Difference between revisions of "OpenBTS: N210 GNURadio"

From OnnoWiki
Jump to navigation Jump to search
 
(45 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Persiapan
 
Persiapan
  
  sudo apt-get install libboost-all-dev libusb-1.0-0-dev python-cheetah doxygen python-docutils \
+
  sudo apt-get -y install libboost-all-dev libusb-1.0-0-dev python-cheetah doxygen python-docutils \
  git python cmake
+
  git python cmake ethtool libfontconfig1-dev libxrender-dev libpulse-dev \
 +
gcc-4.7 g++ automake libtool python-dev libfftw3-dev \
 +
libcppunit-dev libboost-all-dev libusb-dev fort77 \
 +
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
 +
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
 +
python-cheetah python-lxml doxygen qt4-dev-tools \
 +
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
 +
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
 +
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
 +
autoconf libtool libosip2-dev libortp-dev \
 +
libusb-1.0-0-dev g++ erlang bison flex \
 +
subversion autoconf libtool libosip2-dev libortp-dev g++ sqlite3 libusb-1.0.0-dev \
 +
libsqlite3-dev erlang libreadline6-dev libboost-all-dev swig libfftw3-dev libcppunit-dev \
 +
libaudio-dev libusb-dev make
  
==Download Source Code GNURadio==
+
Test Ethernet di laptop / PC pastikan kita menggunakan Gigabit Ethernet.
 +
Cara men-test dengan menggunakan ethtool
 +
 
 +
apt -y install ethtool
 +
ethtool enp3s0
 +
 
 +
Harus keluar kira-kira seperti di bawah ini
 +
 
 +
Settings for enp3s0:
 +
Supported ports: [ TP MII ]
 +
Supported link modes:  10baseT/Half 10baseT/Full
 +
                        100baseT/Half 100baseT/Full
 +
                        1000baseT/Half 1000baseT/Full
 +
Supported pause frame use: No
 +
Supports auto-negotiation: Yes
 +
Supported FEC modes: Not reported
 +
Advertised link modes:  10baseT/Half 10baseT/Full
 +
                        100baseT/Half 100baseT/Full
 +
                        1000baseT/Half 1000baseT/Full
 +
Advertised pause frame use: Symmetric Receive-only
 +
Advertised auto-negotiation: Yes
 +
Advertised FEC modes: Not reported
 +
Link partner advertised link modes:  10baseT/Half 10baseT/Full
 +
                                    100baseT/Half 100baseT/Full
 +
Link partner advertised pause frame use: Symmetric Receive-only
 +
Link partner advertised auto-negotiation: Yes
 +
Link partner advertised FEC modes: Not reported
 +
Speed: 100Mb/s
 +
Duplex: Full
 +
Port: MII
 +
PHYAD: 0
 +
Transceiver: internal
 +
Auto-negotiation: on
 +
Supports Wake-on: pumbg
 +
Wake-on: g
 +
Current message level: 0x00000033 (51)
 +
      drv probe ifdown ifup
 +
Link detected: yes
 +
 
 +
Pastikan ethernet mampu bekerja pada Gbps (1000baseT).
 +
 
 +
 
 +
Set IP address interface ethernet
 +
 
 +
ifconfig enp3s0 192.168.10.1
 +
 
 +
Cek sambungan ke N210.
 +
 
 +
ping 192.168.10.2
 +
 
 +
HARUS ADA Responds!!!
 +
 
 +
PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
 +
64 bytes from 192.168.10.2: icmp_req=1 ttl=32 time=1.74 ms
 +
 
 +
Bagi anda yang menggunakan desktop Ubuntu sebaiknya di set juga dari Network Connection di Desktop agar menjadi IP address statik
 +
 
 +
 
 +
==Install SDCC==
 +
 
 +
Sebaiknya jangan mengcompile dari source code karena membuat pusing kepala.
 +
Install sdcc sebaiknya langsung dari file .deb saja.
 +
 
 +
wget -c http://launchpadlibrarian.net/38703081/sdcc_2.9.0-5_amd64.deb
 +
wget -c http://launchpadlibrarian.net/38689168/sdcc-libraries_2.9.0-5_all.deb
 +
dpkg -i sdcc_2.9.0-5_amd64.deb sdcc-libraries_2.9.0-5_all.deb
 +
 
