OpenWRT: Build Firmware Linksys E1700

From OnnoWiki
Jump to navigation Jump to search

Spesifikasi

Model : E1700
Platform : Mediatek MT7620A
RAM [MB] : 32
Flash [MB] : 8
Ant. Conn. Type : External
WLAN NIC : SOC
WLAN standard [802.11] : b/g/n 2x2:2
Eth. port count : 4 Gb LAN 1 Gb WAN
Power Input [V/A] 12V 0.5A

Siapkan Aplikasi Pendukung

sudo su
apt-get update
apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \
fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \
libexpat1 libexpat1-dev libssl-dev libdaemon*

cd /usr/local/src
wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
tar zxvf XML-Parser-2.44.tar.gz
cd /usr/local/src/XML-Parser-2.44
perl Makefile.PL
make install

Compile Menggunakan Development Trunk

Development Trunk tampaknya paling RECOMMENDED

Lakukan sebagai user biasa 

svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
cd ~/openwrt.trunk/trunk/
./scripts/feeds update
./scripts/feeds install meshwizard openssh-server openssh-client
./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate
./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services
./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk
./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw
./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw
./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo
./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf
./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna
./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
./scripts/feeds install quagga coova-chilli
./scripts/feeds update -a
./scripts/feeds install -a
make clean
make defconfig
make menuconfig
make clean && make -j8 world &


Hasilnya akan berada di folder 

~/openwrt.trunk/trunk/bin/ramips/

Konfigurasi Default

Konfigurasi untuk E1700 

Target System (Ralink RT288x/RT3xxx) --->
Subtarget (MT7620 based boards) --->
Target Profile (Linksys E1700) --->

Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita dapat menambahkan paling tidak

  • Luci
  • Asterisk (supaya keren)
  • Samba (supaya keren)
  • UPnP (supaya keren)
  • Freifunk _JANGAN_ di install karena membuat masalah di Linksys E1700.
Administration  ---> 
      <*> asterisk11-gui
      <*> asterisk18-gui
Kernel modules  --->
      Network Support  --->
            -*- kmod-ipv6
            -*- kmod-ppp
            -*-   kmod-pppoe
            -*-   kmod-pppox
            -*- kmod-sched
            -*- kmod-sched-core
      Wireless Drivers  --->
            -*- kmod-cfg80211
            -*- kmod-mac80211
            <*> kmod-rt2800-pci
            <*> kmod-rt2800-soc
            -*- kmod-rt2x00-lib
LuCI  --->
      1. Collections
             -*- luci
             <*> luci-ssl
      2. Modules  --->
             -*- luci-base
             -*- luci-mod-admin-full
             <*> luci-mod-failsafe
             <*> luci-mod-rpc
      3. Applications
             <*> luci-app-ahcp
             <*> luci-app-asterisk
             -*- luci-app-firewall
             <*> luci-app-multiwan
             <*> luci-app-pbx
             <*> luci-app-radvd
             <*> luci-app-samba
             <*> luci-app-upnp
             <*> luci-app-wshaper
      4. Themes
             -*- luci-theme-bootstrap
             <*> luci-theme-openwrt
      5. Protocols
             <*> luci-proto-ipv6
             -*- luci-proto-ppp
Network  --->
      Telephony  --->
             -*- asterisk11
             -*- asterisk18
             <*> sipp
             <*> sipsak
      -*- ahcpd
      -*- hostapd-common
      -*- iw
      -*- samba36-server
      <*> wpad-mini
      -*- wshaper

Setelah selesai, kita perlu compile 

cd ~/openwrt.trunk/trunk
make clean
make defconfig
make world

Setelah jadi, kita perlu menambahkan driver wifi dan compile ulang secara manual berikut ini.

Cara Menambahkan Driver Wifi

Download patch 

cd ~
rm -Rf ~/rt2860v2-for-openwrt-mt7620/
git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git

Merge ke build directory 

cd ~
cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/

cd ~
cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/

Hati-hati folder 

/linux-ramips_mt7620/linux-3.14.26
/linux-ramips_mt7620/linux-3.14.27 
/linux-ramips_mt7620/linux-3.14.32
/linux-ramips_mt7620/linux-3.18.7

mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.


