Difference between revisions of "OpenWRT: Setup OLSR di UBNT via CLI"

From OnnoWiki
Jump to navigation Jump to search
Line 189: Line 189:
 
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 
* [[OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI]]
 
* [[UBNT]]
 
* [[UBNT]]
−
 
−
 
−
 
−
{
 
−
    Mode "mesh"
 
−
}
 

Revision as of 14:38, 11 April 2013

Reset Password Root

Reset password root melalui telnet ke 192.168.1.1 

telnet 192.168.1.1

Tampilan 

Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------


BusyBox v1.19.4 (2013-04-10 18:38:45 WIT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r36235)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------

root@OpenWrt:/# passwd
Changing password for root
New password:
Retype password:
Password for root changed by root

Konfigurasi Wireless

Konfigurasi wireless dan mengaktifkan sebagai adhoc pada channel 1. 

vi /etc/config/wireless

Isinya kira-kira 

config wifi-device  radio0
        option type     mac80211
        option channel  1
        option hwmode   11g
        txpower         15
        option path     'platform/ar231x-wmac.0'

        # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 0

config wifi-iface
        option device   radio0
        option network  mesh
        option mode     adhoc
        option ssid     MESH
        option encryption none
        option bssid    02:CA:FF:EE:BA:BE


Konfigurasi IP address MESH

Set IP statik melalui perintah 

vi /etc/config/network

Isi kira-kira 

config interface loopback
        option ifname   lo
        option proto    static
        option ipaddr   127.0.0.1
        option netmask  255.0.0.0 

config interface lan
        option ifname   eth0
        option type     bridge
        option proto    static
        option ipaddr   192.168.1.1
        option netmask  255.255.255.0

config interface mesh
        option ifname   wlan0
        option type     bridge
        option proto    static
        option ipaddr   10.123.123.223 (SETIAP NODE HARUS menggunakan IP yang BEDA!!)
        option netmask  255.255.255.0

Set agar OLSR start waktu booting

Edit rc.local 

vi /etc/rc.local

Isi 

ifconfig wlan0 10.123.123.223 netmask 255.0.0.0
/etc/init.d/telnet stop
/etc/init.d/olsrd stop
olsrd -f /etc/olsrd.conf &

exit 0

Buat file /etc/olsrd.conf

Edit 

vi /etc/olsrd.conf

Isi dengan 

Hna4
{
}

Hna6
{
}

LoadPlugin "olsrd_nameservice.so.0.3"
{
}

LoadPlugin "olsrd_txtinfo.so.0.1"
{
   PlParam "accept" "0.0.0.0"
}

InterfaceDefaults
{
}

Interface "wlan0"
{
    Mode "mesh"
}



Pranala Menarik

Build Firmware

Flash Firmware

Misc

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Setup_OLSR_di_UBNT_via_CLI&oldid=36621"