Difference between revisions of "OpenWRT: Flash Buffalo WZRHP300N"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n | Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n | ||
| + | Install | ||
| + | |||
| + | sudo su | ||
| + | apt-get install curl | ||
Buat Script | Buat Script | ||
| Line 10: | Line 14: | ||
ifconfig eth0 192.168.11.2 | ifconfig eth0 192.168.11.2 | ||
arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | ||
| − | curl -T openwrt-ar71xx-generic-wzr-hp- | + | curl -T openwrt-19.07.0-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1 & |
| − | + | ||
| − | + | Buat Script | |
| − | + | ||
| − | + | vi setip.sh | |
| − | + | ||
| − | + | Isi dengan | |
| − | + | ||
| − | + | #!/bin/bash | |
| − | + | ||
| − | + | while [ true ]; | |
| − | + | do | |
| − | |||
| − | |||
| − | |||
ifconfig eth0 192.168.11.2 | ifconfig eth0 192.168.11.2 | ||
arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | arp -s 192.168.11.1 02:aa:bb:cc:dd:1a | ||
| + | done | ||
| + | |||
| + | |||
| + | Save script di tempat firmware openwrt tersebut berada. | ||
| + | |||
| + | chmod 777 pada script | ||
| + | |||
| + | chmod 777 *sh | ||
| + | |||
Save script di tempat firmware openwrt tersebut berada. | Save script di tempat firmware openwrt tersebut berada. | ||
| Line 39: | Line 49: | ||
* Jalankan | * Jalankan | ||
| + | ./setip.sh & | ||
./buatflashbuffalo.sh | ./buatflashbuffalo.sh | ||
| Line 73: | Line 84: | ||
* [[OpenWRT: Build Firmware]] | * [[OpenWRT: Build Firmware]] | ||
| + | * [[OpenWRT: Build Firmware Download Source Pendukung]] | ||
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]] | * [[OpenWRT: Build Firmware Buffalo WZRHPG450H]] | ||
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]] | * [[OpenWRT: Build Firmware Buffalo WZRHPG300N]] | ||
| + | * [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]] | ||
* [[Buffalo]] | * [[Buffalo]] | ||
* [[Buffalo: WZRHPG450H Cara Recovery]] | * [[Buffalo: WZRHPG450H Cara Recovery]] | ||
| Line 84: | Line 97: | ||
* [[OpenWRT: Build Firmware Linksys WRT160NL]] | * [[OpenWRT: Build Firmware Linksys WRT160NL]] | ||
* [[OpenWRT: Build Firmware Linksys WRT54GL]] | * [[OpenWRT: Build Firmware Linksys WRT54GL]] | ||
| + | |||
| + | ===IPv6=== | ||
| + | |||
| + | * [[OpenWRT: IPv6]] | ||
| + | * [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]] | ||
| + | * [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]] | ||
| + | * [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]] | ||
| + | * [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]] | ||
| + | * [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]] | ||
| + | * [[OpenWRT IPv6: Konfigurasi]] | ||
| + | * [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]] | ||
===Flash Firmware=== | ===Flash Firmware=== | ||
| Line 97: | Line 121: | ||
===Misc=== | ===Misc=== | ||
| + | * [[OpenWRT: Setup WiFi]] | ||
| + | * [[OpenWRT: Setup PPTP VPN Server]] | ||
* [[OpenWRT: Setup OLSR di UBNT via CLI]] | * [[OpenWRT: Setup OLSR di UBNT via CLI]] | ||
* [[OpenWRT: Mikrotik RB433]] | * [[OpenWRT: Mikrotik RB433]] | ||
Latest revision as of 12:38, 14 January 2020
Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
Install
sudo su apt-get install curl
Buat Script
vi buatflashbuffalo.sh
Isi dengan
ifconfig eth0 192.168.11.2 arp -s 192.168.11.1 02:aa:bb:cc:dd:1a curl -T openwrt-19.07.0-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1 &
Buat Script
vi setip.sh
Isi dengan
#!/bin/bash while [ true ]; do ifconfig eth0 192.168.11.2 arp -s 192.168.11.1 02:aa:bb:cc:dd:1a done
Save script di tempat firmware openwrt tersebut berada.
chmod 777 pada script
chmod 777 *sh
Save script di tempat firmware openwrt tersebut berada.