 +
==Download Source Code UHD==
  
 
  echo "/usr/local/lib" >> /etc/ld.so.conf
 
  echo "/usr/local/lib" >> /etc/ld.so.conf
Line 10: Line 90:
 
  git clone git://ettus.sourcerepo.com/ettus/uhd.git uhd.git
 
  git clone git://ettus.sourcerepo.com/ettus/uhd.git uhd.git
  
==Compile==
+
===Compile UHD===
  
 
  cd /usr/local/src/uhd.git/host/
 
  cd /usr/local/src/uhd.git/host/
Line 18: Line 98:
 
  make
 
  make
 
  make test
 
  make test
 +
make install
 +
ldconfig
 +
 +
==Download & Compile GNURadio==
 +
 +
cd /usr/local/src
 +
wget -c http://voiprakyat.or.id/pub/openbts/usrp52mhz.patch
 +
wget -c http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz
 +
 +
cd /usr/local/src
 +
tar -zxf gnuradio-3.4.2.tar.gz
 +
cd gnuradio
 +
patch -p0 < ../usrp52mhz.patch
 +
./configure --enable-gr-uhd --disable-usrp2 --disable-usrp
 +
 +
===Perbaiki error: ‘intptr_t’===
 +
 +
vi /usr/local/src/gnuradio/gnuradio-core/src/lib/filter/qa_gri_mmse_fir_interpolator_cc.cc 
 +
 +
tambahkan
 +
 +
#include <unistd.h>
 +
 +
===Compile GNURadio===
 +
 +
cd /usr/local/src/gnuradio
 +
make
 
  make install
 
  make install
 
  ldconfig
 
  ldconfig
  
 
==Install UHD USRP ke udev==
 
==Install UHD USRP ke udev==
 +
 +
Lakukan
  
 
  cd /usr/local/share/uhd/utils
 
  cd /usr/local/share/uhd/utils
Line 29: Line 138:
 
==Install Image 003.005.000==
 
==Install Image 003.005.000==
  
Download UHD image
+
Download Image UHD 003.005.000
 +
 
 +
sudo /usr/local/lib/uhd/utils/uhd_images_downloader.py
 +
 
 +
Images successfully installed to: /usr/local/share/uhd/images
 +
 
 +
Burn ke N210, pastikan kita terhubung ke N210 & N210 dalam keadaan operasinal. Lakukan,
 +
 
 +
/usr/local/bin/usrp_n2xx_simple_net_burner --addr="192.168.10.2"
 +
 
 +
Hasilnya kira-kira
  
  cd ~
+
  linux; GNU C++ version 4.7.3; Boost_104900; UHD_003.005.003-112-gea418a85
  wget http://files.ettus.com/binaries/master_images/archive/uhd-images_003.005.000-release.tar.gz
+
 +
  Searching for USRP N2XX with IP address 192.168.10.2.
 +
Found n210_r4.
 +
 +
Searching for specified images.
 +
 +
Will burn the following images:
 +
  * Firmware: /usr/local/share/uhd/images/usrp_n210_fw.bin
 +
  * FPGA:    /usr/local/share/uhd/images/usrp_n210_r4_fpga.bin
 +
 +
Querying n210_r4 for flash information.
 +
  * Flash size:  4194304
 +
  * Sector size: 65536
 +
 +
Erasing FPGA image.
 +
  * Successfully erased 1572864 bytes at 1572864.
 +
Writing FPGA image.
 +
  * Successfully wrote 1311644 bytes.
 +
Verifying FPGA image.
 +
  * Successful.
 +
 +
Erasing firmware image.
 +
  * Successfully erased 31744 bytes at 3145728.
 +
Writing firmware image.
 +
  * Successfully wrote 16383 bytes.
 +
Verifying firmware image.
 +
  * Successful.
 +
 +
Image burning successful. Reset USRP (Y/n)? Y
 +
Resetting USRP.
  
Install
+
==Test==
  
rm -Rf /usr/share/uhd/images/*
+
===Find Device===
rm -Rf /usr/local/share/uhd/images/*
 
cd ~
 
tar zxvf uhd-images_003.005.000-release.tar.gz
 
cp -Rf uhd-images_003.005.000-release/share/uhd/images/ /usr/local/share/uhd/
 
  
Dalam /usr/local/share/uhd/images/ , file
+
Lakukan
  
* usrp_n210_fw.bin
+
uhd_find_devices
* usrp_n210_r2_fpga.bin
+
 
* usrp_n210_r3_fpga.bin
+
Hasilnya
* usrp_n210_r4_fpga.bin
+
 
 +
linux; GNU C++ version 4.7.3; Boost_104900; UHD_003.005.003-112-gea418a85
 +
 +
--------------------------------------------------
 +
-- UHD Device 0
 +
--------------------------------------------------
 +
Device Address:
 +
    type: usrp2
 +
    addr: 192.168.10.2
 +
    name:
 +
    serial: F306BB
 +
 
