should be set to "Marvell Armada XP/370"
 
−
The "Subtarget" in make menuconfig should be set to "Mamba"
 
−
In "Target Images" in make menuconfig you should enable "jffs2"
 
  
 +
Target System > Marvell Armada 37x/38x/XP
 +
Target Profile > Linksys WRT1900AC (Mamba)
 +
Target Images > tar.gz
 +
Base system > bridge
 +
Network >
 +
    bmon
 +
    chat
 +
    ds-lite
 +
    gre
 +
        grev4
 +
        grev6
 +
    iftop
 +
    iperf
 +
    iperf3
 +
    ipip
 +
    ipset
 +
    ipset-dns
 +
    iputils-arping
 +
    iputils-clockdiff
 +
    iputils-ping
 +
    iputils-ping6
 +
    iputils-tftpd
 +
    iputils-tracepath
 +
    iputils-tracepath6
 +
    iputils-traceroute6
 +
    iw
 +
    ppp
 +
        ppp-mod-pppoa
 +
        ppp-mod-pppoe
 +
        ppp-mod-pppol2tp
 +
        ppp-mod-pptp 
 +
        ppp-mod-radius
 +
    ppp-multilink
 +
        pppdump
 +
        pppstats
 +
Network > Routing and Redirection >
 +
    babel-pinger
 +
    babeld
 +
    batmand
 +
    bird4
 +
    bird4-uci
 +
    bird6
 +
    bird6-uci
 +
    birdc4
 +
    birdc6
 +
    birdcl4
 +
    birdcl6
 +
    ip
 +
    ip-bridge
 +
    ip-full
 +
    mwan3
 +
Network > Routing and Redirection > relayd
 +
Network > Routing and Redirection > olsrd
 +
Network > Routing and Redirection > olsrd >
 +
    olsrd-mod-arprefresh
 +
    olsrd-mod-bmf
 +
    olsrd-mod-dot-draw
 +
    olsrd-mod-dyn-gw
 +
    olsrd-mod-dyn-gw-plain
 +
    olsrd-mod-httpinfo
 +
    olsrd-mod-jsoninfo
 +
    olsrd-mod-mdns
 +
    olsrd-mod-nameservice
 +
    olsrd-mod-p2pd
 +
    olsrd-mod-pgraph
 +
    olsrd-mod-quagga
 +
    olsrd-mod-secure
 +
    olsrd-mod-tas
 +
    olsrd-mod-txtinfo
 +
    olsrd-mod-watchdog
 +
Network > Routing and Redirection > quagga
 +
    quagga-babeld
 +
    quagga-bgpd
 +
    quagga-isisd
 +
    quagga-libospf
 +
    quagga-libzebra
 +
    quagga-ospf6d
 +
    quagga-ospfd
 +
    quagga-ripd
 +
    quagga-ripngd
 +
    quagga-vtysh
 +
    quagga-watchquagga
 +
    quagga-zebra
 +
Network > SSH > openssh-server
 +
Network > Time Synchronization > ntpclient
 +
Network > Web Servers/Proxies > uhttpd
 +
                                uhttpd-mod-lua
 +
                                uhttpd-mod-tls
 +
                                uhttpd-mod-ubus
 +
Network > 6in4
 +
          6rd
 +
          6to4
 +
          ahcpd                   
 +
          hostapd
 +
          hostapd-mini
 +
          hostapd-utils
 +
          multiwan
 +
          samba36-client
 +
          samba36-server
 +
          tayga
 +
          tc
 +
          vnstat
 +
          vnstati
 +
          wshaper
 +
          wwan
 +
Network > IP Addresses and Names >
 +
          bind-host
 +
          bind-server
 +
          ddns-scripts
 +
Network > VPN >
 +
          ipsec-tools
 +
LuCI > 1. Collections >
 +
            luci
 +
            luci-ssl
 +
        2. Modules >
 +
            luci-mod-freifunk
 +
        3. Applications >
 +
            luci-app-freifunk-policyrouting
 +
            luci-app-meshwizard
