Difference between revisions of "OpenWRT: Build Firmware Linksys E1700"

From OnnoWiki
Jump to navigation Jump to search
 
(18 intermediate revisions by the same user not shown)
Line 20: Line 20:
  
 
  cd /usr/local/src
 
  cd /usr/local/src
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.43.tar.gz
+
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
  tar zxvf XML-Parser-2.43.tar.gz
+
  tar zxvf XML-Parser-2.44.tar.gz
  cd /usr/local/src/XML-Parser-2.43
+
  cd /usr/local/src/XML-Parser-2.44
 
  perl Makefile.PL
 
  perl Makefile.PL
 
  make install
 
  make install
 
  
 
==Compile Menggunakan Development Trunk==
 
==Compile Menggunakan Development Trunk==
Line 49: Line 48:
 
  ./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
 
  ./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11 coova-chilli
+
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
 +
./scripts/feeds install quagga coova-chilli
 
  ./scripts/feeds update -a
 
  ./scripts/feeds update -a
 
  ./scripts/feeds install -a
 
  ./scripts/feeds install -a
Line 55: Line 55:
 
  make defconfig
 
  make defconfig
 
  make menuconfig
 
  make menuconfig
  make world
+
  make clean && make -j8 world &
 +
 
  
 
Hasilnya akan berada di folder
 
Hasilnya akan berada di folder
Line 76: Line 77:
 
* Samba (supaya keren)
 
* Samba (supaya keren)
 
* UPnP (supaya keren)
 
* UPnP (supaya keren)
 +
* Freifunk '''_JANGAN_''' di install karena membuat masalah di Linksys E1700.
  
 
  Administration  --->  
 
  Administration  --->  
 
       <*> asterisk11-gui
 
       <*> asterisk11-gui
 +
      <*> asterisk18-gui
 
  Kernel modules  --->
 
  Kernel modules  --->
       -*- kmod-ipv6
+
       Network Support  --->
      -*- kmod-sched
+
            -*- kmod-ipv6
      -*- kmod-sched-core
+
            -*- kmod-ppp
 +
            -*-  kmod-pppoe
 +
            -*-  kmod-pppox
 +
            -*- kmod-sched
 +
            -*- kmod-sched-core
 +
      Wireless Drivers  --->
 +
            -*- kmod-cfg80211
 +
            -*- kmod-mac80211
 +
            <*> kmod-rt2800-pci
 +
            <*> kmod-rt2800-soc
 +
            -*- kmod-rt2x00-lib
 
  LuCI  --->
 
  LuCI  --->
 
       1. Collections
 
       1. Collections
 
               -*- luci
 
               -*- luci
 
               <*> luci-ssl
 
               <*> luci-ssl
 +
      2. Modules  --->
 +
              -*- luci-base
 +
              -*- luci-mod-admin-full
 +
              <*> luci-mod-failsafe
 +
              <*> luci-mod-rpc
 
       3. Applications
 
       3. Applications
 
               <*> luci-app-ahcp
 
               <*> luci-app-ahcp
 +
              <*> luci-app-asterisk
 
               -*- luci-app-firewall
 
               -*- luci-app-firewall
 +
              <*> luci-app-multiwan
 +
              <*> luci-app-pbx
 
               <*> luci-app-radvd
 
               <*> luci-app-radvd
 
               <*> luci-app-samba
 
               <*> luci-app-samba
Line 96: Line 117:
 
       4. Themes
 
       4. Themes
 
               -*- luci-theme-bootstrap
 
               -*- luci-theme-bootstrap
              <*> luci-theme-freifunk-bno
 
              <*> luci-theme-freifunk-generic
 
 
               <*> luci-theme-openwrt
 
               <*> luci-theme-openwrt
 
       5. Protocols
 
       5. Protocols
Line 105: Line 124:
 
       Telephony  --->
 
       Telephony  --->
 
               -*- asterisk11
 
               -*- asterisk11
 +
              -*- asterisk18
 +
              <*> sipp
 +
              <*> sipsak
 +
      -*- ahcpd
 
       -*- hostapd-common
 
       -*- hostapd-common
 
       -*- iw
 
       -*- iw
Line 131: Line 154:
  
 
  cd ~
 
  cd ~
  cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/
+
  cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/
  
 
  cd ~
 
  cd ~
  cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/
+
  cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/
  
 
Hati-hati folder
 
Hati-hati folder
Line 140: Line 163:
 
  /linux-ramips_mt7620/linux-3.14.26
 
  /linux-ramips_mt7620/linux-3.14.26
 
  /linux-ramips_mt7620/linux-3.14.27  
 
  /linux-ramips_mt7620/linux-3.14.27  
  /linux-ramips_mt7620/linux-3.14.28
+
  /linux-ramips_mt7620/linux-3.14.32
 +
/linux-ramips_mt7620/linux-3.18.7
  
 
mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.
 
mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.
Line 151: Line 175:
 
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD
 
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD
  
  vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/Kconfig  
+
  vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Kconfig  
  
 
  source "drivers/mtd/ralink/Kconfig"
 
  source "drivers/mtd/ralink/Kconfig"
Line 159: Line 183:
 
Tambahkan kalimat berikut di akhir file makefile:
 
Tambahkan kalimat berikut di akhir file makefile:
  
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/Makefile
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Makefile
  
 
  obj-$(CONFIG_MTD_RALINK)    += ralink/
 
  obj-$(CONFIG_MTD_RALINK)    += ralink/
Line 165: Line 189:
 
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN
 
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN
  
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/Kconfig  
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Kconfig  
  
 
  source "drivers/net/wireless/rt2860v2_ap/Kconfig"
 
  source "drivers/net/wireless/rt2860v2_ap/Kconfig"
Line 172: Line 196:
 
Tambahkan kalimat berikut di akhir file makefile:
 
Tambahkan kalimat berikut di akhir file makefile:
  
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/Makefile  
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Makefile  
  
 
  obj-$(CONFIG_RT2860V2_AP)  += rt2860v2_ap/
 
  obj-$(CONFIG_RT2860V2_AP)  += rt2860v2_ap/
Line 226: Line 250:
  
 
===Buat lagi firmware===
 
===Buat lagi firmware===
 +
 +
Ulangi lagi pembuatan firmware. Tapi
 +
 +
'''JANGAN LAKUKAN make clean'''
  
 
  cd ~/openwrt.trunk/trunk/
 
  cd ~/openwrt.trunk/trunk/
Line 243: Line 271:
 
==Flash Linksys E1700==
 
==Flash Linksys E1700==
  
Flash image yang di hasilkan ke router.
+
Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,
 +
 
 +
* Masuk ke web
 +
* Masuk ke menu system
 +
* Masuk ke menu firmware upgrade
 +
* Pilih file .bin berikut
 +
 
 +
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
 +
 
 +
* Flash, jangan sampai listrik mati & sambungan LAN putus.
 +
 
 +
 
 
Device ra0 akan muncul
 
Device ra0 akan muncul
  
 
  ifconfig ra0
 
  ifconfig ra0
 +
atau
 +
ifconfig wlan0
  
 
Kita tidak bisa mengkonfigurasi
 
Kita tidak bisa mengkonfigurasi
  
 
  ifconfig ra0 up.
 
  ifconfig ra0 up.
 +
atau
 +
ifconfig wlan0 up
  
Karena kita ridak memiliki file
+
Karena kita tidak memiliki file
  
 
  /etc/Wireless/RT2860/RT2860.dat
 
  /etc/Wireless/RT2860/RT2860.dat
Line 258: Line 301:
 
Atau symbol link ke /tmp/RT2860.dat.
 
Atau symbol link ke /tmp/RT2860.dat.
  
File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel.
+
File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file
 +
 
 +
RT2860.dat
 +
 
 +
Masukan di
 +
 
 +
/etc/Wireless/RT2860/RT2860.dat
 +
/tmp/RT2860.dat
 +
 
 +
Agar operasional Linksys E1700 menjadi stabil.
  
 +
==Cara Membuat / Mengambil file RT2860.dat==
  
 +
Cara paling gampang.
 +
Download yang sudah jadi
  
==Cara Membuat file RT2860.dat==
+
wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat
  
 +
Cara yang lebih susah.
 
Ambil file rt2860v2.sh dari
 
Ambil file rt2860v2.sh dari
  
 
  https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh
 
  https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh
  
I fixed the wrong default mac address problem via shell command in this script file, you know, it's not the best, but works well.
+
Untuk MAC address WLAN bisa di set menggunakan file
 +
 
 +
/etc/config/wireless
 +
 
 +
dengan parameter
 +
 
 +
macaddr '1a:1a:1a:1a:1a:1a'
 +
 
 +
atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah
 +
 
 +
hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'
 +
 
 +
Masukan hasil-nya ke parameter di  RT2860.dat
  
Your can define your perefered mac addres in /etc/config/wireless file with option macaddr '1a:1a:1a:1a:1a:1a';
+
MacAddress=
  
Or you can read out the factory default mac address in eeprom, using this shell:
+
Setelah kita mempunyai file
  
hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'
+
RT2860.dat
  
substitute and eval this shell in the appropriate place in rt2860v2.sh file. you can get everything automatically.
+
Masukan di
Where is the best and perfect firmware?
 
I will not to Share out any more.
 
Dive into the code and fix it by yourself, it's so easy.
 
