OpenBTS: E110 Kalibrasi Clock

From OnnoWiki
Revision as of 11:03, 29 May 2012 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Download kal

Download dari

http://thre.at/kalibrate/kal-v0.4.1.tar.bz2


Download ttsou Kal

Download dari mesin lain & scp ke E110

https://github.com/ttsou/kalibrate-uhd/zipball/master
cd ~/Downloads
scp ttsou-kalibrate-uhd-8200e28.zip root@192.168.0.148:

Atau via git (kadang gagal sih ini)

cd ~/src
git clone https://github.com/ttsou/kalibrate-uhd.git kalibrate-uhd

Compile

Jika di download via web

opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native
opkg install fftwf fftwf-dev task-sdk-gnuradio-native
cd ~
mv ttsou-kalibrate-uhd-8200e28.zip src/
cd src
unzip ttsou-kalibrate-uhd-8200e28.zip 
cd ~/src/ttsou-kalibrate-uhd-8200e28
./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make


Jika di download via git

opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native
opkg install fftwf fftwf-dev task-sdk-gnuradio-native
cd ~/src/kalibrate-uhd
./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make


Error fftw3

Saat ./configure keluar error

checking for FFTW3... configure: error: Package requirements (fftw3 >= 3.0) were not met:

No package 'fftw3' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables FFTW3_CFLAGS
and FFTW3_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


SOLUSI: belum ada.

Melakukan Kalibrasi

Gunakan Kalibrate atau Kalibrate-UHD untuk mengukur offset frekuensi,

[root@openBTS kal-0.2]# ./kal -f 946600000 -u
USRP side: B
FPGA clock: 52000000
Decimation: 192
Antenna: RX2
Sample rate: 270833.343750
average [min, max] (range, stddev)
501.351685 [461, 546] (85, 19.314581)
overruns: 0
not found: 0

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Ettus E110

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah