Difference between revisions of "GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0"

From OnnoWiki
Jump to navigation Jump to search
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Sumber: http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall
 
Sumber: http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall
−
 
−
'''Sebaiknya menggunakan UBUNTU versi 10.10 kalau mau berhasil dengan mudah'''
 
  
 
Development Tool yang dibutuhkan:
 
Development Tool yang dibutuhkan:
Line 157: Line 155:
 
  tar zxvf gnuradio-3.3.0.tar.gz  
 
  tar zxvf gnuradio-3.3.0.tar.gz  
 
  cd /usr/local/src/gnuradio-3.3.0/
 
  cd /usr/local/src/gnuradio-3.3.0/
−
  ./configure
+
  ./configure --disable-usrp2 --enable-usrp
 
  make clean
 
  make clean
 
  make all
 
  make all
Line 164: Line 162:
 
  make install
 
  make install
 
  sudo ldconfig
 
  sudo ldconfig
 +
 +
 +
===Error PYTHONPATH===
  
 
Jika saat menjalankan aplikasi [[gnuradio]] ada error seperti
 
Jika saat menjalankan aplikasi [[gnuradio]] ada error seperti
Line 173: Line 174:
 
  sudo ldconfig
 
  sudo ldconfig
  
−
Masukan PHYTHONPATH dengan cara mengedit
+
Masukan PYTHONPATH dengan cara mengedit
  
 
  vi ~/.bashrc
 
  vi ~/.bashrc
Line 185: Line 186:
  
 
  sudo ldconfig
 
  sudo ldconfig
 +
export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
 
  export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
 
  export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
 +
 +
===Error USRP2===
 +
 +
Di Ubuntu 11.10 tampaknya dukungan Gnuradio untuk USRP2 bermasalah tidak bisa di compile dengan baik. Disable USRP2 saat configure
 +
 +
  ./configure --disable-usrp2 --enable-usrp
  
 
==Referensi==
 
==Referensi==
Line 198: Line 206:
 
* [[OpenBTS]]
 
* [[OpenBTS]]
  
−
===Persiapan Hardware===
+
===Persiapan===
  
 
* [[USRP: High Precision Clock]]
 
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
  
 +
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''*RECOMMENDED*'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''*RECOMMENDED*'''
 +
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 +
* [[GNURadio: Programming Untuk Pemula]]
 
* [[OpenBTS: Ubuntu Install]]
 
* [[OpenBTS: Ubuntu Install]]
 +
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]]
 
* [[OpenBTS: Konfigurasi]]
 
* [[OpenBTS: Konfigurasi]]
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
Line 220: Line 238:
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: SMS]]
 
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
  
 
===OpenBTS 2.8===
 
===OpenBTS 2.8===
  
−
* [[GNURadio: Ubuntu 11.10 Install]]
+
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
 +
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]]
 +
* [[GNURadio: UHD Image]]
 +
* [[GNURadio: UHD Identifikasi Device]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
−
* [[OpenBTS: 2.8 dari SVN Install]]
+
* [[OpenBTS: dari GIT ttsou]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
 +
* [[OpenBTS: 2.8 Konfigurasi]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
  
Line 233: Line 266:
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Install Image di MicroSD]]
 
* [[OpenBTS: E110 Install Image di MicroSD]]
 +
* [[OpenBTS: E110 Cek Daughter Board]]
 +
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Install UHD Image]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
  
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]
Line 253: Line 295:
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
  
 
===Catatan Sejarah===
 
===Catatan Sejarah===

Latest revision as of 14:22, 26 April 2012

Sumber: http://gnuradio.org/redmine/wiki/gnuradio/UbuntuInstall

Development Tool yang dibutuhkan:

  • g++
  • subversion
  • make
  • autoconf, automake, libtool
  • sdcc
  • guile
  • ccache

Library yang dibutuhkan untuk runtime dan proses compile

  • python-dev
  • FFTW 3.X (fftw3, fftw3-dev)
  • cppunit (libcppunit and libcppunit-dev)
  • Boost 1.35 (or later)
  • libusb and libusb-dev
  • wxWidgets (wx-common) and wxPython (python-wxgtk2.8)
  • python-numpy (via python-numpy-ext) (for SVN on or after 2007-May-28)
  • ALSA (alsa-base, libasound2 and libasound2-dev)
  • Qt (libqt3-mt-dev for versions earlier than 8.04; version 4 works for 8.04 and later)
  • SDL (libsdl-dev)
  • GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)

Instal Library

Update 

sudo apt-get update

Instal untuk Ubuntu 11.10 

sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig \
g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
asterisk asterisk-mysql

Instalasi WxWidget

Bagian ini bisa di skip / di loncat.

