Difference between revisions of "OpenWRT: Build Firmware Linksys E1700"

Revision as of 08:15, 20 January 2015

Spesifikasi

Model : E1700
Platform : Mediatek MT7620A
RAM [MB] : 32
Flash [MB] : 8
Ant. Conn. Type : External
WLAN NIC : SOC
WLAN standard [802.11] : b/g/n 2x2:2
Eth. port count : 4 Gb LAN 1 Gb WAN
Power Input [V/A] 12V 0.5A

Siapkan Aplikasi Pendukung

sudo su
apt-get update
apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \
fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \
libexpat1 libexpat1-dev libssl-dev libdaemon*

cd /usr/local/src
wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.43.tar.gz
tar zxvf XML-Parser-2.43.tar.gz
cd /usr/local/src/XML-Parser-2.43
perl Makefile.PL
make install

Compile Menggunakan Development Trunk

Development Trunk tampaknya paling RECOMMENDED

Lakukan sebagai user biasa

svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
cd ~/openwrt.trunk/trunk/
./scripts/feeds update
./scripts/feeds install meshwizard openssh-server openssh-client
./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate
./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services
./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk
./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw
./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw
./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo
./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf
./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna
./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11 coova-chilli
./scripts/feeds update -a
./scripts/feeds install -a
make clean
make defconfig
make menuconfig
make world

Hasilnya akan berada di folder

~/openwrt.trunk/trunk/bin/ramips/

Konfigurasi Default

Konfigurasi untuk E1700

Target System (Ralink RT288x/RT3xxx) --->
Subtarget (MT7620 based boards) --->
Target Profile (Linksys E1700) --->

Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita dapat menambahkan paling tidak

Luci
Asterisk (supaya keren)
Samba (supaya keren)
UPnP (supaya keren)

Administration  ---> 
      <*> asterisk11-gui
Kernel modules  --->
      -*- kmod-ipv6
      -*- kmod-sched
      -*- kmod-sched-core
LuCI  --->
      1. Collections
             -*- luci
             <*> luci-ssl
      3. Applications
             <*> luci-app-ahcp
             -*- luci-app-firewall
             <*> luci-app-radvd
             <*> luci-app-samba
             <*> luci-app-upnp
             <*> luci-app-wshaper
      4. Themes
             -*- luci-theme-bootstrap
             <*> luci-theme-freifunk-bno
             <*> luci-theme-freifunk-generic
             <*> luci-theme-openwrt
      5. Protocols
             <*> luci-proto-ipv6
             -*- luci-proto-ppp
Network  --->
      Telephony  --->
             -*- asterisk11
      -*- hostapd-common
      -*- iw
      -*- samba36-server
      <*> wpad-mini
      -*- wshaper

Setelah selesai, kita perlu compile

cd ~/openwrt.trunk/trunk
make clean
make defconfig
make world

Setelah jadi, kita perlu menambahkan driver wifi dan compile ulang secara manual berikut ini.

Cara Menambahkan Driver Wifi

Download patch

cd ~
rm -Rf ~/rt2860v2-for-openwrt-mt7620/
git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git

Merge ke build directory

cd ~
cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/

cd ~
cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/

Hati-hati folder

/linux-ramips_mt7620/linux-3.14.26
/linux-ramips_mt7620/linux-3.14.27 
/linux-ramips_mt7620/linux-3.14.28

mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.

Tambahkan di Kconfig dan Makefile

Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD

vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/Kconfig

source "drivers/mtd/ralink/Kconfig"
endif # MTD

Tambahkan kalimat berikut di akhir file makefile:

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/mtd/Makefile

obj-$(CONFIG_MTD_RALINK)    += ralink/

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/Kconfig

source "drivers/net/wireless/rt2860v2_ap/Kconfig"
endif # WLAN

Tambahkan kalimat berikut di akhir file makefile:

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.14.28/drivers/net/wireless/Makefile

obj-$(CONFIG_RT2860V2_AP)   += rt2860v2_ap/

Tambahkan konfigurasi

Jalankan

cd ~/openwrt.trunk/trunk
make kernel_menuconfig

Masukan konfigurasi berikut

Machine selection  --->  
     System type (Ralink based machines)  --->
     Ralink SoC selection (MT7620/8)  --->
     Devicetree selection (None)  --->

Device Driver -->
      <*> Memory Technology Device (MTD) support  --->
             Ralink Flash Type support  --->
                   [*] Ralink MTD support  

Device Driver -->
      [*] Network device support  --->
             [*]   Wireless LAN  ---> 
                     <*>   Ralink RT2860 802.11n AP support
                     [*]     LED Support
                     [ ]     WSC (WiFi Simple Config)
                     [*]     LLTD (Link Layer Topology Discovery Protocol)
                     [*]     WDS
                     [*]     MBSSID
                     [*]       New MBSSID MODE
                     [*]     AP-CLient Support
                     [*]       MAC Repeater Support
                     [ ]     IGMP snooping (NEW)
                     [ ]     NETIF Block (NEW)
                     [ ]     DFS (NEW)
                     [*]     Carrier Detect
                     [ ]     DLS ((Direct-Link Setup) Support (NEW)
                     [ ]     IDS (Intrusion Detection System) Support (NEW)
                     [*]     CoC Support (NEW)
                     [ ]     Memory Optimization (NEW)
                     [ ]     Video Turbine support (NEW)
                     [ ]     802.11n Draft3 (NEW)
                     [ ]     Adjust Power Consumption Support (NEW
                     [ ]     Single SKU (NEW)
                     Choose Power Design (Internal PA and Internal LNA)  --->
                     [ ]   TSSI Compensation (NEW)
                     [ ]   Temperature Compensation (NEW)

Pastikan pilih (*) untuk membuat driver masuk ke kernel, bukan kernel module.

Buat lagi firmware

Ulangi lagi pembuatan firmware. Tapi

JANGAN LAKUKAN make clean

cd ~/openwrt.trunk/trunk/
make world

Hasilnya ada di folder

~/openwrt.trunk/trunk/bin/ramips

openwrt-ramips-mt7620-e1700-squashfs-factory.bin
openwrt-ramips-mt7620-e1700-squashfs-sysupgrade.bin
openwrt-ramips-mt7620-root.squashfs
openwrt-ramips-mt7620-uImage.bin
openwrt-ramips-mt7620-vmlinux.bin
openwrt-ramips-mt7620-vmlinux.elf

Flash Linksys E1700

Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,

Masuk ke web
Masuk ke menu system
Masuk ke menu firmware upgrade
Pilih file .bin berikut

openwrt-ramips-mt7620-e1700-squashfs-factory.bin

Flash, jangan sampai listrik mati & sambungan LAN putus.

Device ra0 akan muncul

ifconfig ra0

atau

ifconfig wlan0

Kita tidak bisa mengkonfigurasi

ifconfig ra0 up.

atau

ifconfig wlan0 up

Karena kita tidak memiliki file

/etc/Wireless/RT2860/RT2860.dat

Atau symbol link ke /tmp/RT2860.dat.

File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file

RT2860.dat

Masukan di

/etc/Wireless/RT2860/RT2860.dat
/tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Cara Membuat / Mengambil file RT2860.dat

Cara paling gampang. Download yang sudah jadi

wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat

Cara yang lebih susah. Ambil file rt2860v2.sh dari

https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh

Untuk MAC address WLAN bisa di set menggunakan file

/etc/config/wireless

dengan parameter

macaddr '1a:1a:1a:1a:1a:1a'

atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah

hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'

Setelah kita mempunyai file

RT2860.dat