Difference between revisions of "Cisco: Static Routing Sedehana"

From OnnoWiki
Jump to navigation Jump to search
Line 59: Line 59:
 
  ping 192.168.1.1
 
  ping 192.168.1.1
  
 
==Tambahan Kalau Membutuhkan NAT==
 
 
Menggunakan NAT untuk Memungkinkan Pengguna Internal Mengakses Internet
 
 
Jalankan langkah ini untuk memungkinkan pengguna internal anda mengakses Internet dan menyimpan alamat di kumpulan alamat global di dalam menggunakan kelebihan alamat global.
 
 
SUMMARY STEPS
 
 
enable
 
configure terminal
 
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
 
access-list access-list-number permit source [source-wildcard ]
 
ip nat inside source list access-list-number pool name overload
 
interface type number
 
ip address ip-address mask
 
ip nat inside
 
exit
 
interface type number
 
ip address ip-address mask
 
ip nat outside
 
end
 
 
R1:
 
 
enable
 
configure terminal
 
ip nat pool net-168.1 192.168.1.1 192.168.1.254 netmask 255.255.255.0
 
access-list 1 permit 192.168.1.0 0.0.0.255
 
ip nat inside source list 1 pool net-168.1 overload
 
interface ethernet1/3
 
! ip address 192.168.1.1 255.255.255.0
 
ip nat inside
 
exit
 
interface ethernet1/1
 
! ip address 10.10.0.1 255.255.255.0
 
! ip address dhcp
 
ip nat outside
 
end
 
 
 
 
===Referensi===
 
 
* https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat-addr-consv.html
 
  
 
==Setting Client==
 
==Setting Client==

Revision as of 15:03, 23 December 2018

SR1.png


R1:

Ethernet1/1 - ke Internet
Ethernet1/2 - R2: Ethernet 1/1
Ethernet1/3 - LAN

R2:

Ethernet1/1 - R1: Ethernet1/2
Ethernet1/2 - LAN


R1:

enable
configure terminal
  interface ethernet1/1
    ip address dhcp
    ip dhcp client request
    no shutdown
    exit
  interface ethernet1/2
    ip address 172.16.1.1 255.255.255.252
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    exit
  ip route 192.168.2.0 255.255.255.0 172.16.1.2
  exit
copy running-config startup-config

R2:

enable
config terminal
   interface ethernet1/1
    ip address 172.16.1.2 255.255.255.252
    no shutdown
    exit
  interface ethernet1/2
    ip address 192.168.2.1 255.255.255.0
    exit
  ip route 192.168.1.0 255.255.255.0 172.16.1.1
  ip route 0.0.0.0 0.0.0.0 172.16.1.1
  exit
copy running-config startup-config


Test

R1:

ping 192.168.2.1

R2:

ping 192.168.1.1


Setting Client

LAN 1 Client:

ip 192.168.1.2
gw 192.168.1.1


LAN 2 Client:

ip 192.168.2.2
gw 192.168.2.1


Pranala Menarik