UEC: Peritah-perintah Euca
Image Management
euca-bundle-image
Bundles an image for use with Eucalyptus or Amazon EC2.
euca-bundle-image -i, --image image_path -u, --user user [-c, --cert cert_path]
[-k, --privatekey private_key_path] [-p, --prefix prefix] [--kernel kernel_id]
[--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
[-d, --destination destination_path] [--ec2cert ec2cert_path]
[-r, --arch target_architecture] [--batch] [-h, --help] [--version] [--debug]
REQUIRED PARAMETERS
-i, --image Path to the image file to bundle.
-u, --user User ID (12-digit) of the user who is bundling the image.
OPTIONAL PARAMETERS
-c, --cert Path to the user's PEM encoded certificate.
-k, --privatekey Path to the user's PEM encoded private key.
-p, --prefix The prefix for the bundle image files. (default: image name).
--kernel The kernel to be associated with the bundled image.
--ramdisk The ramdisk to be associated with the bundled image.
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
--ec2cert The path to the Cloud's X509 public key certificate.
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
--batch Run in batch mode (compatibility only. has no effect).
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-bundle-vol
Bundle the local filesystem of a running instance as a bundled image.
euca-bundle-vol -u, --user user -s, --size size_in_MB
[-c, --cert cert_path] [-k, --privatekey private_key_path]
[-a, --all] [-e, --exclude dir1, dir2,...dirN] [-p, --prefix prefix] [--[no-]inherit] [-v, --volume volume_path] [--fstab fstab_path] [--generate-fstab] [--kernel kernel_id] [--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
[-d, --destination destination_path] [--ec2cert ec2cert_path] [-r, --arch target_architecture] [--batch] [--version]
REQUIRED PARAMETERS
-u, --user User ID (12-digit) of the user who is bundling the image.
-s, --size Size for the image in MB (default: 10GB or 10240MB).
OPTIONAL PARAMETERS
-c, --cert Path to the user's PEM encoded certificate.
-k, --privatekey Path to the user's PEM encoded private key.
-a, --all Bundle all directories (including mounted filesystems).
-p, --prefix The prefix for the bundle image files. (default: image name).
--[no-]inherit Add (or do not add) instance metadata to the bundled image. Inherit is set by default.
-e, --exclude comma-separated list of directories to exclude.
--kernel The kernel to be associated with the bundled image.
--ramdisk The ramdisk to be associated with the bundled image.
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
--ec2cert The path to the Cloud's X509 public key certificate.
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
-v, --volume Path to mounted volume to create the bundle from (default: "/").
--fstab Path to the fstab to be bundled into the image.
--generate-fstab Generate fstab to bundle into the image.
--batch Run in batch mode (compatibility only. has no effect).
euca-delete-bundle
Delete a previously uploaded bundle.
euca-delete-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-p, --prefix prefix] [--clear] [-h, --help] [--version] [--debug] REQUIRED PARAMETERS bucket The name of the bucket to delete from. OPTIONAL PARAMETERS -m, --manifest The path to the manifest file. -b, --bucket The bucket to delete the bundle from (if no manifest is specified, all images from this bucket will be deleted). -p, --prefix The filename prefix for bundled files. Defaults to image name. --clear Delete the bucket containing the image. -a, --access-key User's Access Key ID. -s, --secret-key User's Secret Key. -U, --url URL of the Cloud to connect to. --config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc). -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-download-bundle
Downloads a bundled image from a bucket.
euca-download-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-d, --directory directory] [-h, --help] [--version] [--debug] REQUIRED PARAMETERS -b, --bucket The name of the bucket to download from. OPTIONAL PARAMETERS -m, --manifest The path to the manifest file. -d, --directory The name of the directory to download the bundled parts to. -a, --access-key User's Access Key ID. -s, --secret-key User's Secret Key. -U, --url URL of the Cloud to connect to. --config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc). -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-unbundle
Unbundles a previously bundled image.
