Difference between revisions of "UBNT: Teknik Recovery"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (12 intermediate revisions by the same user not shown) | |||
| Line 12: | Line 12: | ||
tftp> binary | tftp> binary | ||
tftp> trace | tftp> trace | ||
| − | tftp> put | + | tftp> put NanoStation2-v4.0.1.build4978.bin flash_update |
| + | tftp> quit | ||
| + | Contoh di atas adalah untuk me-recovery NanoStation2 ke firmware asli yang dapat di ambil di UBNT.com. Seperti, | ||
| + | |||
| + | http://www.ubnt.com/download#NanoStation2 | ||
| + | http://www.ubnt.com/download#NanoStation2:Loco | ||
| + | http://www.ubnt.com/download#PicoStation2 | ||
| + | |||
| + | Jika kita ingin upload ke firmware OpenWRT dapat menggunakan perintah kurang lebih | ||
| + | |||
| + | tftp 192.168.1.20 | ||
| + | tftp> binary | ||
| + | tftp> trace | ||
| + | tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update | ||
| + | tftp> quit | ||
| + | |||
| + | |||
| + | ==Cek Hasil Recovery== | ||
| + | |||
| + | * Diamkan beberapa saat sambil di ping ke IP address default | ||
| + | |||
| + | 192.168.1.20 (UBNT) | ||
| + | 192.168.1.1 (OpenWRT) | ||
| + | |||
| + | * Jika sudah ada responds, berarti UBNT bisa digunakan. | ||
==Pranala Menarik== | ==Pranala Menarik== | ||
| Line 19: | Line 43: | ||
* [[UBNT]] | * [[UBNT]] | ||
* [[UBNT: Teknik Recovery]] | * [[UBNT: Teknik Recovery]] | ||
| + | * [[UBNT: Upload Firmware]] | ||
* [[UBNT: Rebuild Firmware]] | * [[UBNT: Rebuild Firmware]] | ||
| + | * [[UBNT: firmware dengan OLSR]] | ||
* [[UBNT: openwrt]] | * [[UBNT: openwrt]] | ||
* [[UBNT: olsr dengan openwrt]] | * [[UBNT: olsr dengan openwrt]] | ||
| + | * [[UBNT: olsr dengan kamikaze openwrt]] | ||
| + | * [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED''' | ||
| + | * [[UBNT: UniFi]] | ||
| + | * [[UBNT: UniFi Konfigurasi Awal]] | ||
| + | * [[UBNT: UniFi Manajemen HotSpot]] | ||
| + | * [[UBNT: OLSR Pembuatan Firmware]] | ||
| + | * [[UBNT: OLSR Konfigurasi]] | ||
* [[OLSR - di UBNT]] | * [[OLSR - di UBNT]] | ||
| + | * [[OLSR - di Ubuntu]] | ||
| + | * [[OpenWRT]] | ||
Latest revision as of 07:02, 7 September 2012
Kalau salah flash firmware langkah yang perlu dilakukan
- Set IP PC 192.168.1.x
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update'.
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put NanoStation2-v4.0.1.build4978.bin flash_update tftp> quit
Contoh di atas adalah untuk me-recovery NanoStation2 ke firmware asli yang dapat di ambil di UBNT.com. Seperti,
http://www.ubnt.com/download#NanoStation2 http://www.ubnt.com/download#NanoStation2:Loco http://www.ubnt.com/download#PicoStation2
Jika kita ingin upload ke firmware OpenWRT dapat menggunakan perintah kurang lebih
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update tftp> quit
Cek Hasil Recovery
- Diamkan beberapa saat sambil di ping ke IP address default
192.168.1.20 (UBNT) 192.168.1.1 (OpenWRT)
- Jika sudah ada responds, berarti UBNT bisa digunakan.
Pranala Menarik
- UBNT
- UBNT: Teknik Recovery
- UBNT: Upload Firmware
- UBNT: Rebuild Firmware
- UBNT: firmware dengan OLSR
- UBNT: openwrt
- UBNT: olsr dengan openwrt
- UBNT: olsr dengan kamikaze openwrt
- UBNT: olsr dengan backfire openwrt RECOMMENDED
- UBNT: UniFi
- UBNT: UniFi Konfigurasi Awal
- UBNT: UniFi Manajemen HotSpot
- UBNT: OLSR Pembuatan Firmware
- UBNT: OLSR Konfigurasi
- OLSR - di UBNT
- OLSR - di Ubuntu
- OpenWRT