Difference between revisions of "UBNT: olsr dengan openwrt"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (20 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Sumber: http://wiki.ubnt.com/OLSR_on_OpenWrt | |
| − | + | Tulisan ini menerangkan cara menginstalasi, konfigurasi dan monitor OLSR di Ubiquiti Device dengan OpenWRT yang di install. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | ==Kebutuhan== | |
| − | |||
| − | + | * Komputer dengan Browser (mis. Firefox) dan ssh client. | |
| − | + | * Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware | |
| − | |||
| − | + | http://downloads.openwrt.org/snapshots/trunk/atheros/ | |
| − | + | * Akses Interent yang berlaku untuk Device & Computer. Edit network pada OpenWRT UBNT agar sesuai dengan jaringan, | |
| − | |||
| − | + | Edit Network | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | vi /etc/config/network | |
| − | + | config interface lan | |
| + | option ifname eth0 | ||
| + | option type bridge | ||
| + | option proto static | ||
| + | option ipaddr 192.168.0.10 | ||
| + | option netmask 255.255.255.0 | ||
| + | option gateway 192.168.0.222 | ||
| − | + | Edit nameserver | |
| − | |||
| − | |||
| − | + | vi /etc/resolv.conf | |
| − | + | nameserver 8.8.8.8 | |
| + | ==Instalasi== | ||
| + | |||
| + | * Pastikan kita sudah menset root password & akses ssh ke device | ||
| + | * ssh ke device, misalnya | ||
| + | |||
| + | ssh root@192.168.1.1 | ||
| + | |||
| + | * update opkg.list | ||
| + | |||
| + | opkg update | ||
| + | |||
| + | * install luci administration UI & olsr show | ||
| + | |||
| + | mkdir /root/tmp | ||
| + | opkg --tmp-dir /root/tmp install luci | ||
| + | |||
| + | ==Konfigurasi== | ||
| + | |||
| + | * Login ke Web OpenWRT menggunakan password root yang sudah di set sebelumnya | ||
| + | |||
| + | * Masuk ke Services>OLSR dan konfigurasi OLSR daemon. | ||
| + | |||
| + | * Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins | ||
| + | |||
| + | ==Monitoring== | ||
| + | |||
| + | Monitor OLSR status di Luci UI melalui Status>OLSR. | ||
| + | Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX". | ||
| + | |||
| + | Cara membacanya: | ||
| + | |||
| + | NQ parameter 0 (sangat jelek) s/d 1 (sangat baik) | ||
| + | NLQ parameter 0 (sangat jelek) s/d 1 (sangat baik) | ||
| + | ETX paremeter (global transmission quality) dari 1 s/d tak terhingga | ||
| + | ETX antara 1-2 sambungan baik | ||
| + | ETX antara 2-3 sambungan normal | ||
| + | ETX di atas 3 sambungan tidak baik | ||
==Referensi== | ==Referensi== | ||
* http://wiki.ubnt.com/OLSR_on_OpenWrt | * http://wiki.ubnt.com/OLSR_on_OpenWrt | ||
| − | |||
==Pranala Menarik== | ==Pranala Menarik== | ||
| Line 48: | Line 77: | ||
* [[UBNT]] | * [[UBNT]] | ||
* [[UBNT: Teknik Recovery]] | * [[UBNT: Teknik Recovery]] | ||
| + | * [[UBNT: Upload Firmware]] | ||
* [[UBNT: Rebuild Firmware]] | * [[UBNT: Rebuild Firmware]] | ||
| + | * [[UBNT: firmware dengan OLSR]] | ||
* [[UBNT: openwrt]] | * [[UBNT: openwrt]] | ||
* [[UBNT: olsr dengan openwrt]] | * [[UBNT: olsr dengan openwrt]] | ||
| + | * [[UBNT: olsr dengan kamikaze openwrt]] | ||
| + | * [[UBNT: olsr dengan backfire openwrt]] '''RECOMMENDED''' | ||
| + | * [[UBNT: UniFi]] | ||
| + | * [[UBNT: UniFi Konfigurasi Awal]] | ||
| + | * [[UBNT: UniFi Manajemen HotSpot]] | ||
| + | * [[UBNT: OLSR Pembuatan Firmware]] | ||
| + | * [[UBNT: OLSR Konfigurasi]] | ||
* [[OLSR - di UBNT]] | * [[OLSR - di UBNT]] | ||
| + | * [[OLSR - di Ubuntu]] | ||
| + | * [[OpenWRT]] | ||
Latest revision as of 07:58, 22 July 2012
Sumber: http://wiki.ubnt.com/OLSR_on_OpenWrt
Tulisan ini menerangkan cara menginstalasi, konfigurasi dan monitor OLSR di Ubiquiti Device dengan OpenWRT yang di install.
Kebutuhan
- Komputer dengan Browser (mis. Firefox) dan ssh client.
- Ubiquity Device dengan OpenWRT yang sudah terinstalasi. Pastikan menggunakan kamikaze firmware
http://downloads.openwrt.org/snapshots/trunk/atheros/
- Akses Interent yang berlaku untuk Device & Computer. Edit network pada OpenWRT UBNT agar sesuai dengan jaringan,
Edit Network
vi /etc/config/network
config interface lan
option ifname eth0
option type bridge
option proto static
option ipaddr 192.168.0.10
option netmask 255.255.255.0
option gateway 192.168.0.222
Edit nameserver
vi /etc/resolv.conf
nameserver 8.8.8.8
Instalasi
- Pastikan kita sudah menset root password & akses ssh ke device
- ssh ke device, misalnya
ssh root@192.168.1.1
- update opkg.list
opkg update
- install luci administration UI & olsr show
mkdir /root/tmp opkg --tmp-dir /root/tmp install luci
Konfigurasi
- Login ke Web OpenWRT menggunakan password root yang sudah di set sebelumnya
- Masuk ke Services>OLSR dan konfigurasi OLSR daemon.
- Paket tambahan bisa di install di System>Process. Luci compatible OLSR plugins start with olsr-luci-*. Then configure them in Services>OLSR>Plugins
Monitoring
Monitor OLSR status di Luci UI melalui Status>OLSR. Kita akan menemukan "Neighbour Quality", "Neighbour Link Quality" and "ETX".
Cara membacanya:
NQ parameter 0 (sangat jelek) s/d 1 (sangat baik) NLQ parameter 0 (sangat jelek) s/d 1 (sangat baik) ETX paremeter (global transmission quality) dari 1 s/d tak terhingga ETX antara 1-2 sambungan baik ETX antara 2-3 sambungan normal ETX di atas 3 sambungan tidak baik
Referensi
Pranala Menarik
- UBNT
- UBNT: Teknik Recovery
- UBNT: Upload Firmware
- UBNT: Rebuild Firmware
- UBNT: firmware dengan OLSR
- UBNT: openwrt
- UBNT: olsr dengan openwrt
- UBNT: olsr dengan kamikaze openwrt
- UBNT: olsr dengan backfire openwrt RECOMMENDED
- UBNT: UniFi
- UBNT: UniFi Konfigurasi Awal
- UBNT: UniFi Manajemen HotSpot
- UBNT: OLSR Pembuatan Firmware
- UBNT: OLSR Konfigurasi
- OLSR - di UBNT
- OLSR - di Ubuntu
- OpenWRT