Cisco: Tunnel IPv6

Tool yang digunakan

• GNS3
• 3 Router Cisco C7200
• 1 Kali Linux
• 1 Virtual PC

R1 enable configure terminal interface Ethernet 1/0 no shutdown ip address 12.12.12.1 255.255.255.0 exit interface Ethernet 1/1 no shutdown ip address 13.13.13.1 255.255.255.0 exit

R2 enable configure terminal interface Ethernet 1/0 no shutdown ip address 12.12.12.2 255.255.255.0 exit interface Ethernet 1/1 no shutdown ipv6 address 2001:1:2:3::1/64 exit

R3 enable configure terminal interface Ethernet 1/0 no shutdown ip address 13.13.13.3 255.255.255.0 exit interface Ethernet 1/1 no shutdown ipv6 address 2001:4:5:6::1/64 exit

check do ping

Aktifkan OSPF di R1, R2, R3 agar IPv4 bisa komunikasi

R1 router ospf 1 network 12.12.12.0 0.0.0.255 area 0 network 13.13.13.0 0.0.0.255 area 0 exit

R2 router ospf 1 network 12.12.12.0 0.0.0.255 area 0 exit

R3 router ospf 1 network 13.13.13.0 0.0.0.255 area 0 exit

Buat tunnel

R2 interface tunnel 0 no shutdown tunnel source 12.12.12.2 tunnel destination 13.13.13.3 exit

R3 interface tunnel 0 no shutdown tunnel source 13.13.13.3 tunnel destination 12.12.12.2 exit

R2 interface tunnel 0 ipv6 enable exit ipv6 unicast-routing ipv6 router eigrp 1 eigrp router-id 2.2.2.2 no shutdown exit interface tunnel 0 ipv6 eigrp 1 exit interface Ethernet 1/1 ipv6 eigrp 1 exit

R3 interface tunnel 0 ipv6 enable exit ipv6 unicast-routing ipv6 router eigrp 1 eigrp router-id 3.3.3.3 no shutdown exit interface tunnel 0 ipv6 eigrp 1 exit interface Ethernet 1/1 ipv6 eigrp 1 exit

do ping protocol[ip]: ipv6 Target IPv6 address: 2001:1:2:3::1