 +
            luci-app-multiwan
 +
            luci-app-ntpc
 +
            luci-app-olsr
 +
            luci-app-olsr-services
 +
            luci-app-olsr-viz
 +
            luci-app-p2pblock
 +
            luci-app-samba
 +
            luci-app-statistics
 +
            luci-app-vnstat
 +
            luci-app-wshaper
 +
        4. Themes >
 +
            luci-theme-bootstrap
 +
            luci-theme-freifunk-bno
 +
            luci-theme-freifunk-generic
 +
        6. Protocols >
 +
            luci-proto-3g
 +
        7. Server Interfaces >
 +
            luci-sgi-uhttpd
 +
        9. Freifunk >
 +
            luci-mod-freifunk-community
 +
            meshwizard
 +
Kernel modules > Filesystems >
 +
    kmod-fs-ntfs
 +
    kmod-fs-vfat
 +
Kernel modules > Wireless Drivers >
 +
    kmod-ath9k-htc
 +
    kmod-ath9k-common
 +
    kmod-ath9k
 +
Kernel modules > Network Support >
 +
    kmod-bridge
 +
    kmod-pptp
 +
    kmod-wprobe
 +
Kernel Modules > USB Support >
 +
    kmod-usb-acm
 +
    kmod-usb-atm
 +
    kmod-usb-atm-cxacru
 +
    kmod-usb-atm-speedtouch
 +
    kmod-usb-atm-ueagle
 +
    kmod-usb-cm109
 +
    kmod-usb-core
 +
    kmod-usb-dwc2
 +
    kmod-usb-dwc3
 +
    kmod-usb-hid
 +
    kmod-usb-net
 +
    kmod-usb-net-asix
 +
    kmod-usb-net-cdc-eem
 +
    kmod-usb-net-cdc-ether
 +
    kmod-usb-net-cdc-mbim
 +
    kmod-usb-net-cdc-ncm
 +
    kmod-usb-net-cdc-subset
 +
    kmod-usb-net-dm9601-ether
 +
    kmod-usb-net-hso
 +
    kmod-usb-net-ipheth
 +
    kmod-usb-net-kalmia
 +
    kmod-usb-net-kaweth
 +
    kmod-usb-net-mcs7830
 +
    kmod-usb-net-pegasus
 +
    kmod-usb-net-qmi-wwan
 +
    kmod-usb-net-rndis
 +
    kmod-usb-net-rtl8150
 +
    kmod-usb-net-rtl8152
 +
    kmod-usb-net-sierrawireless
 +
    kmod-usb-net-smsc95xx 
 +
    kmod-usb-ohci
 +
    kmod-usb-ohci-pci
 +
    kmod-usb-printer
 +
    kmod-usb-serial
 +
    kmod-usb-serial-ark3116
 +
    kmod-usb-serial-belkin
 +
    kmod-usb-serial-ch341
 +
    kmod-usb-serial-cp210x
 +
    kmod-usb-serial-cypress-m8
 +
    kmod-usb-serial-dmx_usb_module
 +
    kmod-usb-serial-ftdi
 +
    kmod-usb-serial-garmin
 +
    kmod-usb-serial-ipw
 +
    kmod-usb-serial-keyspan
 +
    kmod-usb-serial-mct
 +
    kmod-usb-serial-mos7720
 +
    kmod-usb-serial-option
 +
    kmod-usb-serial-oti6858
 +
    kmod-usb-serial-pl2303
 +
    kmod-usb-serial-qualcomm
 +
    kmod-usb-serial-sierrawireless
 +
    kmod-usb-serial-simple
 +
    kmod-usb-serial-ti-usb
 +
    kmod-usb-serial-visor
 +
    kmod-usb-serial-wwan
 +
    kmod-usb-storage
 +
    kmod-usb-storage-extras
 +
    kmod-usb-uhci
 +
    kmod-usb-wdm
 +
    kmod-usb-yealink
 +
    kmod-usb2
 +
    kmod-usb2-pci
 +
    kmod-usb3
 +
    kmod-usbip
 +
    kmod-usbip-client
 +
    kmod-usbip-server
 +
    kmod-usbmon
 +
Utilities >
 +
    gammu
 +
    iconv
 +
    iwinfo
 +
    jshn
 +
    smstools3
 +
    uboot-envtools
 +
    usb-modeswitch
 +
    usbreset
 +
    usbutils
 +
Mail > msmtp
 +
        msmtp-nossl
 +
        msmtp-queue
  
