Difference between revisions of "GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2"

From OnnoWiki
Jump to navigation Jump to search
 
(27 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==Handling USRP==
 +
 +
[[Ubuntu]] menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke [[USRP]]. Script berikut akan memberikan akses bagi user untuk menghandel [[USRP]] via [[USB]] baik secara live atau hot-plug.
 +
 +
sudo addgroup usrp
 +
sudo usermod -G usrp -a <YOUR_USERNAME>
 +
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
 +
sudo chown root.root tmpfile
 +
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules
 +
 +
Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi [[USRP]] di [[USB]] tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot [[komputer]].
 +
 +
sudo udevadm control --reload-rules
 +
 +
atau
 +
 +
sudo /etc/init.d/udev stop
 +
sudo /etc/init.d/udev start
 +
 +
atau
 +
 +
sudo killall -HUP udevd
 +
 +
Kita dapat mencek jika [[USRP]] telah di kenali dengan mengamati /dev/bus/usb setelah [[USRP]] di pasang menggunakan perintah
 +
 +
ls -lR /dev/bus/usb | grep usrp
 +
 +
Harusnya akan keluar seperti
 +
 +
crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002
 +
 +
 +
Setiap [[USRP]] yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.
 +
 +
 
==Instal Library==
 
==Instal Library==
  
Line 17: Line 52:
 
  python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
 
  python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
 
  autoconf libtool libosip2-dev libortp-dev \
 
  autoconf libtool libosip2-dev libortp-dev \
−
  libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
+
  libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang
−
asterisk asterisk-mysql
 
−
 
 
 
==Instal SWIG==
 
==Instal SWIG==
  
Line 25: Line 58:
  
 
  Download dari http://sourceforge.net/projects/swig/files/swig/
 
  Download dari http://sourceforge.net/projects/swig/files/swig/
−
  cp swig-2.0.4.tar.gz /usr/local/src/
+
  cp swig-2.0.7.tar.gz /usr/local/src/
 
  cd /usr/local/src/
 
  cd /usr/local/src/
−
  tar zxvf swig-2.0.4.tar.gz  
+
  tar zxvf swig-2.0.7.tar.gz  
−
  cd /usr/local/src/swig-2.0.4/
+
  cd /usr/local/src/swig-2.0.7/
 
  ./configure
 
  ./configure
 
  make
 
  make
Line 48: Line 81:
  
  
−
==Handling USRP==
 
  
−
[[Ubuntu]] menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke [[USRP]]. Script berikut akan memberikan akses bagi user untuk menghandel [[USRP]] via [[USB]] baik secara live atau hot-plug.
 
  
−
sudo addgroup usrp
+
==Install GNURadio==
−
sudo usermod -G usrp -a <YOUR_USERNAME>
+
 
−
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
+
Sebaiknya pada saat melakukan instalasi [[GNURadio]], kita pasang [[USRP]] ke [[USB]] port-nya.
−
sudo chown root.root tmpfile
+
 
−
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules
+
Download aplikasi [[GNURadio]] dari
  
−
Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi [[USRP]] di [[USB]] tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot [[komputer]].
+
http://gnuradio.org/redmine/attachments/download/261/gnuradio-3.4.1.tar.gz
 +
http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz
  
−
sudo udevadm control --reload-rules
+
Install [[GNURadio]]
  
−
atau
+
cp gnuradio-3.4.2.tar.gz /usr/local/src/
 +
cd /usr/local/src/
 +
tar zxvf gnuradio-3.4.2.tar.gz
 +
cd /usr/local/src/gnuradio-3.4.2/
  
−
sudo /etc/init.d/udev stop
+
===Patch untuk 52MHz===
−
sudo /etc/init.d/udev start
 
  
−
atau
+
Edit
  
−
  sudo killall -HUP udevd
+
  vi /usr/local/src/gnuradio-3.4.2/usrp/host/lib/usrp_basic.cc
  
−
Kita dapat mencek jika [[USRP]] telah di kenali dengan mengamati /dev/bus/usb setelah [[USRP]] di pasang menggunakan perintah
+
Ubah line 110 menjadi
  
−
  ls -lR /dev/bus/usb | grep usrp
+
  // d_verbose (false), d_fpga_master_clock_freq(64000000), d_db(2)
 +
    d_verbose (false), d_fpga_master_clock_freq(52000000), d_db(2)
  
−
Harusnya akan keluar seperti
+
Edit
  
−
  crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002
+
  vi /usr/local/src/gnuradio-3.4.2/usrp/host/lib/db_bitshark_rx.cc
  
 +
Ubah line 151 menjadi
  
−
Setiap [[USRP]] yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.
+
// set_clock_scheme(0,64000000);
 +
set_clock_scheme(0,52000000);
  
−
==Install GNURadio==
 
  
−
Sebaiknya pada saat melakukan instalasi [[GNURadio]], kita pasang [[USRP]] ke [[USB]] port-nya.
 
