Difference between revisions of "OpenWRT: Setup OLSR di UBNT via CLI"

Latest revision as of 05:54, 27 February 2014

Reset Password Root

Reset password root melalui telnet ke 192.168.1.1

telnet 192.168.1.1

Tampilan

Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------


BusyBox v1.19.4 (2013-04-10 18:38:45 WIT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r36235)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------

root@OpenWrt:/# passwd
Changing password for root
New password:
Retype password:
Password for root changed by root

Konfigurasi Wireless

Konfigurasi wireless dan mengaktifkan sebagai adhoc pada channel 1.

vi /etc/config/wireless

Isinya kira-kira

config wifi-device  radio0
        option type     mac80211
        option channel  1
        option hwmode   11g
        txpower         15
        option path     'platform/ar231x-wmac.0'  # option path berbeda untuk NS2 NSM2 Bullet dll

        # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 0

config wifi-iface
        option device   radio0
        option network  MESH
        option mode     adhoc
        option ssid     MESH
        option encryption none
        option bssid    02:CA:FF:EE:BA:BE

Konfigurasi IP address MESH

Set IP statik melalui perintah

vi /etc/config/network

Isi kira-kira

config interface loopback
        option ifname   lo
        option proto    static
        option ipaddr   127.0.0.1
        option netmask  255.0.0.0 

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0

# konfigurasi berikut penting untuk MESH
#
config interface 'MESH'
	option _orig_ifname 'wlan0'
	option _orig_bridge 'false'
	option proto 'static'
       option ipaddr   10.123.123.223 # (SETIAP NODE HARUS menggunakan IP yang BEDA!!)
       option netmask  255.0.0.0

Setup NAT melalui MESH

Sebaiknya buat setup Firewall

rm /etc/config/firewall

Buat NAT di /etc/rc.local saja

Set agar NAT dan OLSR start waktu booting

Edit rc.local

vi /etc/rc.local

Isi

ifconfig wlan0 10.123.123.223 netmask 255.0.0.0 (IP ADDRESS sama dengan IP addres di /etc/config/network  di ATAS)
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
/etc/init.d/telnet stop
/etc/init.d/olsrd stop
olsrd -f /etc/olsrd.conf &

exit 0

Nampaknya NAT sebaiknya di aktifkan di rc.local. Semua setting /etc/config/firewall di matikan agar OLSR tidak rewel.

Buat file /etc/olsrd.conf

Edit

vi /etc/olsrd.conf

Isi dengan

# DebugLevel 0
# AllowNoInt yes
# IpVersion 4
# RtTable 111
# RtTableDefault 112

Hna4
{
# 0.0.0.0 0.0.0.0            # JIKA INGIN memberitahukan bahwa kita adalah gateway ke Internet
# 192.168.0.0 255.255.255.0  # JIKA INGIN memberitahukan kita gateway ke 192.168.0.0/24
}

Hna6
{
} 

LoadPlugin "olsrd_arprefresh.so.0.1"
{
}

LoadPlugin "olsrd_nameservice.so.0.3"
{
        PlParam "name" "NAMA-NODE-Mesh-ini"
        PlParam "latlon-file" "/var/run/latlon.js"
        PlParam "hosts-file" "/var/etc/hosts.olsr"
        PlParam "sighup-pid-file" "/var/run/dnsmasq.pid"
        PlParam "services-file" "/var/run/services_olsr"
        PlParam "suffix" ".olsr"
}

LoadPlugin "olsrd_txtinfo.so.0.1"   
{                                    
        PlParam "accept" "0.0.0.0"   
}                                    
                                                  
LoadPlugin "olsrd_watchdog.so.0.1"                
{                                                       
        PlParam "file" "/var/run/olsrd.watchdog"        
        PlParam "interval" "30"                         
}                                                       
                                                        
LoadPlugin "olsrd_jsoninfo.so.0.0"                      
{                                                       
}                                                       
                                  
InterfaceDefaults                 
{                                 
        Ip4Broadcast 255.255.255.255
}                                               
                                               
Interface "wlan0"                               
{
        mode mesh
}

Daftar lengkap olsrd plugin yang ada bisa dilihat di

/usr/lib

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

OpenWRT: Flash Linksys WRT54GL
OpenWRT: Flash Linksys WRT160NL
OpenWRT: Flash Buffalo WZRHP450H RECOMMENDED
OpenWRT: Flash Buffalo WZRHP300N
OpenWRT: Flash UBNT NanoStation2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation M2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation Loco M2
OpenWRT: Flash UBNT Bullet M2 RECOMMENDED
OpenWRT: Flash Mikrotik RB433 RECOMMENDED
OpenWRT: Flash Mikrotik RB450

Misc

OpenWRT: CLI
OpenWRT: Setup WiFi
OpenWRT: Setup PPTP VPN Server
OpenWRT: Setup OLSR di UBNT via CLI RECOMMENDED
OpenWRT: Mikrotik RB433 RECOMMENDED
OpenWRT: Setup OLSR Sederhana
OpenWRT: Setup OLSR via Web RECOMMENDED
OLSR - di OpenWRT
OpenWRT: 3G modem
OpenWRT: Build Firmware dengan 3G Modem Support
OpenWRT: Setup Firewall
OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
OpenWRT: OLSR nameservice plugin
OpenWRT: VLAN