 +
==Update SVN==
  
 +
Untuk update SVN, di folder trunk lakukan
  
−
Barrier Breaker
+
cd ~/openwrt.trunk/trunk/
−
=======
+
svn cleanup
−
Barrier-Breaker/openwrt-armadaxp--jffs2-128k.img - prebuilt image based on OpenWrt Barrier-Breaker
+
svn update
−
Barrier-Breaker/patch_submission_1.6.tar.gz - patch files for standard OpenWrt Package
+
./scripts/feeds update
  
−
OpenWRT git base revision: e97be7a104e5c809ae4638cf169823249a505698
+
==Lokasi Image==
−
OpenWRT svn base revision: 40006
 
  
 +
Lokasi image ada di
  
−
==Lokasi image==
+
~/openwrt.trunk/trunk/bin/mvebu/
  
−
After the build completes the firmware image for the WRT1900AC will be
+
==Referensi==
−
located at:
+
 
 +
* http://wiki.openwrt.org/doc/howto/build
 +
 
 +
==Pranala Menarik==
  
−
./bin/mvebu/openwrt-mvebu-mamba-jffs2-128k.img
+
* [[OpenWRT]]
 +
* [[OpenWRT: Download Firmware yang sudah jadi]]
 +
* [[OpenWRT: Source Repository Download]]
 +
* [[OpenWRT: Melihat Daftar Package]]
 +
* [[OpenWRT: Mengembalikan setting default Config.in]]
  
 +
===Build Firmware===
  
−
==Update Image==
+
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[Buffalo]]
 +
* [[Buffalo: WZRHPG450H Cara Recovery]]
 +
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 +
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
 +
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
  
−
How to update from Belkin/Linksys UI
+
===APRX===
  
−
* Login into WRT1900AC local UI
 
−
* Navigate to the Connectivity tab
 
−
* Select Manual firmware update
 
−
* Select image to load (e.g., openwrt-armadaxp--jffs2-128k.img)
 
−
* Select Update firmware
 
  
−
After the firmware is updated, the unit will reboot, and the default ip address will be 192.168.200.1
+
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
 +
* [[OpenWRT: Setup APRX]]
  
−
The OpenWrt system is documented in docs/. You will need a LaTeX distribution
+
===IPv6===
−
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.
 
  
−
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
+
* [[OpenWRT: IPv6]]
−
(case-sensitive filesystem required). Cygwin will not be supported because of
+
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
−
the lack of case sensitiveness in the file system.
+
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
  
 +
===Flash Firmware===
  
−
==Referensi==
+
* [[OpenWRT: Flash Linksys WRT54GL]]
 +
* [[OpenWRT: Flash Linksys WRT160NL]]
 +
* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 +
* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB450]]
 +
 
 +
===Misc===
 +
 
 +
* [[OpenWRT: CLI]]
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 +
* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
 +
* [[OpenWRT: Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Setup OLSR Sederhana]]
 +
* [[OpenWRT: Setup OLSR via Web]] '''RECOMMENDED'''
 +
* [[OLSR - di OpenWRT]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[OpenWRT: Setup Firewall]]
 +
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
* [[OpenWRT: OLSR nameservice plugin]]
 +
* [[OpenWRT: VLAN]]
 +
 
 +
===UBNT===
  
−
* https://github.com/wrt1900ac/opensource
+
* [[UBNT]]
−
* http://wjianz.wordpress.com/2014/09/18/useful-links-on-building-openwrt-for-wrt1900ac/
+
* [[UBNT: Teknik Recovery]]
−
* https://github.com/jimmychungbelkin/Mamba/blob/master/Mamba_Openwrt_SDK_QS_v4.8.txt
+
* [[UBNT: Upload Firmware]]
−
* https://github.com/Chadster766/McWRT/releases
+
* [[UBNT: Rebuild Firmware]]
−
* http://support.linksys.com/en-us/support/routers/WRT1900AC
+
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]]
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]
 +
* [[OLSR: NAT di UBNT dengan OLSR]]

Latest revision as of 09:44, 12 July 2015

WARNING: ini akan membutuhkan banyak akses ke Internet untuk download, termasuk waktu proses make. Termasuk download kernel linux, waktu compile toolchain :( ... Tampaknya tidak bisa OFFLINE :(

Spesifikasi

Model: 	Linksys WRT1900AC
Technology: 	Wireless-AC
Standards: 	802.11a, 802.11b, 802.11g, 802.11n. 802.11ac
Frequency: 	Dual
Bands: 	Simultaneous: 2.4 GHz (Wireless-N), 5.0 GHz (Wireless-AC)
Security: 	WEP 64/128-bit, WPA2-Personal & Enterpise (AES/TKIP), WPS
Antennas: 	4x External Detachable Antennas
Antenna Gain (peak): 	2.4GHz: 2.5dBi
5GHz: 3.8dBi
Antenna Type: 	Dipole
Output Power: 	2.4GHz: 19dBm
5GHz: 21dBm