 +
===Test GPSDO===
 +
 
 +
Test GPSDO
 +
 
 +
cd /usr/local/src/uhd.git/host/examples
 +
wget https://sites.google.com/site/byungchulweb/gnufile/gps_test.cpp
 +
 
 +
Masukan
 +
 
 +
vi /usr/local/src/uhd.git/host/examples/CMakeLists.txt
 +
 
 +
masukan
 +
 
 +
gps_test.cpp
 +
 
 +
Compile
 +
 
 +
cd ..
 +
cd build
 +
cmake ../
 +
make
 +
make test
 +
sudo make install
 +
sudo ldconfig
 +
 
 +
Test
 +
 
 +
cd /usr/local/src/uhd.git/host/build/examples
 +
sudo ./gps_test
 +
 
 +
Hasilnya
 +
 
 +
..
 +
..
 +
-- Setting references to the internal GPSDO
 +
-- Initializing time to the internal GPSDO
 +
Using Device: Single USRP:
 +
  Device: USRP2 / N-Series Device
 +
  Mboard 0: N210r4
 +
  RX Channel: 0
 +
    RX DSP: 0
 +
    RX Dboard: A
 +
    RX Subdev: WBXv3 RX+GDB
 +
  TX Channel: 0
 +
    TX DSP: 0
 +
    TX Dboard: A
 +
    TX Subdev: WBXv3 TX+GDB
 +
 +
GPS epoch time: 1136081736 seconds
 +
GPS lock status: unlocked
 +
  PS_GPGGA: $GPGGA,021536.00,0000.0000,N,00000.0000,E,0,99,1.0,0.0,M,0.0,M,,*5F
 +
  PS_GPRMC: $GPRMC,021536.00,V,0000.0000,N,00000.0000,E,0.0,0.0,010106,,*21
 +
 
 +
===Test uhd usrp probe===
 +
 
 +
cd /usr/local/bin
 +
./uhd_usrp_probe
 +
 
 +
 
 +
Hasilnya
 +
 
 +
..
 +
..
 +
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
 +
-- found
 +
-- Setting references to the internal GPSDO
 +
-- Initializing time to the internal GPSDO
 +
  _____________________________________________________
 +
  /
 +
|      Device: USRP2 / N-Series Device
 +
|    _____________________________________________________
 +
|    /
 +
|  |      Mboard: N210r4
 +
|  |  hardware: 2577
 +
|  |  mac-addr: 00:80:2f:0a:d0:9c
 +
|  |  ip-addr: 192.168.10.2
 +
|  |  subnet: 255.255.255.255
 +
|  |  gateway: 255.255.255.255
 +
|  |  gpsdo: none
 +
|  |  serial: F306BB
 +
|  |  FW Version: 12.3
 +
|  |  FPGA Version: 10.0
 +
|  | 
 +
|  |  Time sources: none, external, _external_, mimo, gpsdo
 +
|  |  Clock sources: internal, external, mimo, gpsdo
 +
|  |  Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, mimo_locked, ref_locked
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX DSP: 0
 +
|  |  |  Freq range: -50.000 to 50.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX DSP: 1
 +
|  |  |  Freq range: -50.000 to 50.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX Dboard: A
 +
|  |  |  ID: WBX v3, WBX v3 + Simple GDB (0x0057)
 +
|  |  |  Serial: F35DB9
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      RX Frontend: 0
 +
|  |  |  |  Name: WBXv3 RX+GDB
 +
|  |  |  |  Antennas: TX/RX, RX2, CAL
 +
|  |  |  |  Sensors: lo_locked
 +
|  |  |  |  Freq range: 68.750 to 2200.000 Mhz
 +
|  |  |  |  Gain range PGA0: 0.0 to 31.5 step 0.5 dB
 +
|  |  |  |  Connection Type: IQ
 +
|  |  |  |  Uses LO offset: No
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      RX Codec: A
 +
|  |  |  |  Name: ads62p44
 +
|  |  |  |  Gain range digital: 0.0 to 6.0 step 0.5 dB
 +
|  |  |  |  Gain range fine: 0.0 to 0.5 step 0.1 dB
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      TX DSP: 0
 +
|  |  |  Freq range: -250.000 to 250.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      TX Dboard: A
 +
|  |  |  ID: WBX v3 (0x0056)
 +
|  |  |  Serial: F35DB9
 +
|  |  |  ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB (0x004f)
 +
|  |  |  Serial: 0
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      TX Frontend: 0
 +
|  |  |  |  Name: WBXv3 TX+GDB
 +
|  |  |  |  Antennas: TX/RX, CAL
 +
|  |  |  |  Sensors: lo_locked
 +
|  |  |  |  Freq range: 68.750 to 2200.000 Mhz
 +
|  |  |  |  Gain range PGA0: 0.0 to 31.0 step 1.0 dB
 +
|  |  |  |  Connection Type: IQ
 +
|  |  |  |  Uses LO offset: No
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      TX Codec: A
 +
|  |  |  |  Name: ad9777
 +
|  |  |  |  Gain Elements: None
  