euca-unbundle-image -m, --manifest manifest_path [-k, --privatekey private_key_path] [-s, --source source_directory] [-d, --destination destination_directory] [-h, --help] [--version] [--debug] REQUIRED PARAMETERS -m, --manifest Path to the manifest file for the bundled image. OPTIONAL PARAMETERS -d, --destination Directory to store the image to (defaults to the current directory). -s, --source Source directory for the bundled image parts (defaults to manifest directory). -a, --access-key User's Access Key ID. -s, --secret-key User's Secret Key. -U, --url URL of the Cloud to connect to. --config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc). -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-upload-bundle
Upload a previously bundled image to the cloud.
euca-upload-bundle -b, --bucket bucket -m, --manifest manifest_path [-a, --access-key access_key_id]
[-s, --secret-key secret_key] [--acl canned_acl] [--ec2cert ec2cert_path] [-d, --directory bundle_path]
[--part part] [--url url] [--skipmanifest] [--debug] [-h, --help] [--version] REQUIRED PARAMETERS -b, --bucket The name of the bucket to upload to. Bucket will be created if it does not exist. -m, --manifest The path to the manifest file for the bundled image. OPTIONAL PARAMETERS --acl Canned access control policy (defaults to "aws-exec-read"). --ec2cert The path to the Cloud's X509 public key certificate. -d, --directory The directory containing the bundled image to upload (defaults to the manifest directory). --part Uploads specified part and all subsequent parts. --skipmanifest Do not upload the manifest file. -a, --access-key User's Access Key ID. -s, --secret-key User's Secret Key. -U, --url URL of the Cloud to connect to. --config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc). -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-describe-images
Shows information about machine images.
euca-describe-images [-a] [-o owner] [-x user] [-h, --help] [--version] [--debug] [image1 image2 ... imageN] OPTIONAL PARAMETERS image1 image2 ... imageN Images to describe. -a Show all images that the user has access to. -o Show only images owned by the owner specified are displayed. -x Show only images that the specified user is permitted to launch. -A, --access-key User's Access Key ID. -S, --secret-key User's Secret Key. -U, --url URL of the Cloud to connect to. --config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc). -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-describe-image-attribute
Show image attributes.
euca-describe-image-attribute [-l, --launch-permission] [-p, --product-code] [-B, --block-device-mapping] [--kernel] [--ramdisk] [-h, --help] [--version] [--debug] image_id REQUIRED PARAMETERS image_id unique identifier for the image that you want to retrieve the attributes for. OPTIONAL PARAMETERS -B, --block-device-mapping show block device mapping. -l, --launch-permission show launch permissions. -p, --product-code show the product codes associated with the image --kernel show the kernel id associated with the image. --ramdisk show the ramdisk id associated with the image. -a, --access-key user's Access Key ID. -s, --secret-key user's Secret Key. -U, --url URL of the Cloud to connect to. -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-register
Registers a manifest for use with the cloud.
euca-register [-h, --help] [--version] [--debug] image_location REQUIRED PARAMETERS image_location - path to the uploaded image (bucket/manifest). OPTIONAL PARAMETERS -a, --access-key user's Access Key ID. -s, --secret-key user's Secret Key. -U, --url URL of the Cloud to connect to. -h, --help Display this help message. --version Display the version of this tool. --debug Turn on debugging.
euca-deregister
Deregisters an image from the cloud.
euca-deregister [-h, --help] [--version] [--debug] image_id
REQUIRED PARAMETER
image_id unique identifier for the image to be deregistered.
OPTIONAL PARAMETER
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
Instance Management
euca-describe-instances
Shows information about instances.
euca-describe-instances [-h, --help] [--version] [--debug] [instance1... instanceN]
OPTIONAL PARAMETERS
instance1... instanceN instances to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-reboot-instances
Reboots specified instances.
euca-reboot-instances [-h, --help] [--version] [--debug] [instance1... instanceN]
OPTIONAL PARAMETERS
instance1... instanceN instances to reboot.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-run-instances
Starts instances.
euca-run-instances [-n, --instance-count count] [-g, --group group_name] [-k, --key keyname] [--addressing addressing] [-t, --instance-type instance_type] [-z, --availability-zone zone] [--kernel kernel_id] [--ramdisk ramdisk_id] [-h, --help] [--version] [--debug] image_id
REQUIRED PARAMETERS
image_id identifier for the image to run.
