TCP/IP: Quagga Statik Routing

From OnnoWiki
Jump to navigation Jump to search

quagga cisco 2651 3750 static routing Functionalities tested:

Interface settings Static routes Telnet access




Konfigurasi

Kita perlu menset sistem Linux secara benar agar Quagga dapat berjalan dengan baik.


Konfigurasi Linux

Cek bahwa daemon zebra dapat di aktifkan:

vim /etc/quagga/daemons

isinya

zebra=yes
bgpd=no
ospfd=no
ospf6d=no
ripd=no
ripngd=no
isisd=no

Jika kita mengubah file daemons, kita perlu me-restart layanan Quagga menggunakan perintah:

vim /etc/init.d/quagga restart
Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd).
Removing all routes made by zebra.
Nothing to flush.
Loading capability module if not yet done.
Starting Quagga daemons (prio:10): zebra.

Kita dapat menset hostname Quagga_A di file /etc/quagga/vtysh.conf:

vim /etc/quagga/vtysh.conf
!
! Sample
!
! service integrated-vtysh-config
hostname Quagga_A
username root nopassword
!

Di komputer yang lain, kita dapat menset hostname Quagga_B di file /etc/quagga/vtysh.conf

vim /etc/quagga/vtysh.conf
!
! Sample
!
! service integrated-vtysh-config
hostname Quagga_B
username root nopassword
!

Jangan lupa untuk mengaktifkan ip forwarding di router Quagga A It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface.

ROUTERS CONFIGURATIONS

CISCO ROUTER 2651 IOS: 12.2-23a 	QUAGGA ROUTER A 0.99.6
interface FastEthernet0/1
  ip address 10.1.3.2 255.255.255.0
  no shutdown 	interface eth0
  ip address 10.1.3.1/24
  link-detect
interface FastEthernet0/0
  ip address 10.1.4.2 255.255.255.0
  no shutdown 	interface eth1
  ip address 10.1.1.1/24
  link-detect
hostname Cisco-2651 	
ip route 10.1.0.0 255.255.0.0 10.1.3.1
ip route 10.200.1.4 255.255.255.255 10.1.4.1
ip route 10.200.1.1 255.255.255.255 10.1.3.1
	ip route 10.1.0.0/16 10.1.3.2
ip route 10.200.1.4/32 10.1.3.2
ip route 10.200.1.1/32 10.1.1.2
line vty 0 4
 no login

line vty

 no login
enable secret password 	enable password password
CISCO SWITCH L3 3750 IOS: 12.2-25.SEE2 	
QUAGGA ROUTER B 0.99.6
interface vlan 1
  ip address 10.1.1.2 255.255.255.0
  no shutdown 	interface eth0
  ip address 10.1.4.1/24
  link-detect
interface Loopback 1
  ip address 10.200.1.1 255.255.255.255
  	interface lo
  ip address 10.200.1.4/32
  link-detect
hostname 3750_L3 	hostname quagga-router-b
ip route 0.0.0.0 0.0.0.0 10.1.1.1 	ip route 0.0.0.0/0 10.1.4.2
line vty 0 4
  no login 
	line vty 0 4
  no login
enable secret password
  	enable password password

ip routing
ip multicast-routing distributed