Difference between revisions of "GNURadio: Ubuntu 11.10 Install"

From OnnoWiki
Jump to navigation Jump to search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
Cara ini tampaknya tidak recommended, pada saat compile OpenBTS akan muncul.
+
Cara ini tampaknya tidak recommended jika kita menggunakan USRP1, pada saat compile [[OpenBTS]] akan muncul.
  
 
  configure: error: Package requirements (usrp > 3.1) were not met:
 
  configure: error: Package requirements (usrp > 3.1) were not met:
Line 15: Line 15:
 
Naga-naga-nya gnuradio versi terbaru tidak membuat libusrp :( ..  
 
Naga-naga-nya gnuradio versi terbaru tidak membuat libusrp :( ..  
 
kita perlu mencoba menggunakan gnuradio versi lama
 
kita perlu mencoba menggunakan gnuradio versi lama
 +
 +
 +
Ada baiknya mencoba mengcompile menggunakan GIT
 +
 +
  $ git clone git://gnuradio.org/gnuradio
 +
 +
For information about using Git, please see:
 +
http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopingWithGit
 +
 +
Coba install menggunakan cmake
 +
 +
$ mkdir $(builddir)
 +
$ cd $(builddir)
 +
$ cmake [OPTIONS] $(srcdir)
 +
$ make
 +
$ make test
 +
$ sudo make instal
 +
 +
  
  
Line 43: Line 62:
 
* GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)
 
* GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)
  
==Instal Library==
+
==Instal Aplikasi Pendukung==
  
 
Update
 
Update
Line 230: Line 249:
  
 
* [[OpenBTS]]
 
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
  
===Persiapan Hardware===
+
===Persiapan===
  
 
* [[USRP: High Precision Clock]]
 
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
  
 +
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Menggunakan UHD]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
* [[OpenBTS: Ubuntu Install]]
+
* [[GNURadio: Programming Untuk Pemula]]
* [[OpenBTS: Konfigurasi]]
+
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]]
+
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Menjalankan smqueue]]
 
* [[OpenBTS: Menjalankan smqueue]]
* [[OpenBTS: Mengoperasikan BTS]]
+
* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Operasi 1800 MHz]]
 
* [[OpenBTS: Operasi 1800 MHz]]
Line 253: Line 286:
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: SMS]]
 
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
  
 
===OpenBTS 2.8===
 
===OpenBTS 2.8===
  
* [[GNURadio: Ubuntu 11.10 Install]] '''*NOT RECOMMENED*'''
+
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] '''NOT RECOMMENDED'''
+
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Identifikasi Device]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
+
* [[OpenBTS: dari GIT ttsou]]
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
+
* [[OpenBTS: 2.8 dari SVN Install]]
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 +
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Config Test]]
 +
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
 +
===Multi OpenBTS 2.8===
 +
 +
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
  
 
===Ettus E110===
 
===Ettus E110===
  
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
* [[OpenBTS: E110 Install Image di MicroSD]]
+
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Cek Daughter Board]]
 +
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
 +
===GPRS===
 +
 +
* [[OpenBTS: GPRS]]
 +
 +
===Power Amplifier===
 +
 +
* [[Driver 900MHz]]
 +
* [[Power Amplifier 900MHz]]
 +
* [[Duplexer]]
  
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]
Line 288: Line 371:
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
  
 
===Catatan Sejarah===
 
===Catatan Sejarah===
Line 295: Line 380:
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 +
 +
===Dokumentasi Video===
 +
 +
* http://youtu.be/8ogOcUSpINU (1/6)
 +
* http://youtu.be/F5d7HGuhppk (2/6)
 +
* http://youtu.be/90Jgq6bOgrQ (3/6)
 +
* http://youtu.be/cNkx_qNqdfc (4/6)
 +
* http://youtu.be/6LCuoeI57ak (5/6)
 +
* http://youtu.be/-dEqcHoIlYk (6/6)
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 07:15, 14 August 2012

Cara ini tampaknya tidak recommended jika kita menggunakan USRP1, pada saat compile OpenBTS akan muncul.

configure: error: Package requirements (usrp > 3.1) were not met:
No package 'usrp' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables USRP_CFLAGS
and USRP_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

Di test menggunakan

pkg-config --cflags usrp

Naga-naga-nya gnuradio versi terbaru tidak membuat libusrp :( .. kita perlu mencoba menggunakan gnuradio versi lama


Ada baiknya mencoba mengcompile menggunakan GIT

 $ git clone git://gnuradio.org/gnuradio
For information about using Git, please see:
http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopingWithGit

Coba install menggunakan cmake

$ mkdir $(builddir)
$ cd $(builddir)
$ cmake [OPTIONS] $(srcdir)
$ make
$ make test
$ sudo make instal



Sumber: http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall

Sebaiknya menggunakan UBUNTU versi 10.10 kalau mau berhasil dengan mudah

Development Tool yang dibutuhkan:

  • g++
  • subversion
  • make
  • autoconf, automake, libtool
  • sdcc
  • guile
  • ccache