OPTIONAL PARAMETERS
-n, --instance-count Number of instances to run.
-g, --group Security group to run the instance under.
-k, --key Name of a (previously created) keypair to associate with this reservation.
-d, --user-data User data for instances read from the command line.
-f, --user-data-file User data for instances as a filename.
--addressing Addressing mode (e.g., private).
-t, --instance-type VM Image type to run the instance(s) as (default: m1.small).
-z, --availability-zone Availability zone to run the instance(s) in.
--kernel Id of the kernel to be used to launch instance(s).
--ramdisk Id of the ramdisk to be used to launch instance(s).
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-terminate-instances
Stops specified instances.
euca-terminate-instances [-h, --help] [--version] [--debug] [instance1... instanceN]
REQUIRED PARAMETERS
instance1... instanceN instances to terminate.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-confirm-product-instance
Confirm if instance is running with product code attached.
euca-confirm-product-instance i, --instance instance_id [-h, --help] [-version] [--debug] product_code
REQUIRED PARAMETERS
-i, --instance Unique identifier for a running instance.
product_code The product code to verify.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
Storage Management
euca-attach-volume
Attaches a volume to an instance.
euca-attach-volume -i, --instance instance_id -d, --device device [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
-i, --instance unique id of a running instance to attach the volume to.
-d, --device local device name (inside the guest VM) to use.
volume_id unique id for a volume to attach.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-create-volume
Creates a volume in a specified availability zone.
euca-create-volume -S, --size size | --snapshot snapshot_id -z zone [-h, --help] [--version] [--debug]
REQUIRED PARAMETERS
-s, --size size of the volume (in GiB).
--snapshot snapshot id to create the volume from. Either size or snapshot can be specified (not both).
-z, --zone availability zone to create the volume in
OPTIONAL PARAMETERS
-A, --access-key User's Access Key ID.
-S, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-delete-volume
Deletes a volume.
euca-delete-volume [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique identifier for the volume to be deleted.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-volumes
Shows information about volumes.
euca-describe-volumes [-h, --help] [--version] [--debug] [volume1 volume2...volumeN]
OPTIONAL PARAMETERS
volume1 volume2...volumeN volumes to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-detach-volume
Detaches a volume from an instance.
euca-detach-volume [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique id for a volume to detach.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-create-snapshot
Creates a snapshot from an existing volume.
euca-create-snapshot [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique id for a volume to snapshot.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-delete-snapshot
Deletes a snapshot.
euca-delete-snapshot [-h, --help] [--version] [--debug] snapshot_id
REQUIRED PARAMETERS
snapshot_id unique identifier for the snapshot to be deleted.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-snapshots
Shows information about snapshots.
euca-describe-snapshots [-h, --help] [--version] [--debug] [snapshot1 snapshot2...snapshotN]
OPTIONAL PARAMETERS
snapshot1 snapshot2...snapshotN - snapshots to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
Network Management
euca-allocate-address
Allocate a public IP address.
euca-allocate-address [-h, --help] [--version] [--debug]
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-associate-address
Associate an instance with a public IP address.
euca-associate-address -i, --instance instance_id [-h, --help] [--version] [--debug] ip
REQUIRED PARAMETERS
-i, --instance unique identifier for a running instance to associate the address with.
ip IP address to associate.
OPTIONAL PARAMETERS
-a, --access-key user's Access Key ID.
-s, --secret-key user's Secret Key.
-U, --url URL of the Cloud to connect to.
