TCP/IP: Quagga Apakah Itu?
Quagga adalah software routing open source berbasis pada router Zebra, yang proses pengembangannya telah berhenti di tahun 2003. Quagga mendukung protokol routing standard seperti RIP, OSPF atau BGP dan dapat di instalasi di semua sistem Linux dengan kernel 2.4 atau yang lebih tinggi.
Quagga terdiri atas beberapa daemin, satu daemon per protokol routing dan sebuah daemon bernama Zebra yang berfungsi sebagai kernel routing manajer. Setiap daemon mempunyai file konfigurasi sendiri dan interface terminal yang dapat di akses menggunakan telnet.
The vtysh tool is provided to configure the Quagga router from the localhost, in a unique interface. See the Quagga tutorial for instructions on configuring the router.
Quagga works independently from the operational system (OS) over which it is installed. This is not the case for the open source Vyatta router or the commercial routers where the OS and the routing engine are built together. With Vyatta routers, you can access the operational system (a modified version of the Debian Linux distribution) but even this is not necessary to configure the router. With commercial routers like Cisco or Nortel, you can access only the router interface.
It must be emphasised that Quagga owns only routing capabililies and functionalities associated with it, such as access lists or route maps. It does not provide "non-routing" functionalities such as DHCP server, NTP server/client or ssh access but it is often possible to enable them on the operating system supporting your Quagga router. See the Routers' comparison to get an overview about the functionalities available with Cisco, Vyatty or Quagga routers.
quagga animal The Quagga Command line Interface is very similar to the Cisco IOS software allows it to be configured very easily for those who are familiar with Cisco.
And finally, little story: the word 'quagga' comes from an extinct animal which was a subspecies of the plains zebra.