Hardware Highlights: 

SoC 	Ram 	Flash 	Network 	USB 	Serial 	JTag 	eSata
Marvell MV78230 	256 MiB 	128 MiB 		1×2.0 1×3.0 	Yes


Persiapan Compile OpenWRT

Dalam contoh ini akan di perlihatkan cara compile firmware Buffalo WZR HP G450H. Beberapa aplikasi menarik yang di instalasi antara lain adalah,

  • luci
  • ipv6
  • quagga
  • ipsec
  • iotvity
  • freifunk

Pastikan

  • Compile untuk Marvell Armada 37x/38x/XP
  • Profile Linksys WRT1900AC (Mamba)

Siapkan Pendukung

Lakukan 

sudo su
apt-get update
apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \
fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \
libexpat1 libexpat1-dev libssl-dev

cd /usr/local/src
wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
tar zxvf XML-Parser-2.44.tar.gz
cd /usr/local/src/XML-Parser-2.44
perl Makefile.PL
make install

Compile Menggunakan Development Trunk

Development Trunk tampaknya paling RECOMMENDED

Lakukan sebagai user biasa 

svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
cd ~/openwrt.trunk/trunk/
./scripts/feeds update
./scripts/feeds install meshwizard openssh-server openssh-client
./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate
./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services
./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk
./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw
./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw
./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo
./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf
./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna
./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
./scripts/feeds install quagga
./scripts/feeds update -a
./scripts/feeds install -a
make clean
make defconfig
make menuconfig
make j=4 world