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-addresses
Shows information about addresses.
euca-describe-addresses [-h, --help] [--version] [--debug] [ip1 ip2...ipN]
OPTIONAL PARAMETERS
ip1 ip2...ipN IP addresses to display information about.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-disassociate-address
Disassociate a public IP address from an instance.
euca-disassociate-address [-h, --help] [--version] [--debug] ip
REQUIRED PARAMETERS
ip IP address to disassociate.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-release-address
Releases a public IP address.
euca-release-address [-h, --help] [--version] [--debug] ip
REQUIRED PARAMETERS
ip The public IP address to release.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
Security
euca-add-group
Creates a new security group.
euca-add-group -d, --description group_description [-h, --help] [--version] [--debug] group_name
REQUIRED PARAMETERS
-d, --description Description for the group to be created.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-delete-group
Deletes a security group.
euca-delete-group [-h, --help] [--version] [--debug] group_name
REQUIRED PARAMETER
group_name unique name for a group to delete.
OPTIONAL PARAMETER
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-groups
Shows information about groups.
euca-describe-groups [-h, --help] [--version] [--debug] [group1 group2...groupN]
OPTIONAL PARAMETERS
group1 group2...groupN groups to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-add-keypair
Creates a new key pair for use with instances.
euca-add-keypair [-h, --help] [--version] [--debug] keypair_name
REQUIRED PARAMETERS
keypair_name - unique name for a keypair to create.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-delete-keypair
Delete a key pair.
euca-delete-keypair [-h, --help] [--version] [--debug] keypair_name
REQUIRED PARAMETERS
keypair_name unique name for the keypair to delete.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-keypairs
Shows information about keypairs.
euca-describe-keypairs [-h, --help] [--version] [--debug] [keypair1 keypair2...keypairN]
OPTIONAL PARAMETERS
keypair1 keypair2...keypairN keypairs to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-availability-zones
Shows information about availability zones.
euca-describe-availability-zones [--region region] [-h, --help] [--version] [--debug] [zone1 zone2...zoneN] [verbose]
OPTIONAL PARAMETERS
--region region to describe availability zones for
zone1 zone2...zoneN zones to describe.
verbose show verbose resource information (Eucalyptus administrator-only functionality).
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-describe-regions
Shows information about regions.
euca-describe-regions [-h, --help] [--version] [--debug] [region1 region2...regionN]
OPTIONAL PARAMETERS
region1 region2...regionN regions to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-get-console-output
Prints console output from a running instance.
euca-get-console-output [-h, --help] [--version] [--debug] instance_id
REQUIRED PARAMETERS
instance_id unique identifier for the instance show the console output for.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-modify-image-attribute
Modify attributes for an image.
euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code] [-a, --add entity ] [-r, --remove entity] [-h, --help] [--version] [--debug] image_id
REQUIRED PARAMETERS
image_id Unique identifier for the image that you want to modify the attributes for.
OPTIONAL PARAMETERS
-l, --launch-permission Show launch permissions.
-p, --product-code Show the product codes associated with the image
-a, -add Entity (typically, user id) to add.
-r, --remove Entity (typically, user id) to remove.
-A, --access-key User's Access Key ID.
-S, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-reset-image-attribute
Reset attributes for an image.
euca-reset-image-attribute -l, --launch-permission [-h, --help] [--version] [--debug] image_id
REQUIRED PARAMETERS
-l, --launch-permission show launch permissions.
image_id - unique identifier for the image that you want to reset the attributes for.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-revoke
Revoke a rule for a security group.
euca-revoke [-P | --protocol protocol] [-p | --port-range port_range] [-t | --icmp-type-code type:code] [-o | --source-group source_group] [-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name
REQUIRED PARAMETERS
group_name Name of the group to add the rule to.
OPTIONAL PARAMETERS
-P, --protocol Protocol ("tcp" "udp" or "icmp").
-p, --port-range Range of ports for the rule (specified as "from-to").
-t, --icmp-type-code ICMP type and code specified as "type:code"
-o, --source-group Group from which traffic is authorized by the rule.
-u, --source-group-user User ID for the source group.
-s, --source-subnet The source subnet for the rule.
-A, --access-key User's Access Key ID.
-S, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
euca-version
Shows the Euca2ools version
euca-version [-h, --help] [--debug]
euca-authorize
Add a new rule to a security group.
euca-authorize [-P, --protocol protocol] [-p, --port-range port_range] [-t, --icmp-type-code type:code] [-o, --source-group source_group] [-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name
REQUIRED PARAMETERS
group_name Name of the group to add the rule to.
