OpenWRT: Flash Buffalo WZRHP300N
Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n
Buat Script
vi buatflashbuffalo.sh
Isi dengan
ifconfig eth0:11 192.168.11.2 arp -s 192.168.11.1 02:aa:bb:cc:dd:ff curl -T openwrt-ar71xx-generic-wzr-hp-g300n-squashfs-tftp.bin tftp://192.168.11.1
Save script di tempat firmware openwrt tersebut berada.
- Matikan Buffalo
- Masukan kabel LAN PC ke LAN4 Buffalo yang pas sebelah Internet.
- Masuk ke folder tempat image openwrt berada.
- Jadi superuser
sudo su
- Masukan power Buffalo
- Secepatnya jalankan
./buatflashbuffalo.sh
Akan tampak pada layar
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2560k 0 0 100 2560k 0 197k 0:00:12 0:00:12 --:--:-- 367k
100 2560k 0 0 100 2560k 0 197k 0:00:12 0:00:12 --:--:-- 197k
Jika kita cek arp -n akan tampak
arp -n
Address HWtype HWaddress Flags Mask Iface 192.168.11.1 ether 02:aa:bb:cc:dd:23 CM eth0
Referensi
Pranala Menarik
- OpenWRT
- OpenWRT: Download Firmware yang sudah jadi
- OpenWRT: Source Repository Download
- OpenWRT: Melihat Daftar Package
- OpenWRT: Build Firmware
- OpenWRT: Build Firmware Buffalo WZRHPG450H
- OpenWRT: Build Firmware Buffalo WZRHPG300N
- OpenWRT: Build Firmware Ubiquiti NanoStation2
- OpenWRT: Build Firmware Mikrotik RB433
- OpenWRT: Build Firmware Linksys WRT160NL
- OpenWRT: Build Firmware Linksys WRT54GL
- OpenWRT: Flash Linksys WRT54GL
- OpenWRT: Flash Buffalo WZRHP450H
- OpenWRT: Flash Buffalo WZRHP300N
- OpenWRT: Mikrotik RB433
- OpenWRT: 3G modem
- OpenWRT: Build Firmware dengan 3G Modem Support
- OpenWRT: Setup Firewall
- OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
- UBNT