  
−
Download aplikasi [[GNURadio]] dari
+
'''JANGAN LUPA'''
  
−
http://gnuradio.org/redmine/attachments/download/261/gnuradio-3.4.1.tar.gz
+
* modifikasi OpenBTS.config agar TRX.Path "../Transceiver52M/transceiver".
  
−
Install [[GNURadio]]
+
===Compile & Install===
  
−
cp gnuradio-3.4.1.tar.gz /usr/local/src/
+
  cd /usr/local/src/gnuradio-3.4.2/
−
  cd /usr/local/src/
+
  ./bootstrap
−
tar zxvf gnuradio-3.4.1.tar.gz
 
−
  cd /usr/local/src/gnuradio-3.4.1/
 
 
  ./configure --disable-usrp2 --enable-usrp
 
  ./configure --disable-usrp2 --enable-usrp
 
  make clean
 
  make clean
Line 120: Line 153:
 
  export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
 
  export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
 
  export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
 
  export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
 +
 +
 +
==Test==
 +
 +
Boot komputer. Sambungan USRP.
 +
Lakukan
 +
 +
cd /usr/local/src/gnuradio-3.4.2/gnuradio-examples/python/usrp
 +
./usrp_benchmark_usb.py
 +
 +
Hasilnya
 +
 +
Testing 2MB/sec... usb_throughput = 2M
 +
ntotal    = 1000000
 +
nright    = 998137
 +
runlength = 998137
 +
delta    = 1863
 +
OK
 +
Testing 4MB/sec... usb_throughput = 4M
 +
ntotal    = 2000000
 +
nright    = 1998117
 +
runlength = 1998117
 +
delta    = 1883
 +
OK
 +
Testing 8MB/sec... usb_throughput = 8M
 +
ntotal    = 4000000
 +
nright    = 3998437
 +
runlength = 3998437
 +
delta    = 1563
 +
OK
 +
Testing 16MB/sec... usb_throughput = 16M
 +
ntotal    = 8000000
 +
nright    = 7998859
 +
runlength = 7998859
 +
delta    = 1141
 +
OK
 +
Testing 32MB/sec... usb_throughput = 32M
 +
ntotal    = 16000000
 +
nright    = 15996766
 +
runlength = 15996766
 +
delta    = 3234
 +
OK
 +
Max USB/USRP throughput = 32MB/sec
  
 
==Referensi==
 
==Referensi==
Line 131: Line 207:
  
 
* [[OpenBTS]]
 
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
  
 
===Persiapan===
 
===Persiapan===
Line 136: Line 213:
 
* [[USRP: High Precision Clock]]
 
* [[USRP: High Precision Clock]]
 
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 
* [[OpenBTS: GIT Source Code]]
 
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
 +
* [[USRP: Tip Pemesanan]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
Line 143: Line 225:
 
* [[GNURadio]]
 
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Menggunakan UHD]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Programming Untuk Pemula]]
 
* [[GNURadio: Programming Untuk Pemula]]
−
* [[OpenBTS: Ubuntu Install]]
+
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
−
* [[OpenBTS: Konfigurasi]]
+
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
−
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]]
+
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Menjalankan smqueue]]
 
* [[OpenBTS: Menjalankan smqueue]]
−
* [[OpenBTS: Mengoperasikan BTS]]
+
* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Operasi 1800 MHz]]
 
* [[OpenBTS: Operasi 1800 MHz]]
Line 158: Line 245:
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: SMS]]
 
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
  
 
===OpenBTS 2.8===
 
===OpenBTS 2.8===
  
−
* [[GNURadio: Ubuntu 11.10 Install]] '''*NOT RECOMMENED*'''
+
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
−
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] '''NOT RECOMMENDED'''
+
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
−
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.1]]
+
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]]
−
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]]
+
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Identifikasi Device]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
−
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
+
* [[OpenBTS: dari GIT ttsou]]
−
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
+
* [[OpenBTS: 2.8 dari SVN Install]]
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 +
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Config Test]]
 +
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Konfigurasi]]
 
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
 +
===Multi OpenBTS 2.8===
 +
 +
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
  
 
===Ettus E110===
 
===Ettus E110===
  
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
−
* [[OpenBTS: E110 Install Image di MicroSD]]
+
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
−
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] '''*NOT RECOMMENDED*'''
+
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
 
 +
===GPRS===
 +
 
 +
* [[OpenBTS: GPRS]]
 +
 
 +
===Power Amplifier===
 +
 
 +
* [[Driver 900MHz]]
 +
* [[Power Amplifier 900MHz]]
 +
* [[Duplexer]]
 +
* [[OpenBTS: Menaikan Jangkauan OpenBTS]]
  
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]
Line 200: Line 337:
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
  
