Difference between revisions of "TCP/IP: Quagga Statik Routing"
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 17: | Line 17: | ||
| − | + | ==Konfigurasi== | |
| − | + | Kita perlu menset sistem Linux secara benar agar Quagga dapat berjalan dengan baik. | |
| − | |||
| − | |||
| − | |||
| − | + | ==Konfigurasi Linux== | |
| + | |||
| + | Cek bahwa daemon zebra dapat di aktifkan: | ||
| + | |||
| + | vim /etc/quagga/daemons | ||
| + | |||
| + | isinya | ||
zebra=yes | zebra=yes | ||
| Line 35: | Line 38: | ||
isisd=no | isisd=no | ||
| − | + | Jika kita mengubah file daemons, kita perlu me-restart layanan Quagga menggunakan perintah: | |
| − | + | vim /etc/init.d/quagga restart | |
Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). | Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). | ||
| Line 45: | Line 48: | ||
Starting Quagga daemons (prio:10): zebra. | Starting Quagga daemons (prio:10): zebra. | ||
| − | + | Kita dapat menset hostname Quagga_A di file /etc/quagga/vtysh.conf: | |
| − | + | vim /etc/quagga/vtysh.conf | |
! | ! | ||
| Line 57: | Line 60: | ||
! | ! | ||
| − | + | Di komputer yang lain, kita dapat menset hostname Quagga_B di file /etc/quagga/vtysh.conf | |
| − | + | vim /etc/quagga/vtysh.conf | |
! | ! | ||
| Line 69: | Line 72: | ||
! | ! | ||
| − | + | Jangan lupa untuk mengaktifkan ip forwarding di router Quagga A | |
It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface. | It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface. | ||
Revision as of 11:31, 13 November 2013
quagga cisco 2651 3750 static routing Functionalities tested:
Interface settings Static routes Telnet access
Konfigurasi
Kita perlu menset sistem Linux secara benar agar Quagga dapat berjalan dengan baik.
Konfigurasi Linux
Cek bahwa daemon zebra dapat di aktifkan:
vim /etc/quagga/daemons
isinya
zebra=yes bgpd=no ospfd=no ospf6d=no ripd=no ripngd=no isisd=no
Jika kita mengubah file daemons, kita perlu me-restart layanan Quagga menggunakan perintah:
vim /etc/init.d/quagga restart
Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). Removing all routes made by zebra. Nothing to flush. Loading capability module if not yet done. Starting Quagga daemons (prio:10): zebra.
Kita dapat menset hostname Quagga_A di file /etc/quagga/vtysh.conf:
vim /etc/quagga/vtysh.conf
! ! Sample ! ! service integrated-vtysh-config hostname Quagga_A username root nopassword !
Di komputer yang lain, kita dapat menset hostname Quagga_B di file /etc/quagga/vtysh.conf
vim /etc/quagga/vtysh.conf
! ! Sample ! ! service integrated-vtysh-config hostname Quagga_B username root nopassword !
Jangan lupa untuk mengaktifkan ip forwarding di router Quagga A It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface.
ROUTERS CONFIGURATIONS
CISCO ROUTER 2651 IOS: 12.2-23a QUAGGA ROUTER A 0.99.6 interface FastEthernet0/1
ip address 10.1.3.2 255.255.255.0 no shutdown interface eth0 ip address 10.1.3.1/24 link-detect
interface FastEthernet0/0
ip address 10.1.4.2 255.255.255.0 no shutdown interface eth1 ip address 10.1.1.1/24 link-detect
hostname Cisco-2651 ip route 10.1.0.0 255.255.0.0 10.1.3.1 ip route 10.200.1.4 255.255.255.255 10.1.4.1 ip route 10.200.1.1 255.255.255.255 10.1.3.1 ip route 10.1.0.0/16 10.1.3.2 ip route 10.200.1.4/32 10.1.3.2 ip route 10.200.1.1/32 10.1.1.2 line vty 0 4
no login
line vty
no login
enable secret password enable password password
CISCO SWITCH L3 3750 IOS: 12.2-25.SEE2 QUAGGA ROUTER B 0.99.6 interface vlan 1
ip address 10.1.1.2 255.255.255.0 no shutdown interface eth0 ip address 10.1.4.1/24 link-detect
interface Loopback 1
ip address 10.200.1.1 255.255.255.255 interface lo ip address 10.200.1.4/32 link-detect
hostname 3750_L3 hostname quagga-router-b ip route 0.0.0.0 0.0.0.0 10.1.1.1 ip route 0.0.0.0/0 10.1.4.2 line vty 0 4
no login
line vty 0 4
no login
enable secret password
enable password password
ip routing ip multicast-routing distributed