digunakan untuk USRP N210
 
  
  
  
==Test==
 
  
 
===Test clock 52MHz===
 
===Test clock 52MHz===
Line 62: Line 356:
 
Hasilnya kira-kira
 
Hasilnya kira-kira
  
 +
..
 +
..
 +
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
 +
-- found
 +
-- Setting references to the internal GPSDO
 +
-- Initializing time to the internal GPSDO
 +
  _____________________________________________________
 +
  /
 +
|      Device: USRP2 / N-Series Device
 +
|    _____________________________________________________
 +
|    /
 +
|  |      Mboard: N210r4
 +
|  |  hardware: 2577
 +
|  |  mac-addr: 00:80:2f:0a:d0:9c
 +
|  |  ip-addr: 192.168.10.2
 +
|  |  subnet: 255.255.255.255
 +
|  |  gateway: 255.255.255.255
 +
|  |  gpsdo: none
 +
|  |  serial: F306BB
 +
|  |  FW Version: 12.3
 +
|  |  FPGA Version: 10.0
 +
|  | 
 +
|  |  Time sources: none, external, _external_, mimo, gpsdo
 +
|  |  Clock sources: internal, external, mimo, gpsdo
 +
|  |  Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, mimo_locked, ref_locked
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX DSP: 0
 +
|  |  |  Freq range: -50.000 to 50.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX DSP: 1
 +
|  |  |  Freq range: -50.000 to 50.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      RX Dboard: A
 +
|  |  |  ID: WBX v3, WBX v3 + Simple GDB (0x0057)
 +
|  |  |  Serial: F35DB9
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      RX Frontend: 0
 +
|  |  |  |  Name: WBXv3 RX+GDB
 +
|  |  |  |  Antennas: TX/RX, RX2, CAL
 +
|  |  |  |  Sensors: lo_locked
 +
|  |  |  |  Freq range: 68.750 to 2200.000 Mhz
 +
|  |  |  |  Gain range PGA0: 0.0 to 31.5 step 0.5 dB
 +
|  |  |  |  Connection Type: IQ
 +
|  |  |  |  Uses LO offset: No
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      RX Codec: A
 +
|  |  |  |  Name: ads62p44
 +
|  |  |  |  Gain range digital: 0.0 to 6.0 step 0.5 dB
 +
|  |  |  |  Gain range fine: 0.0 to 0.5 step 0.1 dB
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      TX DSP: 0
 +
|  |  |  Freq range: -250.000 to 250.000 Mhz
 +
|  |    _____________________________________________________
 +
|  |    /
 +
|  |  |      TX Dboard: A
 +
|  |  |  ID: WBX v3 (0x0056)
 +
|  |  |  Serial: F35DB9
 +
|  |  |  ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB (0x004f)
 +
|  |  |  Serial: 0
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      TX Frontend: 0
 +
|  |  |  |  Name: WBXv3 TX+GDB
 +
|  |  |  |  Antennas: TX/RX, CAL
 +
|  |  |  |  Sensors: lo_locked
 +
|  |  |  |  Freq range: 68.750 to 2200.000 Mhz
 +
|  |  |  |  Gain range PGA0: 0.0 to 31.0 step 1.0 dB
 +
|  |  |  |  Connection Type: IQ
 +
|  |  |  |  Uses LO offset: No
 +
|  |  |    _____________________________________________________
 +
|  |  |    /
 +
|  |  |  |      TX Codec: A
 +
|  |  |  |  Name: ad9777
 +
|  |  |  |  Gain Elements: None
 +
 +
===Test Benchmark===
 +
 +
cd /usr/local/src/uhd.git/host/build/examples
 +
./benchmark_rate --rx_rate 10000000 --tx_rate 10000000
 +
 +
Hasilnya kira-kira
 +
 +
..
 +
..
 +
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
 +
-- found
 +
-- Setting references to the internal GPSDO
 +
-- Initializing time to the internal GPSDO
 +
 +
UHD Warning:
 +
    get_time: ValueError: get_nmea(): no GPRMC message found
 +
Using Device: Single USRP:
 +
  Device: USRP2 / N-Series Device
 +
  Mboard 0: N210r4
 +
  RX Channel: 0
 +
    RX DSP: 0
 +
    RX Dboard: A
 +
    RX Subdev: WBXv3 RX+GDB
 +
  TX Channel: 0
 +
    TX DSP: 0
 +
    TX Dboard: A
 +
    TX Subdev: WBXv3 TX+GDB
 +
 +
Testing receive rate 10.000000 Msps on 1 channels
 +
Testing transmit rate 10.000000 Msps on 1 channels
 +
 +
Benchmark rate summary:
 +
  Num received samples:    100107777
 +
  Num dropped samples:    0
 +
  Num overflows detected:  0
 +
  Num transmitted samples: 100229019
 +
  Num sequence errors:    0
 +
  Num underflows detected: 0
 +
 +
Done!
  