Library yang dibutuhkan untuk runtime dan proses compile

  • python-dev
  • FFTW 3.X (fftw3, fftw3-dev)
  • cppunit (libcppunit and libcppunit-dev)
  • Boost 1.35 (or later)
  • libusb and libusb-dev
  • wxWidgets (wx-common) and wxPython (python-wxgtk2.8)
  • python-numpy (via python-numpy-ext) (for SVN on or after 2007-May-28)
  • ALSA (alsa-base, libasound2 and libasound2-dev)
  • Qt (libqt3-mt-dev for versions earlier than 8.04; version 4 works for 8.04 and later)
  • SDL (libsdl-dev)
  • GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)

Instal Aplikasi Pendukung

Update

sudo apt-get update

Instal untuk Ubuntu 11.10

sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig \
g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
asterisk asterisk-mysql

Instalasi WxWidget

Bagian ini bisa di skip / di loncat.

Jika ingin menginstall WxWidget yang lebih baru. Tapi ini tidak fatal, kita bisa skip jika tidak terlalu membutuhkan. Jika ingin melakukan juga dapat menjalankan langkah berikut.

Edit /etc/apt/sources.list

# wxWidgets/wxPython repository at apt.wxwidgets.org
deb http://apt.wxwidgets.org/ DIST-wx main
deb-src http://apt.wxwidgets.org/ DIST-wx main  

Contoh untuk gutsy

# wxWidgets/wxPython repository at apt.wxwidgets.org
deb http://apt.wxwidgets.org/ gutsy-wx main
deb-src http://apt.wxwidgets.org/ gutsy-wx main  

Jalankan

sudo apt-get update  

Install

sudo apt-get install python-wxgtk2.8 python-wxtools wx2.8-i18n
sudo apt-get install python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev

Instal SWIG

Install secara manual SWIG

Download dari http://sourceforge.net/projects/swig/files/swig/
cp swig-2.0.4.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf swig-2.0.4.tar.gz 
cd /usr/local/src/swig-2.0.4/
./configure
make
make install

Instal QWT

Install secara manual QWT

Download dari http://sourceforge.net/projects/qwt/files/
cp qwt-6.0.1.tar.bz2 /usr/local/src/
cd /usr/local/src/
tar jxvf qwt-6.0.1.tar.bz2 
cd /usr/local/src/qwt-6.0.1/
qmake
make
make install

Install UHD

Download UHD

Download dari http://files.ettus.com/uhd_releases/003_003_002/

Install UHD

dpkg -i UHD-003.003.002-Ubuntu-11.10-i686.deb

Handling USRP

Ubuntu menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke USRP. Script berikut akan memberikan akses bagi user untuk menghandel USRP via USB baik secara live atau hot-plug.

sudo addgroup usrp
sudo usermod -G usrp -a <YOUR_USERNAME>
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
sudo chown root.root tmpfile
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules

Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi USRP di USB tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot komputer.

sudo udevadm control --reload-rules

atau

sudo /etc/init.d/udev stop
sudo /etc/init.d/udev start

atau

sudo killall -HUP udevd

Kita dapat mencek jika USRP telah di kenali dengan mengamati /dev/bus/usb setelah USRP di pasang menggunakan perintah

ls -lR /dev/bus/usb | grep usrp

Harusnya akan keluar seperti

crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002


Setiap USRP yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.

Install GNURadio

Sebaiknya pada saat melakukan instalasi GNURadio, kita pasang USRP ke USB port-nya.

Download build-gnuradio

http://www.sbrac.org/files/build-gnuradio

Pastikan

  • Masih ada sisa harddisk 500+ Gbyte.
  • anda memiliki sambungan ke Internet yang baik
  • tidak ada yang menggunakan sambungan Internet tersebut.

Karena script ini akan mendownload gnuradio menggunakan GIT.

Kita akan butuh waktu sekitar 2 jam untuk membuat gnuradio, sebagai super user lakukan

sudo su
mkdir /usr/local/src/gnuradio
cp build-gnuradio /usr/local/src/gnuradio
cd /usr/local/src/gnuradio
chmod a+x build-gnuradio
chmod -Rf 777 /usr/local/src/gnuradio/
chown -Rf <username>.<username> /usr/local/src/gnuradio/
exit
sudo su
exit
sudo su
exit
cd /usr/local/src/gnuradio
./build-gnuradio
Proceed? <y>
Do you have SUDO privileges? <y>

Terakhir biasanya akan keluar warning berikut

************************************************************
You should probably set your PYTHONPATH to:
 
     /usr/local/lib/python2.7/dist-packages
 
in your .bashrc or equivalent file prior to attempting to run
any Gnu Radio applications or Gnu Radio Companion.

Lakukan

vi ~/.bashrc

Tambahkan

PYTHONPATH=/usr/local/lib/python2.7/dist-packages
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Untuk memastikan ada baiknya lakukan

sudo ldconfig
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

Ettus E110

GPRS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video