- Matikan Buffalo
- Masukan kabel LAN PC ke LAN4 Buffalo yang pas sebelah Internet.
- Masuk ke folder tempat image openwrt berada.
- Jadi superuser
sudo su
- Jalankan
./setip.sh & ./buatflashbuffalo.sh
- Masukan power Buffalo
Akan tampak pada layar
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 6656k 0 0 100 6656k 0 336k 0:00:19 0:00:19 --:--:-- 483k
100 6656k 0 0 100 6656k 0 336k 0:00:19 0:00:19 --:--:-- 336k
Jika kita cek arp -n akan tampak
arp -n
Address HWtype HWaddress Flags Mask Iface 192.168.11.1 ether 02:aa:bb:cc:dd:1a CM eth0
Referensi
Pranala Menarik
- OpenWRT
- OpenWRT: Download Firmware yang sudah jadi
- OpenWRT: Source Repository Download
- OpenWRT: Melihat Daftar Package
Build Firmware
- OpenWRT: Build Firmware
- OpenWRT: Build Firmware Download Source Pendukung
- OpenWRT: Build Firmware Buffalo WZRHPG450H
- OpenWRT: Build Firmware Buffalo WZRHPG300N
- OpenWRT: Build Firmware Buffalo WZRHPG300NH2
- Buffalo
- Buffalo: WZRHPG450H Cara Recovery
- Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash
- Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri COOL
- Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD
- OpenWRT: Build Firmware Ubiquiti NanoStation2
- OpenWRT: Build Firmware Mikrotik RB433
- OpenWRT: Build Firmware Linksys WRT160NL
- OpenWRT: Build Firmware Linksys WRT54GL
IPv6
- OpenWRT: IPv6
- OpenWRT IPv6: Build Firmware Linksys WRT160NL
- OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI
- OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H
- OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2
- OpenWRT IPv6: Setup tunnel ke tunnelbroker
- OpenWRT IPv6: Konfigurasi
- OpenWRT IPv6: Konfigurasi WAN6 dengan radvd
Flash Firmware
- OpenWRT: Flash Linksys WRT54GL
- OpenWRT: Flash Linksys WRT160NL
- OpenWRT: Flash Buffalo WZRHP450H
- OpenWRT: Flash Buffalo WZRHP300N
- OpenWRT: Flash UBNT NanoStation2
- OpenWRT: Flash UBNT NanoStation M2
- OpenWRT: Flash UBNT NanoStation Loco M2
Misc
- OpenWRT: Setup WiFi
- OpenWRT: Setup PPTP VPN Server
- OpenWRT: Setup OLSR di UBNT via CLI
- OpenWRT: Mikrotik RB433
- OpenWRT: Setup OLSR Sederhana
- OLSR - di OpenWRT
- OpenWRT: 3G modem
- OpenWRT: Build Firmware dengan 3G Modem Support
- OpenWRT: Setup Firewall
- OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
UBNT
- UBNT
- UBNT: Teknik Recovery
- UBNT: Upload Firmware
- UBNT: Rebuild Firmware
- UBNT: firmware dengan OLSR
- UBNT: openwrt
- UBNT: olsr dengan openwrt
- UBNT: olsr dengan kamikaze openwrt
- UBNT: olsr dengan backfire openwrt RECOMMENDED
- UBNT: UniFi
- UBNT: UniFi Konfigurasi Awal
- UBNT: UniFi Manajemen HotSpot
- UBNT: OLSR Pembuatan Firmware
- UBNT: OLSR Konfigurasi
- OLSR - di UBNT
- OLSR - di Ubuntu
- OpenWRT