 
==Referensi==
 
==Referensi==
  
 +
* http://voiprakyat.or.id/pub/openbts/install.txt
 
* http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Gnuradio-UHD
 
* http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Gnuradio-UHD
 
* http://files.ettus.com/uhd_docs/manual/html/build.html
 
* http://files.ettus.com/uhd_docs/manual/html/build.html
 
* http://files.ettus.com/uhd_docs/manual/html/images.html
 
* http://files.ettus.com/uhd_docs/manual/html/images.html
 
* http://files.ettus.com/uhd_docs/manual/html/transport.html#linux-specific-notes
 
* http://files.ettus.com/uhd_docs/manual/html/transport.html#linux-specific-notes
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
 +
 +
===Persiapan===
 +
 +
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 +
* [[USRP: ClockTamer Flashing]]
 +
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
 +
* [[USRP: Tip Pemesanan]]
 +
 +
===Script===
 +
 +
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
 +
 +
===OpenBTS 2.6===
 +
 +
* [[GNURadio]]
 +
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Menggunakan UHD]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Contoh Aplikasi]]
 +
* [[GNURadio: Spectrum Analizer GSM]]
 +
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 +
* [[GNURadio: Programming Untuk Pemula]]
 +
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 +
* [[OpenBTS: Kalibrasi]]
 +
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
 +
* [[OpenBTS: Menjalankan smqueue]]
 +
* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
 +
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 +
* [[OpenBTS: Operasi 1800 MHz]]
 +
* [[OpenBTS: Beberapa Tips]]
 +
* [[OpenBTS: USRP2]]
 +
* [[OpenBTS: Amplifier]]
 +
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
 +
 +
===OpenBTS 2.8===
 +
 +
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
 +
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Install UHD]]
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Identifikasi Device]]
 +
* [[OpenBTS: Ubuntu 11.10 Install]]
 +
* [[OpenBTS: dari GIT ttsou]]
 +
* [[OpenBTS: 2.8 dari SVN Install]]
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 +
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Config Test]]
 +
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]]
 +
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 +
* [[OpenBTS: Database SQLite]]
 +
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: Set SQLite parameter smqueue]]
 +
* [[OpenBTS: FreeSWITCH]]
 +
 +
===Multi OpenBTS 2.8===
 +
 +
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
 +
* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
 +
* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
 +
* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
 +
* [[Multi OpenBTS: Catatan BCCH]]
 +
* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
 +
 +
===Ettus E110===
 +
 +
* [[OpenBTS: E110 Cara Login]]
 +
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Cek Daughter Board]]
 +
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 +
* [[OpenBTS: E110 Konfigurasi Jaringan]]
 +
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 Instalasi iptables]]
 +
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Compile UHD]] ''Not Recommended''
 +
* [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended''
 +
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended''
 +
* [[OpenBTS: E110 Install UHD Image]] ''Not Recommended''
 +
* [[OpenBTS: E110 Instalasi OpenBTS]]
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Yate Softswitch]]
 +
 +
