IPv6: Cisco: OSPF Howto
Revision as of 17:10, 6 January 2019 by Onnowpurbo (talk | contribs)
enable
configure terminal
router ospfv3 [process-id]
area area-ID [default-cost | nssa | stub]
auto-cost reference-bandwidth Mbps
bfd all-interfaces
default {area area-ID [range ipv6-prefix | virtual-link router-id]} [default-information originate [always | metric | metric-type | route-map] | distance | distribute-list prefix-list prefix-list-name {in | out} [interface] | maximum-paths paths | redistribute protocol | summary-prefix ipv6-prefix]
ignore lsa mospf
interface-id snmp-if-index
log-adjacency-changes [detail]
passive-interface [default | interface-type interface-number]
queue-depth {hello | update} {queue-size | unlimited}
router-id router-id
Contoh
Stub Router
ipv6 unicast-routing ipv6 cef ! interface serial 0/0 no ip address ipv6 enable ipv6 address 2001:ABAB::/64 eui-64 ipv6 ospf 1 area 2 ! ipv6 router ospf 1 router-id 3.3.3.3 area 2 stub !
ABR1 Router
ipv6 unicast-routing ipv6 cef ! interface FastEthernet0/0 no ip address speed auto ipv6 address 2003::1/124 ipv6 enable ipv6 ospf 1 area 0 ! interface Serial0/0 no ip address ipv6 address 2002:ABAB::/64 eui-64 ipv6 enable ipv6 ospf 1 area 2 ! ipv6 router ospf 1 router-id 1.1.1.1 area 2 stub no-summary !
ASBR Router
ipv6 unicast-routing ipv6 cef ! interface FastEthernet0/0 no ip address ipv6 address 2003::2/124 ipv6 enable ipv6 ospf 1 area 0 ! interface Serial0/0 no ip address ipv6 address 2003::1:1/124 ipv6 enable ipv6 rip EXT enable ! ipv6 router ospf 1 router-id 2.2.2.2 default-metric 25 redistribute rip EXT metric-type 1 include-connected ! ipv6 router rip EXT redistribute ospf 1 match internal external 1 external 2 include-connected !
External Router
ipv6 unicast-routing ipv6 cef ! interface Loopback0 no ip address ipv6 address 2004:ABAB::/64 eui-64 ipv6 enable ipv6 rip EXT enable ! interface Serial0/0 no ip address ipv6 address 2003::1:2/124 ipv6 enable ipv6 rip EXT enable ! ipv6 router rip EXT
Pranala Menarik