Difference between revisions of "OpenWRT: Build Firmware Linksys E1700"
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 96: | Line 96: | ||
==Cara Menambahkan Driver Wifi== | ==Cara Menambahkan Driver Wifi== | ||
| − | + | Download patch | |
cd ~ | cd ~ | ||
git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git | git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git | ||
| + | |||
| + | Merge ke build directory | ||
cd ~ | cd ~ | ||
Revision as of 10:17, 11 January 2015
Spesifikasi
Model : E1700 Platform : Mediatek MT7620A RAM [MB] : 32 Flash [MB] : 8 Ant. Conn. Type : External WLAN NIC : SOC WLAN standard [802.11] : b/g/n 2x2:2 Eth. port count : 4 Gb LAN 1 Gb WAN Power Input [V/A] 12V 0.5A
Siapkan Aplikasi Pendukung
sudo su apt-get update apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \ fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \ libexpat1 libexpat1-dev libssl-dev libdaemon*
cd /usr/local/src wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.43.tar.gz tar zxvf XML-Parser-2.43.tar.gz cd /usr/local/src/XML-Parser-2.43 perl Makefile.PL make install
Compile Menggunakan Development Trunk
Development Trunk tampaknya paling RECOMMENDED
Lakukan sebagai user biasa
svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk cd ~/openwrt.trunk/trunk/ ./scripts/feeds update ./scripts/feeds install meshwizard openssh-server openssh-client ./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate ./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services ./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk ./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw ./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw ./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo ./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf ./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna ./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent ./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan ./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11 ./scripts/feeds update -a ./scripts/feeds install -a make clean make defconfig make menuconfig make world
Hasilnya akan berada di folder
~/openwrt.trunk/trunk/bin/ramips/
Konfigurasi Default
Konfigurasi untuk E1700
Target System (Ralink RT288x/RT3xxx) ---> Subtarget (MT7620 based boards) ---> Target Profile (Linksys E1700) --->
Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita perlu menambahkannya secara manual berikut ini.
Select the following configuration------
rt2860v2-for-openwrt-mt7620
rt2860v2_ap/rt2860v2_sta driver for openwrt trunk(3.10.x kernel) on MT7620 SOC. (Test on mt7620n 16m flash + 64M ram)
Target System: (Ralink 288x/3xxx) Subtarget: (MT7620N based boards)
$make V=99
Wait make command to be done.
When make finished. The firmware will be in the directory: $HOME/openwrt/openwrt-trunk/bin/ramips/
Cara Menambahkan Driver Wifi
Download patch
cd ~ git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git
Merge ke build directory
cd ~ cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/
cd ~ cp -r rt2860v2-for-openwrt-mt7620/rt2860v2 rt2860v2-for-openwrt-mt7620/rt2860v2_ap ~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/
After copied the driver code to the building kernel tree. Then, Let's to add Kconfig and Makefile objs in each directory of "mtd" and "wireless".
Add the following line before the end of Kconfig file:~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/Kconfig
source "drivers/mtd/ralink/Kconfig"
Add the following line before the end of makefile:~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/Makefile
obj-$(CONFIG_MTD_RALINK) += ralink/
Add the following line before the end of Kconfig file: ~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/Kconfig
source "drivers/net/wireless/rt2860v2_ap/Kconfig"
Add the following line before the end of makefile: ~/openwrt/openwrt-trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/Makefile
obj-$(CONFIG_RT2860V2_AP) += rt2860v2_ap/
4. Okey, Driver Code Configuration Finished.
Go back to the ~/openwrt/openwrt-trunk directory. And run the shell command:
$make kernel_menuconfig
Enter this menu:
A:
Device Driver -->
<\*> Memory Technology Device (MTD) support
---> Ralink Flash Type support
---> [\*] Ralink MTD support
B:
Device Driver
--> [\*] Network device support
---> [\*] Wireless LAN
---><\*> Ralink RT2860 802.11n AP support
[\*] LED Support
[ ] WSC (WiFi Simple Config)
[\*] LLTD (Link Layer Topology Discovery Protocol)
[\*] WDS
[\*] MBSSID
[\*] New MBSSID MODE
[\*] AP-CLient Support
[\*] MAC Repeater Support
[ ] IGMP snooping
[ ] NETIF Block
[ ] DFS
[\*] Carrier Detect
[ ] DLS ((Direct-Link Setup) Support
[ ] IDS (Intrusion Detection System) Support
[\*] CoC Support
[ ] Memory Optimization
[ ] Video Turbine support
[ ] 802.11n Draft3
[ ] Adjust Power Consumption Support
[ ] Single SKU
Choose Power Design (Internal PA and Internal LNA) --->
[ ] TSSI Compensation
[ ] Temperature Compensation
We select "*" to building the driver into the kernel, not a kernel module.
After selecting the configration. save and exit menuconfig. 5.Now. Just Hit "Make V=99" to build.
we have added and configured the wifi driver code to the kernel build tree.
just type the make V=99 command in directory:~/openwrt/openwrt-trunk ,
$make V=99
And wait for some minutes to be builded. 6. After builded, burn the new firmware with wifi driver.
You will found out that, wifi device ra0 will be appeared.
test with:
ifconfig ra0
But your cann't successfully ifconfig ra0 up.
Because we lack the /etc/Wireless/RT2860/RT2860.dat file(or symbol link to /tmp/RT2860.dat),
Which generated by an scripts file in /lib/wifi directory which first introduced by lintel.
7. Enjoy DIY with your hands.
I will not provide the dat file or script file. you need to scratch up those file by yourself.
Last commit, I havn't shared the script file.
This Time, I shared the script file named: rt2860v2.sh.
I fixed the wrong default mac address problem via shell command in this script file, you know, it's not the best, but works well.
Your can define your perefered mac addres in /etc/config/wireless file with option macaddr '1a:1a:1a:1a:1a:1a';
Or you can read out the factory default mac address in eeprom, using this shell:
hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'
substitute and eval this shell in the appropriate place in rt2860v2.sh file. you can get everything automatically. Where is the best and perfect firmware? I will not to Share out any more. Dive into the code and fix it by yourself, it's so easy. 8. Say thanks to me as much as you can.
sorry for these Chinglish, wish you can read it.
Then, you can download and burn the new firmware to the mt7620 SOC Board via TFTP in the uboot stage.
Lebih Lanjut
- file rt2860v2.sh