===Ettus N210===
 +
 +
* [[OpenBTS: N210 Instalasi GPSDO Kit]]
 +
* [[OpenBTS: N210 GNURadio]]
 +
* [[OpenBTS: N210 GNURadio 3.7.0]]
 +
* [[OpenBTS: N210 Instalasi OpenBTS]]
 +
* [[OpenBTS: N210 Instalasi Yate]]
 +
* [[OpenBTS: N210 Yate Config Test]]
 +
* [[OpenBTS: N210 Burn Firmware]]
 +
 +
===RangeNetworks===
 +
 +
* [[OpenBTS: RangeNetwork Foto]]
 +
* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
 +
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Instalasi UHD]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[OpenBTS: RangeNetwork Audit]]
 +
* [[VoIP: Trunk]]
 +
 +
===GPRS===
 +
 +
* [[OpenBTS: GPRS]]
 +
* [[OpenBTS: GPRS Konfigurasi]]
 +
* [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]]
 +
 +
===Briker OpenBTS===
 +
 +
* [[OpenBTS: Briker]]
 +
 +
===FreeSWITCH OpenBTS===
 +
 +
* [[OpenBTS: FreeSWITCH]]
 +
 +
===Power Amplifier===
 +
 +
* [[Driver 900MHz]]
 +
* [[Power Amplifier 900MHz]]
 +
* [[Duplexer]]
 +
* [[OpenBTS: Menaikan Jangkauan OpenBTS]]
 +
 +
===Lain Lain===
 +
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 +
* [[Membuat Base Station GSM Open Source]]
 +
* [[Teknologi Selular]]
 +
* [[GSM: Daftar Channel Frekuensi]]
 +
* [[Wireless Internet]]
 +
* [[OpenBSC]]
 +
* [[AirProbe]]
 +
* [[Base station subsystem]]
 +
* [[GSM]]
 +
* [[Asterisk]]
 +
* [[Mobile phone]]
 +
 +
===Catatan Legal dan Pendukung===
 +
 +
* [[Siapa Bilang OpenBTS Ilegal?]]
 +
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 +
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
 +
 +
===Catatan Sejarah===
 +
 +
* [[2011/04/30 - Workshop OpenBTS Pertama di Indonesia dilakukan di Univ Gajah Putih Takengon Aceh Tengah]]
 +
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 +
* [[OpenBTS: Daftar Artikel di Media]]
 +
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 +
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
 +
 +
===Dokumentasi Video===
 +
 +
* http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
 +
* http://youtu.be/8ogOcUSpINU (1/6)
 +
* http://youtu.be/F5d7HGuhppk (2/6)
 +
* http://youtu.be/90Jgq6bOgrQ (3/6)
 +
* http://youtu.be/cNkx_qNqdfc (4/6)
 +
* http://youtu.be/6LCuoeI57ak (5/6)
 +
* http://youtu.be/-dEqcHoIlYk (6/6)
 +
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 +
 +
===Perjuangan OpenBTS===
 +
 +
* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 +
 +
 +
 +
[[Category: Wireless]]
 +
[[Category: Selular]]

Latest revision as of 14:11, 14 January 2020

Persiapan

sudo apt-get -y install libboost-all-dev libusb-1.0-0-dev python-cheetah doxygen python-docutils \
git python cmake ethtool libfontconfig1-dev libxrender-dev libpulse-dev \
gcc-4.7 g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ erlang bison flex \
subversion autoconf libtool libosip2-dev libortp-dev g++ sqlite3 libusb-1.0.0-dev \
libsqlite3-dev erlang libreadline6-dev libboost-all-dev swig libfftw3-dev libcppunit-dev \
libaudio-dev libusb-dev make

Test Ethernet di laptop / PC pastikan kita menggunakan Gigabit Ethernet. Cara men-test dengan menggunakan ethtool

apt -y install ethtool
ethtool enp3s0

Harus keluar kira-kira seperti di bawah ini

Settings for enp3s0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Half 1000baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 100Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000033 (51)
	 		       drv probe ifdown ifup
	Link detected: yes

Pastikan ethernet mampu bekerja pada Gbps (1000baseT).


Set IP address interface ethernet

ifconfig enp3s0 192.168.10.1

Cek sambungan ke N210.

ping 192.168.10.2

HARUS ADA Responds!!!

PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
64 bytes from 192.168.10.2: icmp_req=1 ttl=32 time=1.74 ms

Bagi anda yang menggunakan desktop Ubuntu sebaiknya di set juga dari Network Connection di Desktop agar menjadi IP address statik


Install SDCC

Sebaiknya jangan mengcompile dari source code karena membuat pusing kepala. Install sdcc sebaiknya langsung dari file .deb saja.

wget -c http://launchpadlibrarian.net/38703081/sdcc_2.9.0-5_amd64.deb
wget -c http://launchpadlibrarian.net/38689168/sdcc-libraries_2.9.0-5_all.deb
dpkg -i sdcc_2.9.0-5_amd64.deb sdcc-libraries_2.9.0-5_all.deb

Download Source Code UHD

echo "/usr/local/lib" >> /etc/ld.so.conf
cd /usr/local/src
git clone git://ettus.sourcerepo.com/ettus/uhd.git uhd.git

Compile UHD

cd /usr/local/src/uhd.git/host/
mkdir build
cd /usr/local/src/uhd.git/host/build
cmake -DENABLE_LIBUHD=ON -DENABLE_EXAMPLES=ON -DENABLE_UTILS=ON -DENABLE_TESTS=ON ../
make
make test
make install
ldconfig

Download & Compile GNURadio

cd /usr/local/src
wget -c http://voiprakyat.or.id/pub/openbts/usrp52mhz.patch
wget -c http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz
cd /usr/local/src
tar -zxf gnuradio-3.4.2.tar.gz
cd gnuradio
patch -p0 < ../usrp52mhz.patch
./configure --enable-gr-uhd --disable-usrp2 --disable-usrp

Perbaiki error: ‘intptr_t’

vi /usr/local/src/gnuradio/gnuradio-core/src/lib/filter/qa_gri_mmse_fir_interpolator_cc.cc  

tambahkan

#include <unistd.h>

Compile GNURadio

cd /usr/local/src/gnuradio
make
make install
ldconfig

Install UHD USRP ke udev

Lakukan

cd /usr/local/share/uhd/utils
sudo cp uhd-usrp.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules

Install Image 003.005.000

Download Image UHD 003.005.000

sudo /usr/local/lib/uhd/utils/uhd_images_downloader.py
Images successfully installed to: /usr/local/share/uhd/images

Burn ke N210, pastikan kita terhubung ke N210 & N210 dalam keadaan operasinal. Lakukan,

/usr/local/bin/usrp_n2xx_simple_net_burner --addr="192.168.10.2"

Hasilnya kira-kira

linux; GNU C++ version 4.7.3; Boost_104900; UHD_003.005.003-112-gea418a85

Searching for USRP N2XX with IP address 192.168.10.2.
Found n210_r4.

Searching for specified images.

Will burn the following images:
 * Firmware: /usr/local/share/uhd/images/usrp_n210_fw.bin
 * FPGA:     /usr/local/share/uhd/images/usrp_n210_r4_fpga.bin

Querying n210_r4 for flash information.
 * Flash size:  4194304
 * Sector size: 65536

Erasing FPGA image.
 * Successfully erased 1572864 bytes at 1572864.
Writing FPGA image.
 * Successfully wrote 1311644 bytes.
Verifying FPGA image.
 * Successful.

Erasing firmware image.
 * Successfully erased 31744 bytes at 3145728.
Writing firmware image.
 * Successfully wrote 16383 bytes.
Verifying firmware image.
 * Successful.

Image burning successful. Reset USRP (Y/n)? Y
Resetting USRP.

Test

Find Device

Lakukan

uhd_find_devices 

Hasilnya

linux; GNU C++ version 4.7.3; Boost_104900; UHD_003.005.003-112-gea418a85

--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
    type: usrp2
    addr: 192.168.10.2
    name: 
    serial: F306BB

Test GPSDO

Test GPSDO

cd /usr/local/src/uhd.git/host/examples
wget https://sites.google.com/site/byungchulweb/gnufile/gps_test.cpp

Masukan

vi /usr/local/src/uhd.git/host/examples/CMakeLists.txt 

masukan

gps_test.cpp

Compile

cd ..
cd build
cmake ../
make
make test
sudo make install
sudo ldconfig

Test

cd /usr/local/src/uhd.git/host/build/examples
sudo ./gps_test

Hasilnya

..
..
-- Setting references to the internal GPSDO
-- Initializing time to the internal GPSDO
Using Device: Single USRP:
  Device: USRP2 / N-Series Device
  Mboard 0: N210r4
  RX Channel: 0
    RX DSP: 0
    RX Dboard: A
    RX Subdev: WBXv3 RX+GDB
  TX Channel: 0
    TX DSP: 0
    TX Dboard: A
    TX Subdev: WBXv3 TX+GDB