 
===Catatan Sejarah===
 
===Catatan Sejarah===
Line 207: Line 346:
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 +
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 +
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
 +
===Dokumentasi Video===
 +
 +
* http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
 +
* http://youtu.be/8ogOcUSpINU (1/6)
 +
* http://youtu.be/F5d7HGuhppk (2/6)
 +
* http://youtu.be/90Jgq6bOgrQ (3/6)
 +
* http://youtu.be/cNkx_qNqdfc (4/6)
 +
* http://youtu.be/6LCuoeI57ak (5/6)
 +
* http://youtu.be/-dEqcHoIlYk (6/6)
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 07:58, 21 February 2013

Handling USRP

Ubuntu menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke USRP. Script berikut akan memberikan akses bagi user untuk menghandel USRP via USB baik secara live atau hot-plug. 

sudo addgroup usrp
sudo usermod -G usrp -a <YOUR_USERNAME>
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
sudo chown root.root tmpfile
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules

Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi USRP di USB tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot komputer. 

sudo udevadm control --reload-rules

atau 

sudo /etc/init.d/udev stop
sudo /etc/init.d/udev start

atau 

sudo killall -HUP udevd

Kita dapat mencek jika USRP telah di kenali dengan mengamati /dev/bus/usb setelah USRP di pasang menggunakan perintah 

ls -lR /dev/bus/usb | grep usrp

Harusnya akan keluar seperti 

crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002


Setiap USRP yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.


Instal Library

Update 

sudo apt-get update

Instal untuk Ubuntu 11.10 

sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig \
g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang

Instal SWIG

Install secara manual SWIG 

Download dari http://sourceforge.net/projects/swig/files/swig/
cp swig-2.0.7.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf swig-2.0.7.tar.gz 
cd /usr/local/src/swig-2.0.7/
./configure
make
make install

Instal QWT

Install secara manual QWT 

Download dari http://sourceforge.net/projects/qwt/files/
cp qwt-6.0.1.tar.bz2 /usr/local/src/
cd /usr/local/src/
tar jxvf qwt-6.0.1.tar.bz2 
cd /usr/local/src/qwt-6.0.1/
qmake
make
make install



Install GNURadio

Sebaiknya pada saat melakukan instalasi GNURadio, kita pasang USRP ke USB port-nya.

Download aplikasi GNURadio dari 

http://gnuradio.org/redmine/attachments/download/261/gnuradio-3.4.1.tar.gz
http://gnuradio.org/redmine/attachments/download/279/gnuradio-3.4.2.tar.gz

Install GNURadio 

cp gnuradio-3.4.2.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf gnuradio-3.4.2.tar.gz 
cd /usr/local/src/gnuradio-3.4.2/

Patch untuk 52MHz

Edit 

vi /usr/local/src/gnuradio-3.4.2/usrp/host/lib/usrp_basic.cc

Ubah line 110 menjadi 

//  d_verbose (false), d_fpga_master_clock_freq(64000000), d_db(2)
    d_verbose (false), d_fpga_master_clock_freq(52000000), d_db(2)

Edit 

vi /usr/local/src/gnuradio-3.4.2/usrp/host/lib/db_bitshark_rx.cc

Ubah line 151 menjadi 

// set_clock_scheme(0,64000000);
set_clock_scheme(0,52000000);


JANGAN LUPA

  • modifikasi OpenBTS.config agar TRX.Path "../Transceiver52M/transceiver".

Compile & Install

cd /usr/local/src/gnuradio-3.4.2/
./bootstrap
./configure --disable-usrp2 --enable-usrp
make clean
make all
make
make check
make install
sudo ldconfig

Edit bashrc

Masukan PYTHONPATH dengan cara mengedit 

vi ~/.bashrc

Tambahkan 

PYTHONPATH=/usr/local/lib/python2.7/dist-packages
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

Untuk memastikan ada baiknya lakukan 

sudo ldconfig
export PYTHONPATH=/usr/local/lib/python2.7/dist-packages
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/


Test

Boot komputer. Sambungan USRP. Lakukan 

cd /usr/local/src/gnuradio-3.4.2/gnuradio-examples/python/usrp
./usrp_benchmark_usb.py

Hasilnya 

Testing 2MB/sec... usb_throughput = 2M
ntotal    = 1000000
nright    = 998137
runlength = 998137
delta     = 1863
OK
Testing 4MB/sec... usb_throughput = 4M
ntotal    = 2000000
nright    = 1998117
runlength = 1998117
delta     = 1883
OK
Testing 8MB/sec... usb_throughput = 8M
ntotal    = 4000000
nright    = 3998437
runlength = 3998437
delta     = 1563
OK
Testing 16MB/sec... usb_throughput = 16M
ntotal    = 8000000
nright    = 7998859
runlength = 7998859
delta     = 1141
OK
Testing 32MB/sec... usb_throughput = 32M
ntotal    = 16000000
nright    = 15996766
runlength = 15996766
delta     = 3234
OK
Max USB/USRP throughput = 32MB/sec

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

Ettus E110

GPRS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=GNURadio:_Ubuntu_11.10_Instal_GNURadio_3.4.2&oldid=35382"