  
 +
mkdir -p /etc/wireless/RT2860
 +
mkdir -p /etc/Wireless/RT2860
 +
cp RT2860.dat /etc/Wireless/RT2860/RT2860.dat
 +
cp RT2860.dat /etc/wireless/RT2860/RT2860.dat
 +
cp RT2860.dat /tmp/RT2860.dat
  
Then, you can download and burn the new firmware to the mt7620 SOC Board via TFTP in the uboot stage.
+
Agar operasional Linksys E1700 menjadi stabil.
  
 
==Lebih Lanjut==
 
==Lebih Lanjut==
  
 
* file [[rt2860v2.sh]]
 
* file [[rt2860v2.sh]]
 +
* [[Linksys E1700: Isi file RT2860.dat]]
  
 
==Referensi==
 
==Referensi==

Latest revision as of 08:41, 18 July 2015

Spesifikasi

Model : E1700
Platform : Mediatek MT7620A
RAM [MB] : 32
Flash [MB] : 8
Ant. Conn. Type : External
WLAN NIC : SOC
WLAN standard [802.11] : b/g/n 2x2:2
Eth. port count : 4 Gb LAN 1 Gb WAN
Power Input [V/A] 12V 0.5A

Siapkan Aplikasi Pendukung

sudo su
apt-get update
apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \
fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \
libexpat1 libexpat1-dev libssl-dev libdaemon*
cd /usr/local/src
wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
tar zxvf XML-Parser-2.44.tar.gz
cd /usr/local/src/XML-Parser-2.44
perl Makefile.PL
make install

Compile Menggunakan Development Trunk

Development Trunk tampaknya paling RECOMMENDED

Lakukan sebagai user biasa

svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
cd ~/openwrt.trunk/trunk/
./scripts/feeds update
./scripts/feeds install meshwizard openssh-server openssh-client
./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate
./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services
./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk
./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw
./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw
./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo
./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf
./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna
./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
./scripts/feeds install quagga coova-chilli
./scripts/feeds update -a
./scripts/feeds install -a
make clean
make defconfig
make menuconfig
make clean && make -j8 world &


Hasilnya akan berada di folder

~/openwrt.trunk/trunk/bin/ramips/

Konfigurasi Default

Konfigurasi untuk E1700

Target System (Ralink RT288x/RT3xxx) --->
Subtarget (MT7620 based boards) --->
Target Profile (Linksys E1700) --->

Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita dapat menambahkan paling tidak

  • Luci
  • Asterisk (supaya keren)
  • Samba (supaya keren)
  • UPnP (supaya keren)
  • Freifunk _JANGAN_ di install karena membuat masalah di Linksys E1700.
Administration  ---> 
      <*> asterisk11-gui
      <*> asterisk18-gui
Kernel modules  --->
      Network Support  --->
            -*- kmod-ipv6
            -*- kmod-ppp
            -*-   kmod-pppoe
            -*-   kmod-pppox
            -*- kmod-sched
            -*- kmod-sched-core
      Wireless Drivers  --->
            -*- kmod-cfg80211
            -*- kmod-mac80211
            <*> kmod-rt2800-pci
            <*> kmod-rt2800-soc
            -*- kmod-rt2x00-lib
LuCI  --->
      1. Collections
             -*- luci
             <*> luci-ssl
      2. Modules  --->
             -*- luci-base
             -*- luci-mod-admin-full
             <*> luci-mod-failsafe
             <*> luci-mod-rpc
      3. Applications
             <*> luci-app-ahcp
             <*> luci-app-asterisk
             -*- luci-app-firewall
             <*> luci-app-multiwan
             <*> luci-app-pbx
             <*> luci-app-radvd
             <*> luci-app-samba
             <*> luci-app-upnp
             <*> luci-app-wshaper
      4. Themes
             -*- luci-theme-bootstrap
             <*> luci-theme-openwrt
      5. Protocols
             <*> luci-proto-ipv6
             -*- luci-proto-ppp
Network  --->
      Telephony  --->
             -*- asterisk11
             -*- asterisk18
             <*> sipp
             <*> sipsak
      -*- ahcpd
      -*- hostapd-common
      -*- iw
      -*- samba36-server
      <*> wpad-mini
      -*- wshaper

Setelah selesai, kita perlu compile

cd ~/openwrt.trunk/trunk
make clean
make defconfig
make world

Setelah jadi, kita perlu menambahkan driver wifi dan compile ulang secara manual berikut ini.

Cara Menambahkan Driver Wifi

Download patch

cd ~
rm -Rf ~/rt2860v2-for-openwrt-mt7620/
git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git

Merge ke build directory

cd ~
cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/
cd ~
cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/

Hati-hati folder

/linux-ramips_mt7620/linux-3.14.26
/linux-ramips_mt7620/linux-3.14.27 
/linux-ramips_mt7620/linux-3.14.32
/linux-ramips_mt7620/linux-3.18.7

mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.


