Mikrotik: OSPF Sederhana distribute default routing

From OnnoWiki
Revision as of 15:16, 13 November 2018 by Onnowpurbo (talk | contribs) (Created page with "center|400px|thumb Router1: /ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip dhcp-c...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Image6005.gif


Router1:

/ip address add address=10.10.1.1/30 interface=ether1
/ip address add address=10.10.1.5/30 interface=ether2
/ip dhcp-client add interface=ether3 disabled=no
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade
/ip firewall nat print
/routing ospf network add network=10.10.1.0/24 area=backbone

Router2:

/ip address add address=10.10.1.6/30 interface=ether1
/ip address add address=10.10.1.9/30 interface=ether2
/ip address add address=172.16.1.1/16 interface=ether3
/routing ospf network add network=172.16.0.0/16 area=backbone
/routing ospf network add network=10.10.1.0/24 area=backbone

Router3:

/ip address add address=10.10.1.2/30 interface=ether1
/ip address add address=10.10.1.10/30 interface=ether2
/ip address add address=192.168.1.1/24 interface=ether3
/routing ospf network add network=192.168.1.0/24 area=backbone
/routing ospf network add network=10.10.1.0/24 area=backbone


Cek

/routing ospf instance print 
Flags: X - disabled 
 0   name="default" router-id=0.0.0.0 distribute-default=never 
     redistribute-connected=as-type-1 redistribute-static=as-type-1 
     redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no 
     metric-default=1 metric-connected=20 metric-static=20 metric-rip=20 
     metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in 
out-filter=ospf-out


Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.

Tambahan untuk distribute default routing

R1:

/interface bridge
add name=Loopback
/routing ospf instance
set [ find default=yes ] distribute-default=always-as-type-1 \
    redistribute-connected=as-type-1 router-id=10.10.1.1
/ip dns set servers=8.8.8.8

R2:

/routing ospf instance
set [ find default=yes ] router-id=10.10.1.6
/ip dns set servers=8.8.8.8

R3:


/routing ospf instance
set [ find default=yes ] router-id=10.10.1.2
/ip dns set servers=8.8.8.8


Verify

Cek

R1:

/routing ospf interface print
/routing ospf neighbor print
/ip route print

Lakukan yang sama untuk R2, R3





Referensi


Pranala Menarik