GNURadio: UHD Image
Revision as of 08:46, 26 April 2012 by Onnowpurbo (talk | contribs)
Setiap USRP harus load spesial firmware dan FPGA image. Metoda untuk me-load image ke USRP berbeda tergantung device:
- USRP1: The host code will automatically load the firmware and FPGA at runtime.
- USRP2: The user must manually write the images onto the USRP2 SD card.
- USRP-N Series: The user must manually transfer the images over ethernet.
- USRP-E Series: The host code will automatically load the FPGA at runtime.
- USRP-B Series: The host code will automatically load the FPGA at runtime.
Pre-built Image
Pre-built imaage yang siap di download
- Master Branch images http://files.ettus.com/binaries/master_images/
- Maint Branch images http://files.ettus.com/binaries/maint_images/
- Next Branch images http://files.ettus.com/binaries/next_images/
See the UHD wiki for the download link.
The pre-built images come in two forms:
- bundled with UHD in a platform-specific installer
- stand-alone platform-independent archive files
Platform installers
Di UNIX-based di instalasi ke
/usr/share/uhd/images.
atau
/usr/local/share/uhd/images.
When installing images from an archive, there are two options:
Option 1:
Unpack the archive into the UHD installation prefix. UHD will always search <install-path>/share/uhd/images for image files. Where <install-path> was set by the CMAKE_INSTALL_PREFIX at configure-time.
Option 2:
Unpack the archive anywhere and set the UHD_IMAGES_PATH environment variable. UHD_IMAGES_PATH may contain a list of directories to search for image files.
Referensi
- http://files.ettus.com/uhd_docs/manual/html/images.html
- http://files.ettus.com/binaries/master_images/
Pranala Menarik
Persiapan
- USRP: High Precision Clock
- USRP: Menyambungkan ClockTamer ke USRP1
- USRP: Kalibrasi ClockTamer
- USRP: ClockTamer Control Protocol
- USRP: Instalasi Board
- OpenBTS: GIT Source Code
OpenBTS 2.6
- GNURadio
- GNURadio: Ubuntu Install
- GNURadio: Ubuntu Install GNURadio 3.4.2 *RECOMMENDED*
- GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz *RECOMMENDED*
- GNURadio: Contoh Aplikasi
- GNURadio: Spectrum Analizer GSM
- GNURadio: Mengubah board RFX1800 menjadi RFX900
- GNURadio: Programming Untuk Pemula
- OpenBTS: Ubuntu Install
- OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz
- OpenBTS: Konfigurasi
- OpenBTS: Kalibrasi
- OpenBTS: Konfigurasi Asterisk untuk OpenBTS
- OpenBTS: Menjalankan smqueue
- OpenBTS: Mengoperasikan BTS
- OpenBTS: Tampilan di Nokia saat pakai OpenBTS
- OpenBTS: Operasi 1800 MHz
- OpenBTS: Beberapa Tips
- OpenBTS: USRP2
- OpenBTS: Amplifier
- OpenBTS: SMS
- AirProbe
OpenBTS 2.8
- GNURadio: Ubuntu 11.10 Install NOT RECOMMENED
- GNURadio: Ubuntu 11.10 instalasi menggunakan Repo NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2
- GNURadio: Ubuntu 11.10 Install dari GIT GNURadio RECOMMENDED
- GNURadio: Ubuntu 11.10 cek USRP Daughter Board
- GNURadio: UHD
- GNURadio: UHD Image
- GNURadio: UHD Identifikasi Device
- OpenBTS: Ubuntu 11.10 Install
- OpenBTS: 2.8 dari SVN Install RECOMMENDED
- OpenBTS: 2.8 Instalasi Real Time Asterisk
- OpenBTS: 2.8 Konfigurasi
- OpenBTS: Database SQLite
Ettus E110
- OpenBTS: E110 Cara Login
- OpenBTS: E110 Install Image di MicroSD
- OpenBTS: E110 Cek Daughter Board
- OpenBTS: E110 Mengubah Master Clock
- OpenBTS: E110 Kalibrasi Clock
- OpenBTS: E110 Bekerja dengan opkg
- OpenBTS: E110 GNURadio
- OpenBTS: E110 Install UHD Image
- OpenBTS: E110 Instalasi OpenBTS
- OpenBTS: E110 Instalasi OpenBTS 2.6 NOT RECOMMENDED
Lain Lain
- OpenBTS: Materi Magang di ICTWATCH
- OpenBTS: Seminar Outline
- OpenBTS: Workshop Outline
- Membuat Base Station GSM Open Source
- Teknologi Selular
- GSM: Daftar Channel Frekuensi
- Wireless Internet
- OpenBSC
- AirProbe
- Base station subsystem
- GSM
- Asterisk
- Mobile phone
Catatan Legal dan Pendukung
- Siapa Bilang OpenBTS Ilegal?
- OpenBTS: Catatan MNC dan MCC Indonesia
- OpenBTS: Catatan MNC dan MCC COOL
- OpenBTS : Alokasi Frekuensi Operator GSM Indonesia
- GSM: Daftar Channel Frekuensi