Tambahkan di Kconfig dan Makefile

Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD

vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Kconfig 
source "drivers/mtd/ralink/Kconfig"
endif # MTD


Tambahkan kalimat berikut di akhir file makefile:

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Makefile
obj-$(CONFIG_MTD_RALINK)    += ralink/

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Kconfig 
source "drivers/net/wireless/rt2860v2_ap/Kconfig"
endif # WLAN                      

Tambahkan kalimat berikut di akhir file makefile:

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Makefile 
obj-$(CONFIG_RT2860V2_AP)   += rt2860v2_ap/

Tambahkan konfigurasi

Jalankan

cd ~/openwrt.trunk/trunk
make kernel_menuconfig

Masukan konfigurasi berikut

Machine selection  --->  
     System type (Ralink based machines)  --->
     Ralink SoC selection (MT7620/8)  --->
     Devicetree selection (None)  --->

Device Driver -->
      <*> Memory Technology Device (MTD) support  --->
             Ralink Flash Type support  --->
                   [*] Ralink MTD support  

Device Driver -->
      [*] Network device support  --->
             [*]   Wireless LAN  ---> 
                     <*>   Ralink RT2860 802.11n AP support
                     [*]     LED Support
                     [ ]     WSC (WiFi Simple Config)
                     [*]     LLTD (Link Layer Topology Discovery Protocol)
                     [*]     WDS
                     [*]     MBSSID
                     [*]       New MBSSID MODE
                     [*]     AP-CLient Support
                     [*]       MAC Repeater Support
                     [ ]     IGMP snooping (NEW)
                     [ ]     NETIF Block (NEW)
                     [ ]     DFS (NEW)
                     [*]     Carrier Detect
                     [ ]     DLS ((Direct-Link Setup) Support (NEW)
                     [ ]     IDS (Intrusion Detection System) Support (NEW)
                     [*]     CoC Support (NEW)
                     [ ]     Memory Optimization (NEW)
                     [ ]     Video Turbine support (NEW)
                     [ ]     802.11n Draft3 (NEW)
                     [ ]     Adjust Power Consumption Support (NEW
                     [ ]     Single SKU (NEW)
                     Choose Power Design (Internal PA and Internal LNA)  --->
                     [ ]   TSSI Compensation (NEW)
                     [ ]   Temperature Compensation (NEW)

Pastikan pilih (*) untuk membuat driver masuk ke kernel, bukan kernel module.

Buat lagi firmware

Ulangi lagi pembuatan firmware. Tapi

JANGAN LAKUKAN make clean

cd ~/openwrt.trunk/trunk/
make world

Hasilnya ada di folder

~/openwrt.trunk/trunk/bin/ramips
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
openwrt-ramips-mt7620-e1700-squashfs-sysupgrade.bin
openwrt-ramips-mt7620-root.squashfs
openwrt-ramips-mt7620-uImage.bin
openwrt-ramips-mt7620-vmlinux.bin
openwrt-ramips-mt7620-vmlinux.elf

Flash Linksys E1700

Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,

  • Masuk ke web
  • Masuk ke menu system
  • Masuk ke menu firmware upgrade
  • Pilih file .bin berikut
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
  • Flash, jangan sampai listrik mati & sambungan LAN putus.


Device ra0 akan muncul

ifconfig ra0

atau

ifconfig wlan0

Kita tidak bisa mengkonfigurasi

ifconfig ra0 up.

atau

ifconfig wlan0 up

Karena kita tidak memiliki file

/etc/Wireless/RT2860/RT2860.dat

Atau symbol link ke /tmp/RT2860.dat.

File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file

RT2860.dat

Masukan di

/etc/Wireless/RT2860/RT2860.dat
/tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Cara Membuat / Mengambil file RT2860.dat

Cara paling gampang. Download yang sudah jadi

wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat

Cara yang lebih susah. Ambil file rt2860v2.sh dari

https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh

Untuk MAC address WLAN bisa di set menggunakan file

/etc/config/wireless

dengan parameter

macaddr '1a:1a:1a:1a:1a:1a'

atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah

hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'

Masukan hasil-nya ke parameter di RT2860.dat

MacAddress=

Setelah kita mempunyai file

RT2860.dat

Masukan di

mkdir -p /etc/wireless/RT2860
mkdir -p /etc/Wireless/RT2860
cp RT2860.dat /etc/Wireless/RT2860/RT2860.dat
cp RT2860.dat /etc/wireless/RT2860/RT2860.dat
cp RT2860.dat /tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Lebih Lanjut

Referensi