Difference between revisions of "Cisco: Static Routing Sedehana"

From OnnoWiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 17: Line 17:
 
  configure terminal
 
  configure terminal
 
   interface ethernet1/1
 
   interface ethernet1/1
    ! ip address 10.1.1.2 255.255.255.0
 
 
     ip address dhcp
 
     ip address dhcp
 +
    ip dhcp client request
 
     no shutdown
 
     no shutdown
 
     exit
 
     exit
Line 47: Line 47:
 
   exit
 
   exit
 
  copy running-config startup-config
 
  copy running-config startup-config
 
==Request DHCP==
 
 
enable
 
config terminal
 
  interface ethernet1/1
 
    ip dhcp client request
 
    exit
 
  exit
 
  
  
Line 68: Line 59:
 
  ping 192.168.1.1
 
  ping 192.168.1.1
  
 
==Tambahan Kalau Membutuhkan NAT==
 
 
Menggunakan NAT untuk Memungkinkan Pengguna Internal Mengakses Internet
 
 
Jalankan langkah ini untuk memungkinkan pengguna internal anda mengakses Internet dan menyimpan alamat di kumpulan alamat global di dalam menggunakan kelebihan alamat global.
 
 
SUMMARY STEPS
 
 
enable
 
configure terminal
 
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
 
access-list access-list-number permit source [source-wildcard ]
 
ip nat inside source list access-list-number pool name overload
 
interface type number
 
ip address ip-address mask
 
ip nat inside
 
exit
 
interface type number
 
ip address ip-address mask
 
ip nat outside
 
end
 
 
R1:
 
 
enable
 
configure terminal
 
ip nat pool net-168.1 192.168.1.1 192.168.1.254 netmask 255.255.255.0
 
access-list 1 permit 192.168.1.0 0.0.0.255
 
ip nat inside source list 1 pool net-168.1 overload
 
interface ethernet1/3
 
! ip address 192.168.1.1 255.255.255.0
 
ip nat inside
 
exit
 
interface ethernet1/1
 
! ip address 10.10.0.1 255.255.255.0
 
! ip address dhcp
 
ip nat outside
 
end
 
 
 
 
===Referensi===
 
 
* https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat-addr-consv.html
 
  
 
==Setting Client==
 
==Setting Client==
Line 131: Line 77:
 
==Pranala Menarik==
 
==Pranala Menarik==
  
 +
* [[TCP/IP: Advanced Routing]]
 +
* [[Quagga]]
 +
* [[Mikrotik]]
 
* [[Cisco]]
 
* [[Cisco]]
* [[Cisco: NAT]]
+
* [[Juniper]]
 +
* [[BIRD: Routing]]
 +
* [[IPv6]]
 +
 
 +
 
 +
* [[TCP/IP: Advanced Routing]]
 +
* [[IPv6: Advanced Routing]]
 +
* [[IPv6: Quagga]]
 +
* [[IPv6: Mikrotik]]
 +
* [[IPv6: Cisco]]
 +
* [[IPv6: Juniper]]
 +
* [[IPv6: BIRD: Routing]]
 +
* [[IPv6]]

Latest revision as of 10:09, 5 January 2019

SR1.png


R1:

Ethernet1/1 - ke Internet
Ethernet1/2 - R2: Ethernet 1/1
Ethernet1/3 - LAN

R2:

Ethernet1/1 - R1: Ethernet1/2
Ethernet1/2 - LAN


R1:

enable
configure terminal
  interface ethernet1/1
    ip address dhcp
    ip dhcp client request
    no shutdown
    exit
  interface ethernet1/2
    ip address 172.16.1.1 255.255.255.252
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    exit
  ip route 192.168.2.0 255.255.255.0 172.16.1.2
  exit
copy running-config startup-config

R2:

enable
config terminal
   interface ethernet1/1
    ip address 172.16.1.2 255.255.255.252
    no shutdown
    exit
  interface ethernet1/2
    ip address 192.168.2.1 255.255.255.0
    exit
  ip route 192.168.1.0 255.255.255.0 172.16.1.1
  ip route 0.0.0.0 0.0.0.0 172.16.1.1
  exit
copy running-config startup-config


Test

R1:

ping 192.168.2.1

R2:

ping 192.168.1.1


Setting Client

LAN 1 Client:

ip 192.168.1.2
gw 192.168.1.1


LAN 2 Client:

ip 192.168.2.2
gw 192.168.2.1


Pranala Menarik