Jika ingin menginstall WxWidget yang lebih baru. Tapi ini tidak fatal, kita bisa skip jika tidak terlalu membutuhkan. Jika ingin melakukan juga dapat menjalankan langkah berikut.

Edit /etc/apt/sources.list 

# wxWidgets/wxPython repository at apt.wxwidgets.org
deb http://apt.wxwidgets.org/ DIST-wx main
deb-src http://apt.wxwidgets.org/ DIST-wx main

Contoh untuk gutsy 

# wxWidgets/wxPython repository at apt.wxwidgets.org
deb http://apt.wxwidgets.org/ gutsy-wx main
deb-src http://apt.wxwidgets.org/ gutsy-wx main

Jalankan 

sudo apt-get update

Install 

sudo apt-get install python-wxgtk2.8 python-wxtools wx2.8-i18n
sudo apt-get install python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev

Instal SWIG

Install secara manual SWIG 

Download dari http://sourceforge.net/projects/swig/files/swig/
cp swig-2.0.4.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf swig-2.0.4.tar.gz 
cd /usr/local/src/swig-2.0.4/
./configure
make
make install

Instal QWT

Install secara manual QWT 

Download dari http://sourceforge.net/projects/qwt/files/
cp qwt-6.0.1.tar.bz2 /usr/local/src/
cd /usr/local/src/
tar jxvf qwt-6.0.1.tar.bz2 
cd /usr/local/src/qwt-6.0.1/
qmake
make
make install

Install UHD

Download UHD 

Download dari http://files.ettus.com/uhd_releases/003_003_002/

Install UHD 

dpkg -i UHD-003.003.002-Ubuntu-11.10-i686.deb

Handling USRP

Ubuntu menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke USRP. Script berikut akan memberikan akses bagi user untuk menghandel USRP via USB baik secara live atau hot-plug. 

sudo addgroup usrp
sudo usermod -G usrp -a <YOUR_USERNAME>
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
sudo chown root.root tmpfile
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules

Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi USRP di USB tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot komputer. 

sudo udevadm control --reload-rules

atau 

sudo /etc/init.d/udev stop
sudo /etc/init.d/udev start

atau 

sudo killall -HUP udevd

Kita dapat mencek jika USRP telah di kenali dengan mengamati /dev/bus/usb setelah USRP di pasang menggunakan perintah 

ls -lR /dev/bus/usb | grep usrp

Harusnya akan keluar seperti 

crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002


Setiap USRP yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.

Install GNURadio

Sebaiknya pada saat melakukan instalasi GNURadio, kita pasang USRP ke USB port-nya.

Download aplikasi GNURadio dari 

http://gnuradio.org/redmine/wiki/gnuradio/Download

Install GNURadio 

cp gnuradio-3.3.0.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf gnuradio-3.3.0.tar.gz 
cd /usr/local/src/gnuradio-3.3.0/
./configure --disable-usrp2 --enable-usrp
make clean
make all
make
make check
make install
sudo ldconfig


Error PYTHONPATH

Jika saat menjalankan aplikasi gnuradio ada error seperti 

ImportError: libgnuradio-core-3.3.0.so.0: cannot open shared object file: No such file or directory

Lakukan / ketik 

sudo ldconfig

Masukan PYTHONPATH dengan cara mengedit 

vi ~/.bashrc

Tambahkan 

PYTHONPATH=/usr/local/lib/python2.7/dist-packages
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Untuk memastikan ada baiknya lakukan 

sudo ldconfig
export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Error USRP2

Di Ubuntu 11.10 tampaknya dukungan Gnuradio untuk USRP2 bermasalah tidak bisa di compile dengan baik. Disable USRP2 saat configure 

 ./configure --disable-usrp2 --enable-usrp

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Ettus E110

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=GNURadio:_Ubuntu_11.10_Instal_GNURadio_3.3.0&oldid=31891"