OPTIONAL PARAMETERS
-P, --protocol Protocol ("tcp" "udp" or "icmp").
-p, --port-range Range of ports for the rule (specified as "from-to").
-t, --icmp-type-code ICMP type and code specified as "type:code"
-o, --source-group Group from which traffic is authorized by the rule.
-u, --source-group-user User ID for the source group.
-s, --source-subnet The source subnet for the rule.
-A, --access-key User's Access Key ID.
-S, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.
Commands Available in UEC and not available in Eucalyptus installations
Uec-publish-tarball
Usage: uec-publish-tarball [ options ] tarfile bucket [arch]
register a UEC tarball (ie, per http://uec-images.ubuntu.com)
if arch is not provided, a name-based attempt is made to guess options:
-k | --kernel k use previously registered kernel with id 'k'
specify 'none' for no kernel
-K | --kernel-file f bundle, upload, use file 'f' as kernel
-r | --ramdisk r use previously registered ramdisk with id 'r'
specify 'none' for no ramdisk
-R | --ramdisk-file f bundle, upload, use file 'f' as ramdisk --resize s resize the image to 's' bundling uploading
's' must be valid input to uec-resize-image
-q | --quiet be quiet, only output published ids Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386
uec-registration
uec-registration [--manual|--auto|--help]
Options:
--manual Disable automatic component registration
--auto Enable automatic component registration
-h, --help This message
uec-run-instances
Same as euca-run-instances
uec-publish-image
Usage: uec-publish-image [ options ] arch image bucket
arch : one of i386 or x86_64
image : the image to upload and register
bucket : bucket to publish image to options:
l|-add-launch <user_id> : user_id can be "all", or "none"
--dry-run : only report what would be done
--allow-existing : if a image is already registered
simply report as if work was done
o|-output <file> : write registered id and manifest to file |--rename <publish_path> : publish to bucket/<publish_path>
default: bucket/<basename(image)>
t|-type <type> : type is one of kernel/ramdisk/image
v|-verbose : increase verbosity if type is 'image', then:
-k | --kernel k : use previously registered kernel with id 'k'
specify 'none' for no kernel
-K | --kernel-file f : bundle, upload, use file 'f' as kernel
-r | --ramdisk r : use previously registered ramdisk with id 'r'
specify 'none' for no ramdisk
-R | --ramdisk-file f : bundle, upload, use file 'f' as ramdisk
-B | --block-device-mapping m : specify block device mapping in bundle
uec-query-builds
Usage: uec-query-builds [options]
Options: -h, --help show this help message and exit --suite=SUITE suite to query ('hardy', 'karmic', 'lucid') --build-name=BUILD_NAME build name ('server', 'desktop' ..) --stream=STREAM stream query ('released', 'daily') --base-url=BASE_URL the base url to query --output=FILE write output to file, default is stdout --serial=SERIAL build serial serial to use (YYYYMMDD) --system-suite use output of 'lsb_release --codename --short' for suite --config=CONFIG yaml config file to read --region=REGION the ec2 region to query --img-type=TYPE the ec2 image type (one of: ebs, instance) --arch=ARCH the architecture. (one of: i386, amd64)
uec-resize-image
Usage: uec-query-builds [options]
Options: -h, --help show this help message and exit --suite=SUITE suite to query ('hardy', 'karmic', 'lucid') --build-name=BUILD_NAME build name ('server', 'desktop' ..) --stream=STREAM stream query ('released', 'daily') --base-url=BASE_URL the base url to query --output=FILE write output to file, default is stdout --serial=SERIAL build serial serial to use (YYYYMMDD) --system-suite use output of 'lsb_release --codename --short' for suite --config=CONFIG yaml config file to read --region=REGION the ec2 region to query --img-type=TYPE the ec2 image type (one of: ebs, instance) --arch=ARCH the architecture. (one of: i386, amd64) uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help Usage: uec-resize-image [ options ] image size [output] Resize a UEC image to a new size. if output is given, do not modify 'image', but create new file 'output'
New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte options:
-v | --verbose show command output
Referensi