Konfigurasi
bridge irb
!-- This command enables the IRB feature on this router.
interface Ethernet1/0
no ip address
no ip directed-broadcast
bridge-group 1
no shutdown
!-- The interface E1/0 is in bridge-group 1.
Interface Ethernet1/1
no ip address
no ip directed-broadcast
bridge-group 1
no shutdown
!-- The interface E1/1 is in bridge-group 1.
interface Ethernet1/2
no ip address
no ip directed-broadcast
bridge-group 1
no shutdown
!-- The interface E1/2 is in bridge-group 1.
interface FastEthernet 0/0
ip address 192.168.122.100 255.255.255.0
ip address 192.168.122.101 255.255.255.0 secondary
ip address 192.168.122.102 255.255.255.0 secondary
ip nat outside
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.122.1
ip nat pool no-overload 192.168.122.100 192.168.122.102 prefix 24
ip nat inside source list 7 pool no-overload
access-list 7 permit 10.10.10.0 0.0.0.255
!
interface BVI1
ip address 10.10.10.1 255.255.255.0
ip nat inside
!-- An ip address is assigned to the logical BVI for routing
!
!
bridge 1 protocol ieee
!-- This command enables the bridging on this router.
bridge 1 route ip
!-- This command enable bridging as well routing for IP protocol.
end
Pranala Menarik