Difference between revisions of "OpenWRT: Flash UBNT Bullet M2"

From OnnoWiki
Jump to navigation Jump to search
Line 93: Line 93:
 
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 
* [[OpenWRT: Flash UBNT NanoStation Loco M2]]
 
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 
* [[OpenWRT: Flash UBNT Bullet M2]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB433]] '''RECOMMENDED'''
 +
* [[OpenWRT: Flash Mikrotik RB450]]
  
 
===Misc===
 
===Misc===

Revision as of 05:08, 14 December 2013

Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput code.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Matikan UBNT
  • Tekan Reset ~10 detik
  • Nyalakan UBNT sambil reset di tekan.
  • Pastikan lampu FLIP-FLOP
  • JANGANKAN SCRIPT
  • Jika transfer berhasil maka lampu akan menyala ke kiri dan ke kanan terus menerus.
  • Setelah Selesai ping sampai ada responds.
ping 192.168.1.20 (utk firmware UBNT)
ping 192.168.1.1  (utk firmware OpenWRT)

Coba Firmware Install

To flash an already running bullet with original firmware (AirOS) on CLI, you must do this: 

ssh root@yourbullet

url="http://downloads.openwrt.org/snapshots/trunk/ar71xx"
url="$url/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin"

wget -O /tmp/fwupdate.bin "$url"
/usr/sbin/fwupdate -m

Masalah dengan cara ini, kita tidak tahu password root :)

Referensi


Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

Misc

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Flash_UBNT_Bullet_M2&oldid=38923"