Difference between revisions of "OpenBTS: N210 Yate Config Test"

From OnnoWiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 117: Line 117:
 
* [[USRP: Kalibrasi ClockTamer]]
 
* [[USRP: Kalibrasi ClockTamer]]
 
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: ClockTamer Control Protocol]]
 +
* [[USRP: ClockTamer Flashing]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 
* [[OpenBTS: GIT Source Code]]
 
* [[OpenBTS: GIT Source Code]]
Line 122: Line 123:
 
* [[OpenBTS: Tethr untuk Bencana Alam]]
 
* [[OpenBTS: Tethr untuk Bencana Alam]]
 
* [[USRP: Tip Pemesanan]]
 
* [[USRP: Tip Pemesanan]]
 +
 +
===Script===
 +
 +
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
Line 180: Line 188:
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
Line 189: Line 198:
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Konfigurasi]]
 
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]]
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: Set SQLite parameter smqueue]]
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Multi OpenBTS 2.8===
 
===Multi OpenBTS 2.8===
Line 196: Line 209:
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
 +
* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
 +
* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
 +
* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
 +
* [[Multi OpenBTS: Catatan BCCH]]
 +
* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
  
 
===Ettus E110===
 
===Ettus E110===
Line 204: Line 230:
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 +
* [[OpenBTS: E110 Konfigurasi Jaringan]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 Instalasi iptables]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
−
* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 Compile UHD]] ''Not Recommended''
−
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended''
−
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended''
 +
* [[OpenBTS: E110 Install UHD Image]] ''Not Recommended''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Yate Softswitch]]
  
 
===Ettus N210===
 
===Ettus N210===
  
 +
* [[OpenBTS: N210 Instalasi GPSDO Kit]]
 
* [[OpenBTS: N210 GNURadio]]
 
* [[OpenBTS: N210 GNURadio]]
 +
* [[OpenBTS: N210 GNURadio 3.7.0]]
 
* [[OpenBTS: N210 Instalasi OpenBTS]]
 
* [[OpenBTS: N210 Instalasi OpenBTS]]
 
* [[OpenBTS: N210 Instalasi Yate]]
 
* [[OpenBTS: N210 Instalasi Yate]]
 
* [[OpenBTS: N210 Yate Config Test]]
 
* [[OpenBTS: N210 Yate Config Test]]
 
* [[OpenBTS: N210 Burn Firmware]]
 
* [[OpenBTS: N210 Burn Firmware]]
 +
 +
===RangeNetworks===
 +
 +
* [[OpenBTS: RangeNetwork Foto]]
 +
* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
 +
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Instalasi UHD]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[OpenBTS: RangeNetwork Audit]]
 +
* [[VoIP: Trunk]]
  
 
===GPRS===
 
===GPRS===
  
 
* [[OpenBTS: GPRS]]
 
* [[OpenBTS: GPRS]]
 +
* [[OpenBTS: GPRS Konfigurasi]]
 +
* [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]]
 +
 +
===Briker OpenBTS===
 +
 +
* [[OpenBTS: Briker]]
 +
 +
===FreeSWITCH OpenBTS===
 +
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Power Amplifier===
 
===Power Amplifier===
Line 263: Line 321:
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
  
 
===Dokumentasi Video===
 
===Dokumentasi Video===
Line 273: Line 332:
 
* http://youtu.be/6LCuoeI57ak (5/6)
 
* http://youtu.be/6LCuoeI57ak (5/6)
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 +
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 +
 +
===Perjuangan OpenBTS===
 +
 +
* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 +
 +
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 20:15, 10 March 2014

Konfigurasi untuk percobaan

regfile.conf

Edit 

vi /usr/local/etc/yate/regfile.conf

Isi dengan 

[2030]
password=123456
caller=2030

[2031]
password=123456
caller=2031

[2032]
password=123456
caller=2032

regexroute.conf

Edit 

vi /usr/local/etc/yate/regexroute.conf

Isi dengan 

[default]

; untuk call ke cell & pstn
${rtp_forward}^yes$^=;formats=${oformats}
^08.*$=sip/sip:\0@192.168.0.6:5060
^021.*$=sip/sip:\0@192.168.0.6:5060

atau 

${rtp_forward}^yes$^=;formats=${oformats}
^08.*$=sip/sip:\0@192.168.0.5:5061
^021.*$=sip/sip:\0@192.168.0.5:5061



; terakhir, semua telepon di approve supaya tidak Unauthorized
${rtp_forward}^yes$^=;formats=${oformats}
.*=return true


regexroute.conf langsung untuk IMSI

Ini bisa di tambahkan langsung untuk debugging 

^9999$=sip/IMSI510555550000000@127.0.0.1:5062
^1111$=sip/IMSI510218560072911@127.0.0.1:5062
^1112$=sip/IMSI510218560072911@127.0.0.1:5062

Beberapa Teknik Debugging

Selalu lihat

  • /var/log/yate
  • /tmp/VBTS.log

Buat trap pada regexroute.conf 

.*=tone/milliwatt


Beberapa Teknik Routing Outgoing call yang GAGAL TOTAL

Teknik ini Gagal & jangan digunakan 

^08\(.*\)$=sip/sip:2032@192.168.0.5:5061/08\1;tonedetect_out=yes
^08.*$=sip/sip:2032@192.168.0.5:5061/\0

^021.*$=sip/sip:2032@192.168.0.5:5061/\0
^021\(.*\)$=sip/sip:2032@192.168.0.5:5061/021\1;tonedetect_out=yes

tonedetect_out=yes tidak berefek apa-apa :( ..


Teknik Routing yang perlu di Test

Kalau kita punya dua (2) Analog Telepon Adapter (ATA) ada baiknya coba fork

  • Coba Dial Sekaligus
^08.*$=fork sip/sip:\0@192.168.0.5:5061 sip/sip:\0@192.168.0.6:5060;stoperror=busy
^021.*$=fork sip/sip:\0@192.168.0.6:5060 sip/sip:\0@192.168.0.5:5061;stoperror=busy
  • Coba Dial Satu-Satu, kalau gagal semua kirim busy tone
^08.*$=fork sip/sip:\0@192.168.0.5:5061 | sip/sip:\0@192.168.0.6:5060;stoperror=busy
^021.*$=fork sip/sip:\0@192.168.0.6:5060 | sip/sip:\0@192.168.0.5:5061;stoperror=busy
  • Coba dial satu-satu, beri selang 3 detik; terakhir kalau gagal kirim busy tone
^08.*$=fork sip/sip:\0@192.168.0.5:5061 |next=3000 sip/sip:\0@192.168.0.4:5060;stoperror=busy
^021.*$=fork sip/sip:\0@192.168.0.4:5060 |next=3000 sip/sip:\0@192.168.0.5:5061;stoperror=busy

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenBTS:_N210_Yate_Config_Test&oldid=39927"