Tambahkan di Kconfig dan Makefile

Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD 

vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Kconfig 

source "drivers/mtd/ralink/Kconfig"
endif # MTD


Tambahkan kalimat berikut di akhir file makefile: 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Makefile

obj-$(CONFIG_MTD_RALINK)    += ralink/

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Kconfig 

source "drivers/net/wireless/rt2860v2_ap/Kconfig"
endif # WLAN

Tambahkan kalimat berikut di akhir file makefile: 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Makefile 

obj-$(CONFIG_RT2860V2_AP)   += rt2860v2_ap/

Tambahkan konfigurasi

Jalankan 

cd ~/openwrt.trunk/trunk
make kernel_menuconfig

Masukan konfigurasi berikut 

Machine selection  --->  
     System type (Ralink based machines)  --->
     Ralink SoC selection (MT7620/8)  --->
     Devicetree selection (None)  --->

Device Driver -->
      <*> Memory Technology Device (MTD) support  --->
             Ralink Flash Type support  --->
                   [*] Ralink MTD support  

Device Driver -->
      [*] Network device support  --->
             [*]   Wireless LAN  ---> 
                     <*>   Ralink RT2860 802.11n AP support
                     [*]     LED Support
                     [ ]     WSC (WiFi Simple Config)
                     [*]     LLTD (Link Layer Topology Discovery Protocol)
                     [*]     WDS
                     [*]     MBSSID
                     [*]       New MBSSID MODE
                     [*]     AP-CLient Support
                     [*]       MAC Repeater Support
                     [ ]     IGMP snooping (NEW)
                     [ ]     NETIF Block (NEW)
                     [ ]     DFS (NEW)
                     [*]     Carrier Detect
                     [ ]     DLS ((Direct-Link Setup) Support (NEW)
                     [ ]     IDS (Intrusion Detection System) Support (NEW)
                     [*]     CoC Support (NEW)
                     [ ]     Memory Optimization (NEW)
                     [ ]     Video Turbine support (NEW)
                     [ ]     802.11n Draft3 (NEW)
                     [ ]     Adjust Power Consumption Support (NEW
                     [ ]     Single SKU (NEW)
                     Choose Power Design (Internal PA and Internal LNA)  --->
                     [ ]   TSSI Compensation (NEW)
                     [ ]   Temperature Compensation (NEW)

Pastikan pilih (*) untuk membuat driver masuk ke kernel, bukan kernel module.

Buat lagi firmware

Ulangi lagi pembuatan firmware. Tapi

JANGAN LAKUKAN make clean 

cd ~/openwrt.trunk/trunk/
make world

Hasilnya ada di folder 

~/openwrt.trunk/trunk/bin/ramips

openwrt-ramips-mt7620-e1700-squashfs-factory.bin
openwrt-ramips-mt7620-e1700-squashfs-sysupgrade.bin
openwrt-ramips-mt7620-root.squashfs
openwrt-ramips-mt7620-uImage.bin
openwrt-ramips-mt7620-vmlinux.bin
openwrt-ramips-mt7620-vmlinux.elf

Flash Linksys E1700

Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,

  • Masuk ke web
  • Masuk ke menu system
  • Masuk ke menu firmware upgrade
  • Pilih file .bin berikut
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
  • Flash, jangan sampai listrik mati & sambungan LAN putus.


Device ra0 akan muncul 

ifconfig ra0

atau 

ifconfig wlan0

Kita tidak bisa mengkonfigurasi 

ifconfig ra0 up.

atau 

ifconfig wlan0 up

Karena kita tidak memiliki file 

/etc/Wireless/RT2860/RT2860.dat

Atau symbol link ke /tmp/RT2860.dat.

File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file 

RT2860.dat

Masukan di 

/etc/Wireless/RT2860/RT2860.dat
/tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Cara Membuat / Mengambil file RT2860.dat

Cara paling gampang. Download yang sudah jadi 

wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat

Cara yang lebih susah. Ambil file rt2860v2.sh dari 

https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh

Untuk MAC address WLAN bisa di set menggunakan file 

/etc/config/wireless

dengan parameter 

macaddr '1a:1a:1a:1a:1a:1a'

atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah 

hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'

Masukan hasil-nya ke parameter di RT2860.dat 

MacAddress=

Setelah kita mempunyai file 

RT2860.dat

Masukan di 

mkdir -p /etc/wireless/RT2860
mkdir -p /etc/Wireless/RT2860
cp RT2860.dat /etc/Wireless/RT2860/RT2860.dat
cp RT2860.dat /etc/wireless/RT2860/RT2860.dat
cp RT2860.dat /tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Lebih Lanjut

Referensi

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Build_Firmware_Linksys_E1700&oldid=43885"