Difference between revisions of "UBNT: openwrt"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
Line 93: | Line 93: | ||
* http://wiki.openwrt.org/toh/ubiquiti/nanostation | * http://wiki.openwrt.org/toh/ubiquiti/nanostation | ||
* http://downloads.openwrt.org/snapshots/trunk/atheros/ | * http://downloads.openwrt.org/snapshots/trunk/atheros/ | ||
+ | * http://wiki.openwrt.org/toh/start#ubiquiti | ||
==Pranala Menarik== | ==Pranala Menarik== |
Latest revision as of 13:06, 22 July 2012
Sumber: http://wiki.ubnt.com/Installing_OpenWRT_on_NanoStations/Bullets
Berikut adalah prosedur untuk mem-flash Ubiquiti Bullet 2 atau Nano2/Loco2. Prosedur ini akan mengganti AirOS firmware dengan OpenWRT firmware.
WARNING: penggunaan firmware ini akan men-disable beberapa fungsi device, seperti LED dan Ubiquiti Web interface. Kita dapat mengembalikannya melalui “Recovery of Ubiquiti firmware”
Download OpenWRT
Download OpenWRT firmware untuk Ubiquiti dari
http://downloads.openwrt.org/snapshots/trunk/atheros/ Nano2 http://downloads.openwrt.org/snapshots/trunk/atheros/openwrt-atheros-ubnt2-squashfs.bin Pico2 http://downloads.openwrt.org/snapshots/trunk/atheros/openwrt-atheros-ubnt2-pico2-squashfs.bin Nano5 http://downloads.openwrt.org/snapshots/trunk/atheros/openwrt-atheros-ubnt5-squashfs.bin
Alternatif lain menggunakan Kamikaze OpenWRT (terakhir di developed 2009)
Nano2 http://kamikaze.openwrt.org/8.09.2/atheros/openwrt-atheros-ubnt2-squashfs.bin Pico2 http://kamikaze.openwrt.org/8.09.2/atheros/openwrt-atheros-ubnt2-pico2-squashfs.bin Nano5 http://kamikaze.openwrt.org/8.09.2/atheros/openwrt-atheros-ubnt5-squashfs.bin
Flash Update
- Set IP PC 192.168.1.x
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update'.
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update
Akses ke UBNT OpenWRT
Lakukan
telnet 192.168.1.1
Akan tampak
Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. === IMPORTANT ============================ Use 'passwd' to set your login password this will disable telnet and enable SSH ------------------------------------------ BusyBox v1.19.4 (2012-07-19 03:29:28 PDT) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- ATTITUDE ADJUSTMENT (Bleeding Edge, r32777) ----------------------------------------------------- * 1/4 oz Vodka Pour all ingredients into mixing * 1/4 oz Gin tin with ice, strain into glass. * 1/4 oz Amaretto * 1/4 oz Triple sec * 1/4 oz Peach schnapps * 1/4 oz Sour mix * 1 splash Cranberry juice -----------------------------------------------------
Set Password Root
passwd passwordrootyangkitainginkan
Akses SSH
Selanjutnya akses menggunakan ssh
ssh root@192.168.1.1
Prosedur Recovery Firmware
Referensi
- http://wiki.ubnt.com/Installing_OpenWRT_on_NanoStations/Bullets
- http://wiki.openwrt.org/toh/ubiquiti/nanostation
- http://downloads.openwrt.org/snapshots/trunk/atheros/
- http://wiki.openwrt.org/toh/start#ubiquiti
Pranala Menarik
- UBNT
- UBNT: Teknik Recovery
- UBNT: Upload Firmware
- UBNT: Rebuild Firmware
- UBNT: firmware dengan OLSR
- UBNT: openwrt
- UBNT: olsr dengan openwrt
- UBNT: olsr dengan kamikaze openwrt
- UBNT: olsr dengan backfire openwrt RECOMMENDED
- UBNT: UniFi
- UBNT: UniFi Konfigurasi Awal
- UBNT: UniFi Manajemen HotSpot
- UBNT: OLSR Pembuatan Firmware
- UBNT: OLSR Konfigurasi
- OLSR - di UBNT
- OLSR - di Ubuntu
- OpenWRT