Difference between revisions of "GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2"

From OnnoWiki
Jump to navigation Jump to search
Line 190: Line 190:
 
* [[GNURadio]]
 
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
−
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]]
+
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''*RECOMMENDED*'''
 
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
Line 216: Line 216:
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]]
 
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]]
 
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]]
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
Line 231: Line 232:
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Install UHD Image]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] '''*NOT RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] '''*NOT RECOMMENDED*'''
Line 236: Line 238:
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]

Revision as of 16:57, 1 April 2012

Handling USRP

Ubuntu menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke USRP. Script berikut akan memberikan akses bagi user untuk menghandel USRP via USB baik secara live atau hot-plug. 

sudo addgroup usrp
sudo usermod -G usrp -a <YOUR_USERNAME>
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
sudo chown root.root tmpfile
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules

Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi USRP di USB tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot komputer. 

sudo udevadm control --reload-rules

atau 

sudo /etc/init.d/udev stop
sudo /etc/init.d/udev start

atau 

sudo killall -HUP udevd

Kita dapat mencek jika USRP telah di kenali dengan mengamati /dev/bus/usb setelah USRP di pasang menggunakan perintah 

ls -lR /dev/bus/usb | grep usrp

Harusnya akan keluar seperti 

crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002


Setiap USRP yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.


Instal Library

Update 

sudo apt-get update

Instal untuk Ubuntu 11.10 

sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig \
g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
asterisk asterisk-mysql

Instal SWIG

Install secara manual SWIG 

Download dari http://sourceforge.net/projects/swig/files/swig/
cp swig-2.0.4.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf swig-2.0.4.tar.gz 
cd /usr/local/src/swig-2.0.4/
./configure
make
make install

Instal QWT

Install secara manual QWT 

Download dari http://sourceforge.net/projects/qwt/files/
cp qwt-6.0.1.tar.bz2 /usr/local/src/
cd /usr/local/src/
tar jxvf qwt-6.0.1.tar.bz2 
cd /usr/local/src/qwt-6.0.1/
qmake
make
make install


Install GNURadio

Sebaiknya pada saat melakukan instalasi GNURadio, kita pasang USRP ke USB port-nya.

Download aplikasi GNURadio dari 

http://gnuradio.org/redmine/attachments/download/261/gnuradio-3.4.1.tar.gz
http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz

Install GNURadio 

cp gnuradio-3.4.2.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf gnuradio-3.4.2.tar.gz 
cd /usr/local/src/gnuradio-3.4.2/
./bootstrap
./configure --disable-usrp2 --enable-usrp
make clean
make all
make
make check
make install
sudo ldconfig

Edit bashrc

Masukan PYTHONPATH dengan cara mengedit 

vi ~/.bashrc

Tambahkan 

PYTHONPATH=/usr/local/lib/python2.7/dist-packages
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Untuk memastikan ada baiknya lakukan 

sudo ldconfig
export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/


Test

Lakukan 

/usr/local/src/gnuradio-3.4.2/gnuradio-examples/python/usrp
./usrp_benchmark_usb.py

Hasilnya 

Testing 2MB/sec... usb_throughput = 2M
ntotal    = 1000000
nright    = 998137
runlength = 998137
delta     = 1863
OK
Testing 4MB/sec... usb_throughput = 4M
ntotal    = 2000000
nright    = 1998117
runlength = 1998117
delta     = 1883
OK
Testing 8MB/sec... usb_throughput = 8M
ntotal    = 4000000
nright    = 3998437
runlength = 3998437
delta     = 1563
OK
Testing 16MB/sec... usb_throughput = 16M
ntotal    = 8000000
nright    = 7998859
runlength = 7998859
delta     = 1141
OK
Testing 32MB/sec... usb_throughput = 32M
ntotal    = 16000000
nright    = 15996766
runlength = 15996766
delta     = 3234
OK
Max USB/USRP throughput = 32MB/sec

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Ettus E110

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=GNURadio:_Ubuntu_11.10_Instal_GNURadio_3.4.2&oldid=31381"