Setup Menuconfig

Menuconfig untuk Firmware Linksys WRT1900AC 

Target System > Marvell Armada 37x/38x/XP
Target Profile > Linksys WRT1900AC (Mamba)
Target Images > tar.gz 
Base system > bridge
Network >
    bmon
    chat
    ds-lite
    gre
       grev4
       grev6
    iftop
    iperf
    iperf3
    ipip
    ipset
    ipset-dns
    iputils-arping
    iputils-clockdiff
    iputils-ping
    iputils-ping6
    iputils-tftpd
    iputils-tracepath
    iputils-tracepath6
    iputils-traceroute6
    iw
    ppp
       ppp-mod-pppoa
       ppp-mod-pppoe
       ppp-mod-pppol2tp
       ppp-mod-pptp  
       ppp-mod-radius
    ppp-multilink
       pppdump 
       pppstats
Network > Routing and Redirection >
    babel-pinger
    babeld
    batmand
    bird4
    bird4-uci
    bird6
    bird6-uci
    birdc4
    birdc6
    birdcl4
    birdcl6
    ip
    ip-bridge
    ip-full
    mwan3
Network > Routing and Redirection > relayd
Network > Routing and Redirection > olsrd
Network > Routing and Redirection > olsrd >
    olsrd-mod-arprefresh
    olsrd-mod-bmf
    olsrd-mod-dot-draw
    olsrd-mod-dyn-gw
    olsrd-mod-dyn-gw-plain
    olsrd-mod-httpinfo
    olsrd-mod-jsoninfo
    olsrd-mod-mdns
    olsrd-mod-nameservice
    olsrd-mod-p2pd
    olsrd-mod-pgraph
    olsrd-mod-quagga
    olsrd-mod-secure
    olsrd-mod-tas
    olsrd-mod-txtinfo
    olsrd-mod-watchdog
Network > Routing and Redirection > quagga
    quagga-babeld
    quagga-bgpd
    quagga-isisd
    quagga-libospf
    quagga-libzebra
    quagga-ospf6d
    quagga-ospfd
    quagga-ripd
    quagga-ripngd
    quagga-vtysh
    quagga-watchquagga
    quagga-zebra
Network > SSH > openssh-server
Network > Time Synchronization > ntpclient
Network > Web Servers/Proxies > uhttpd
                                uhttpd-mod-lua
                                uhttpd-mod-tls
                                uhttpd-mod-ubus 
Network > 6in4
          6rd
          6to4
          ahcpd                    
          hostapd
          hostapd-mini
          hostapd-utils
          multiwan
          samba36-client
          samba36-server
          tayga
          tc
          vnstat
          vnstati
          wshaper
          wwan
Network > IP Addresses and Names >
          bind-host
          bind-server
          ddns-scripts
Network > VPN >
          ipsec-tools
LuCI > 1. Collections >
            luci
            luci-ssl
       2. Modules >
            luci-mod-freifunk
       3. Applications >
            luci-app-freifunk-policyrouting
            luci-app-meshwizard
            luci-app-multiwan
            luci-app-ntpc
            luci-app-olsr
            luci-app-olsr-services
            luci-app-olsr-viz
            luci-app-p2pblock
            luci-app-samba
            luci-app-statistics
            luci-app-vnstat
            luci-app-wshaper
       4. Themes >
            luci-theme-bootstrap
            luci-theme-freifunk-bno
            luci-theme-freifunk-generic
       6. Protocols >
            luci-proto-3g
       7. Server Interfaces >
            luci-sgi-uhttpd
       9. Freifunk >
            luci-mod-freifunk-community
            meshwizard
Kernel modules > Filesystems >
    kmod-fs-ntfs
    kmod-fs-vfat
Kernel modules > Wireless Drivers > 
    kmod-ath9k-htc
    kmod-ath9k-common
    kmod-ath9k
Kernel modules > Network Support >
    kmod-bridge
    kmod-pptp
    kmod-wprobe
Kernel Modules > USB Support >
    kmod-usb-acm
    kmod-usb-atm
    	kmod-usb-atm-cxacru
    	kmod-usb-atm-speedtouch
    	kmod-usb-atm-ueagle
    kmod-usb-cm109
    kmod-usb-core
    kmod-usb-dwc2
    kmod-usb-dwc3
    kmod-usb-hid
    kmod-usb-net
    	kmod-usb-net-asix
    	kmod-usb-net-cdc-eem
    	kmod-usb-net-cdc-ether
    	kmod-usb-net-cdc-mbim
    	kmod-usb-net-cdc-ncm
    	kmod-usb-net-cdc-subset
    	kmod-usb-net-dm9601-ether
    	kmod-usb-net-hso
    	kmod-usb-net-ipheth
    	kmod-usb-net-kalmia
    	kmod-usb-net-kaweth
    	kmod-usb-net-mcs7830
    	kmod-usb-net-pegasus
    	kmod-usb-net-qmi-wwan
    	kmod-usb-net-rndis
    	kmod-usb-net-rtl8150
    	kmod-usb-net-rtl8152
    	kmod-usb-net-sierrawireless
    	kmod-usb-net-smsc95xx  
    kmod-usb-ohci
    kmod-usb-ohci-pci
    kmod-usb-printer
    kmod-usb-serial
    	kmod-usb-serial-ark3116
    	kmod-usb-serial-belkin
    	kmod-usb-serial-ch341
    	kmod-usb-serial-cp210x
    	kmod-usb-serial-cypress-m8
    	kmod-usb-serial-dmx_usb_module
    	kmod-usb-serial-ftdi
    kmod-usb-serial-garmin
    kmod-usb-serial-ipw
    kmod-usb-serial-keyspan
    kmod-usb-serial-mct
    kmod-usb-serial-mos7720
    kmod-usb-serial-option
    kmod-usb-serial-oti6858
    kmod-usb-serial-pl2303
    kmod-usb-serial-qualcomm
    kmod-usb-serial-sierrawireless
    kmod-usb-serial-simple
    kmod-usb-serial-ti-usb
    kmod-usb-serial-visor
    kmod-usb-serial-wwan
    kmod-usb-storage
    kmod-usb-storage-extras
    kmod-usb-uhci
    kmod-usb-wdm
    kmod-usb-yealink
    kmod-usb2
    kmod-usb2-pci
    kmod-usb3
    kmod-usbip
    kmod-usbip-client
    kmod-usbip-server
    kmod-usbmon
Utilities >
    gammu
    iconv
    iwinfo
    jshn
    smstools3
    uboot-envtools
    usb-modeswitch
    usbreset
    usbutils
Mail > msmtp
       msmtp-nossl
       msmtp-queue

Update SVN

Untuk update SVN, di folder trunk lakukan 

cd ~/openwrt.trunk/trunk/
svn cleanup
svn update
./scripts/feeds update

Lokasi Image

Lokasi image ada di 

~/openwrt.trunk/trunk/bin/mvebu/

Referensi

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Build_Firmware_Linksys_WRT1900AC&oldid=43789"