GPS epoch time: 1136081736 seconds
GPS lock status: unlocked
 PS_GPGGA: $GPGGA,021536.00,0000.0000,N,00000.0000,E,0,99,1.0,0.0,M,0.0,M,,*5F
 PS_GPRMC: $GPRMC,021536.00,V,0000.0000,N,00000.0000,E,0.0,0.0,010106,,*21

Test uhd usrp probe

cd /usr/local/bin
./uhd_usrp_probe


Hasilnya

..
..
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
-- found
-- Setting references to the internal GPSDO
-- Initializing time to the internal GPSDO
  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: N210r4
|   |   hardware: 2577
|   |   mac-addr: 00:80:2f:0a:d0:9c
|   |   ip-addr: 192.168.10.2
|   |   subnet: 255.255.255.255
|   |   gateway: 255.255.255.255
|   |   gpsdo: none
|   |   serial: F306BB
|   |   FW Version: 12.3
|   |   FPGA Version: 10.0
|   |   
|   |   Time sources: none, external, _external_, mimo, gpsdo
|   |   Clock sources: internal, external, mimo, gpsdo
|   |   Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, mimo_locked, ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: WBX v3, WBX v3 + Simple GDB (0x0057)
|   |   |   Serial: F35DB9
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: WBXv3 RX+GDB
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ads62p44
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |   |   |   Gain range fine: 0.0 to 0.5 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -250.000 to 250.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: WBX v3 (0x0056)
|   |   |   Serial: F35DB9
|   |   |   ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB (0x004f)
|   |   |   Serial: 0
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: WBXv3 TX+GDB
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 31.0 step 1.0 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9777
|   |   |   |   Gain Elements: None 



Test clock 52MHz

cd /usr/local/bin
./uhd_usrp_probe --args="master_clock_rate=52e6"

Hasilnya kira-kira

..
..
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
-- found
-- Setting references to the internal GPSDO
-- Initializing time to the internal GPSDO
  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: N210r4
|   |   hardware: 2577
|   |   mac-addr: 00:80:2f:0a:d0:9c
|   |   ip-addr: 192.168.10.2
|   |   subnet: 255.255.255.255
|   |   gateway: 255.255.255.255
|   |   gpsdo: none
|   |   serial: F306BB
|   |   FW Version: 12.3
|   |   FPGA Version: 10.0
|   |   
|   |   Time sources: none, external, _external_, mimo, gpsdo
|   |   Clock sources: internal, external, mimo, gpsdo
|   |   Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, mimo_locked, ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: WBX v3, WBX v3 + Simple GDB (0x0057)
|   |   |   Serial: F35DB9
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: WBXv3 RX+GDB
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ads62p44
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |   |   |   Gain range fine: 0.0 to 0.5 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -250.000 to 250.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: WBX v3 (0x0056)
|   |   |   Serial: F35DB9
|   |   |   ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB (0x004f)
|   |   |   Serial: 0
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: WBXv3 TX+GDB
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 68.750 to 2200.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 31.0 step 1.0 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9777
|   |   |   |   Gain Elements: None

Test Benchmark

cd /usr/local/src/uhd.git/host/build/examples
./benchmark_rate --rx_rate 10000000 --tx_rate 10000000

Hasilnya kira-kira

..
..
-- Detecting internal GPSDO.... Found a Jackson Labs GPS
-- found
-- Setting references to the internal GPSDO
-- Initializing time to the internal GPSDO

UHD Warning:
    get_time: ValueError: get_nmea(): no GPRMC message found
Using Device: Single USRP:
  Device: USRP2 / N-Series Device
  Mboard 0: N210r4
  RX Channel: 0
    RX DSP: 0
    RX Dboard: A
    RX Subdev: WBXv3 RX+GDB
  TX Channel: 0
    TX DSP: 0
    TX Dboard: A
    TX Subdev: WBXv3 TX+GDB

Testing receive rate 10.000000 Msps on 1 channels
Testing transmit rate 10.000000 Msps on 1 channels

Benchmark rate summary:
  Num received samples:    100107777
  Num dropped samples:     0
  Num overflows detected:  0
  Num transmitted samples: 100229019
  Num sequence errors:     0
  Num underflows detected: 0 

Done!

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS