Difference between revisions of "OpenWRT: Flash Buffalo WZRHP300N"

From OnnoWiki
Jump to navigation Jump to search
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
 
Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
  
 +
Install
 +
 +
sudo su
 +
apt-get install curl
  
 
Buat Script
 
Buat Script
Line 8: Line 12:
 
Isi dengan
 
Isi dengan
  
−
  ifconfig eth0:11 192.168.11.2
+
  ifconfig eth0 192.168.11.2
−
  arp -s 192.168.11.1 02:aa:bb:cc:dd:ff
+
  arp -s 192.168.11.1 02:aa:bb:cc:dd:1a
−
  curl -T openwrt-ar71xx-generic-wzr-hp-g300n-squashfs-tftp.bin tftp://192.168.11.1
+
  curl -T openwrt-19.07.0-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1 &
 +
 
 +
Buat Script
 +
 
 +
vi setip.sh
 +
 
 +
Isi dengan
 +
 
 +
#!/bin/bash
 +
 +
while [ true ];
 +
do
 +
ifconfig eth0 192.168.11.2
 +
arp -s 192.168.11.1 02:aa:bb:cc:dd:1a
 +
done
 +
 
 +
 
 +
Save script di tempat firmware openwrt tersebut berada.
 +
 
 +
chmod 777 pada script
 +
 
 +
chmod 777 *sh
 +
 
  
 
Save script di tempat firmware openwrt tersebut berada.
 
Save script di tempat firmware openwrt tersebut berada.
Line 21: Line 47:
 
   sudo su
 
   sudo su
  
−
* Masukan power Buffalo
+
* Jalankan
−
* Secepatnya jalankan
 
  
 +
./setip.sh &
 
  ./buatflashbuffalo.sh
 
  ./buatflashbuffalo.sh
 +
 +
* Masukan power Buffalo
  
 
Akan tampak pada layar
 
Akan tampak pada layar
Line 30: Line 58:
 
   % Total    % Received % Xferd  Average Speed  Time    Time    Time  Current
 
   % Total    % Received % Xferd  Average Speed  Time    Time    Time  Current
 
                                   Dload  Upload  Total  Spent    Left  Speed
 
                                   Dload  Upload  Total  Spent    Left  Speed
−
  100 2560k   0    0  100 2560k     0  197k 0:00:12 0:00:12 --:--:--  367k
+
  100 6656k   0    0  100 6656k     0  336k 0:00:19 0:00:19 --:--:--  483k
−
  100 2560k   0    0  100 2560k     0  197k 0:00:12 0:00:12 --:--:--  197k
+
  100 6656k   0    0  100 6656k     0  336k 0:00:19 0:00:19 --:--:--  336k
  
 
Jika kita cek arp -n akan tampak
 
Jika kita cek arp -n akan tampak
Line 38: Line 66:
  
 
  Address                  HWtype  HWaddress          Flags Mask            Iface
 
  Address                  HWtype  HWaddress          Flags Mask            Iface
−
  192.168.11.1            ether  02:aa:bb:cc:dd:23   CM                    eth0
+
  192.168.11.1            ether  02:aa:bb:cc:dd:1a   CM                    eth0
  
  
Line 45: Line 73:
  
 
* http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
 
* http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenWRT]]
 +
* [[OpenWRT: Download Firmware yang sudah jadi]]
 +
* [[OpenWRT: Source Repository Download]]
 +
* [[OpenWRT: Melihat Daftar Package]]
 +
 +
===Build Firmware===
 +
 +
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[Buffalo]]
 +
* [[Buffalo: WZRHPG450H Cara Recovery]]
 +
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 +
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''COOL'''
 +
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]]
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
 +
===IPv6===
 +
 +
* [[OpenWRT: IPv6]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
 +
 +
===Flash Firmware===
 +
 +
* [[OpenWRT: Flash Linksys WRT54GL]]
 +
* [[OpenWRT: Flash Linksys WRT160NL]]
 +
* [[OpenWRT: Flash Buffalo WZRHP450H]]
 +
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 +
* [[OpenWRT: Flash UBNT NanoStation2]]
 +
* [[OpenWRT: Flash UBNT NanoStation M2]]
 +
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
 +
===Misc===
 +
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 +
* [[OpenWRT: Setup OLSR di UBNT via CLI]]
 +
* [[OpenWRT: Mikrotik RB433]]
 +
* [[OpenWRT: Setup OLSR Sederhana]]
 +
* [[OLSR - di OpenWRT]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[OpenWRT: Setup Firewall]]
 +
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
 +
===UBNT===
 +
 +
* [[UBNT]]
 +
* [[UBNT: Teknik Recovery]]
 +
* [[UBNT: Upload Firmware]]
 +
* [[UBNT: Rebuild Firmware]]
 +
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]

Latest revision as of 12:38, 14 January 2020

Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n

Install 

sudo su
apt-get install curl

Buat Script 

vi buatflashbuffalo.sh

Isi dengan 

ifconfig eth0 192.168.11.2
arp -s 192.168.11.1 02:aa:bb:cc:dd:1a
curl -T openwrt-19.07.0-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1 &

Buat Script 

vi setip.sh

Isi dengan 

#!/bin/bash

while [ true ];
do
ifconfig eth0 192.168.11.2
arp -s 192.168.11.1 02:aa:bb:cc:dd:1a
done


Save script di tempat firmware openwrt tersebut berada.

chmod 777 pada script 

chmod 777 *sh


Save script di tempat firmware openwrt tersebut berada.

  • Matikan Buffalo
  • Masukan kabel LAN PC ke LAN4 Buffalo yang pas sebelah Internet.
  • Masuk ke folder tempat image openwrt berada.
  • Jadi superuser
 sudo su
  • Jalankan
./setip.sh &
./buatflashbuffalo.sh
  • Masukan power Buffalo

Akan tampak pada layar 

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 6656k    0     0  100 6656k      0   336k  0:00:19  0:00:19 --:--:--  483k
100 6656k    0     0  100 6656k      0   336k  0:00:19  0:00:19 --:--:--  336k

Jika kita cek arp -n akan tampak 

arp -n

Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.11.1             ether   02:aa:bb:cc:dd:1a   CM                    eth0


Referensi

Pranala Menarik

Build Firmware

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Flash_Buffalo_WZRHP300N&oldid=58548"