Difference between revisions of "OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI"

From OnnoWiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 114: Line 114:
  
 
  reboot
 
  reboot
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenWRT]]
 +
* [[OpenWRT: Download Firmware yang sudah jadi]]
 +
* [[OpenWRT: Source Repository Download]]
 +
* [[OpenWRT: Melihat Daftar Package]]
 +
 +
===Build Firmware===
 +
 +
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Download Source Pendukung]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300N]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[Buffalo]]
 +
* [[Buffalo: WZRHPG450H Cara Recovery]]
 +
* [[Buffalo: WZRHPG450H OpenWRT mengaktifkan setelah di flash]]
 +
* '''[[Buffalo: WZRHPG450H Membuat Firmware OpenWRT Sendiri]]''' '''RECOMMENDED'''
 +
* [[Buffalo: WZRHPG450H OpenWRT instalasi aplikasi Pendukung OLSRD]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStationM2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT: Build Firmware Linksys WRT54GL]]
 +
 +
===APRX===
 +
 +
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG300NH2 untuk APRX]]
 +
 +
===IPv6===
 +
 +
* [[OpenWRT: IPv6]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL]]
 +
* [[OpenWRT IPv6: Build Firmware Linksys WRT160NL Tanpa WebGUI]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT IPv6: Build Firmware Buffalo WZRHPG300NH2]]
 +
* [[OpenWRT IPv6: Setup tunnel ke tunnelbroker]]
 +
* [[OpenWRT IPv6: Konfigurasi]]
 +
* [[OpenWRT IPv6: Konfigurasi WAN6 dengan radvd]]
 +
 +
===Flash Firmware===
 +
 +
* [[OpenWRT: Flash Linksys WRT54GL]]
 +
* [[OpenWRT: Flash Linksys WRT160NL]]
 +
* [[OpenWRT: Flash Buffalo WZRHP450H]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Buffalo WZRHP300N]]
 +
* [[OpenWRT: Flash UBNT NanoStation2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 +
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB450]]
 +
 +
===Misc===
 +
 +
* [[OpenWRT: Setup WiFi]]
 +
* [[OpenWRT: Setup PPTP VPN Server]]
 +
* [[OpenWRT: Setup OLSR di UBNT via CLI]] '''RECOMMENDED'''
 +
* [[OpenWRT: Mikrotik RB433]]
 +
* [[OpenWRT: Setup OLSR Sederhana]]
 +
* [[OLSR - di OpenWRT]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[OpenWRT: Setup Firewall]]
 +
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 +
 +
===UBNT===
 +
 +
* [[UBNT]]
 +
* [[UBNT: Teknik Recovery]]
 +
* [[UBNT: Upload Firmware]]
 +
* [[UBNT: Rebuild Firmware]]
 +
* [[UBNT: firmware dengan OLSR]]
 +
* [[UBNT: openwrt]]
 +
* [[UBNT: olsr dengan openwrt]]
 +
* [[UBNT: olsr dengan kamikaze openwrt]]
 +
* [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED'''
 +
* [[UBNT: UniFi]]
 +
* [[UBNT: UniFi Konfigurasi Awal]]
 +
* [[UBNT: UniFi Manajemen HotSpot]]
 +
* [[UBNT: OLSR Pembuatan Firmware]]
 +
* [[UBNT: OLSR Konfigurasi]]
 +
* [[OLSR - di UBNT]]
 +
* [[OLSR - di Ubuntu]]
 +
* [[OpenWRT]]
 +
* [[OLSR: NAT di UBNT dengan OLSR]]

Latest revision as of 18:03, 19 December 2013

Dalam salah satu contoh compile firmware di bagian sebelumnya adalah firmware OpenWRT yang sengaja di compile tanpa HTTP dan LuCI. Akibatnya, firmware tersebut jadi sangat ringan karena di operasikan tanpa WebGUI. Konfigurasinya sebetulnya relatif sederhana juga. Secara umum langkah yan perlu di lakukan ada empat (4) yaitu,

  • Aktifkan Wifi menjadi adhoc network.
  • Set IP address agar statik
  • Set /etc/olsrd.conf
  • Edit /etc/rc.local agar olsrd jalan dengan baik.


Aktifkan WiFi

Untuk mengaktifkan Wifi kita perlu mengedit, 

vi /etc/config/wireless

Masukan 

config wifi-device  radio0
        option type     mac80211
        option channel  1
        option macaddr  00:15:6d:da:ec:d1
        option hwmode   11g
        option antenna  auto
        option diversity 0
        option txpower  15 
        option disabled 0

config wifi-iface
        option device   radio0
        option network  mesh
        option mode     adhoc
        option ssid     MESH
        option encryption none
        option bssid    02:CA:FF:EE:BA:BE


Biasanya di konfigurasi awal /etc/config/wireless ada kata-kata 

# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1

Ubah menjadi option disable 0

Konfigurasi IP address Wireless

Edit konfigurasi IP address untuk wireless, 

vi /etc/config/network

Masukan 

config interface mesh
       option ifname   wlan0
       option type     bridge
       option proto    static
       option ipaddr   172.16.123.12
       option netmask  255.255.0.0

restart network 

/etc/init.d/network restart

cek di console apakah sudah operasional dengan baik, ketik perintah 


iwconfig

akan keluar kurang lebih 

wlan0     IEEE 802.11bg  ESSID:"MESH"  
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:CA:FF:EE:BA:BE   
          Tx-Power=15 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on

Konfigurasi OLSR

Edit konfigurasi olsrd 

vi /etc/olsrd.conf

Masukan 

Hna4
{                     
} 
Hna6  
{                                                    
}
LoadPlugin "olsrd_txtinfo.so.0.1"
{
    PlParam  "accept" "0.0.0.0"                                              
} 
InterfaceDefaults  
{                        
}
Interface "wlan0" "eth0" "br-lan"
{
     Mode "mesh"
}

Masukan rc.local

masukan ke /etc/rc.local 

ifconfig wlan0 172.16.123.12
/etc/init.d/olsrd stop
rm /var/run/olsrd-ipv4.lock 
olsrd -f /etc/olsrd.conf &

reboot

Selesai sudah proses konfigurasi UBNT NanoStation2 agar menjadi Mesh Node, kita perlu me-restart menggunakan perintah 

reboot

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Konfigurasi_UBNT_NanoStation2_tanpa_WebGUI&oldid=38959"