Difference between revisions of "GNURadio: Ubuntu 11.10 Install dari GIT GNURadio"

From OnnoWiki
Jump to navigation Jump to search
 
(70 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==Handling USRP==
 +
 +
[[Ubuntu]] menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke [[USRP]]. Script berikut akan memberikan akses bagi user untuk menghandel [[USRP]] via [[USB]] baik secara live atau hot-plug.
 +
 +
sudo addgroup usrp
 +
sudo usermod -G usrp -a <YOUR_USERNAME>
 +
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
 +
sudo chown root.root tmpfile
 +
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules
 +
 +
Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi [[USRP]] di [[USB]] tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot [[komputer]].
 +
 +
sudo udevadm control --reload-rules
 +
 +
atau
 +
 +
sudo /etc/init.d/udev stop
 +
sudo /etc/init.d/udev start
 +
 +
atau
 +
 +
sudo killall -HUP udevd
 +
 +
atau paling aman
 +
 +
Reboot komputer
 +
 +
Kita dapat mencek jika [[USRP]] telah di kenali dengan mengamati /dev/bus/usb setelah [[USRP]] di pasang menggunakan perintah
 +
 +
ls -lR /dev/bus/usb | grep usrp
 +
 +
Harusnya akan keluar seperti
 +
 +
crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002
 +
 +
 +
Setiap [[USRP]] yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.
 +
 
==Instal Aplikasi Pendukung==
 
==Instal Aplikasi Pendukung==
  
Line 18: Line 56:
 
  autoconf libtool libosip2-dev libortp-dev \
 
  autoconf libtool libosip2-dev libortp-dev \
 
  libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
 
  libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
−
  asterisk asterisk-mysql
+
git-core git-doc gitk stgit git-arch git-cvs git-svn git-email gitweb \
 +
  asterisk asterisk-mysql cmake
 +
 
 +
==Instal SWIG==
 +
 
 +
Install secara manual SWIG
 +
 
 +
Download dari http://sourceforge.net/projects/swig/files/swig/
 +
cp swig-2.0.5.tar.gz /usr/local/src/
 +
cd /usr/local/src/
 +
tar zxvf swig-2.0.5.tar.gz
 +
cd /usr/local/src/swig-2.0.5/
 +
./configure
 +
make
 +
make install
 +
 
 +
==Instal QWT==
 +
 
 +
Install secara manual QWT
 +
 
 +
Download dari http://sourceforge.net/projects/qwt/files/
 +
cp qwt-6.0.1.tar.bz2 /usr/local/src/
 +
cd /usr/local/src/
 +
tar jxvf qwt-6.0.1.tar.bz2
 +
cd /usr/local/src/qwt-6.0.1/
 +
qmake
 +
make
 +
make install
 +
 
 +
==Instal boost==
 +
 
 +
Instalasi secara manual boost
 +
 
 +
Download dari http://sourceforge.net/projects/boost/files/boost/1.49.0/boost_1_49_0.zip/download
  
−
==Download GNURadio==
+
cp boost_1_49_0.zip /usr/local/src
 +
cd /usr/local/src
 +
unzip boost_1_49_0.zip
 +
chmod -Rf 777 /usr/local/src/boost_1_49_
 +
mkdir /opt/boost_1_49_0
 +
BOOST_PREFIX=/opt/boost_1_49_0
 +
cd /usr/local/src/boost_1_49_0 
 +
./bootstrap.sh
 +
sudo ./b2 --prefix=$BOOST_PREFIX --with-thread --with-date_time \
 +
--with-program_options --with-filesystem --with-system \
 +
--layout=versioned threading=multi variant=release install
  
−
Install GIT
+
==Siapkan GIT==
  
−
  apt-get install git-core git-doc gitk stgit
+
Install GIT minimal
 +
 
 +
apt-get install git-core git
 +
 
 +
jika ingin lebih eksis dapat menginstalasi lebih lengkap
 +
 
 +
  apt-get install git-core git-doc gitk stgit git-arch git-cvs git-svn git-email gitweb
 +
 
 +
==Download GNURadio & UHD==
  
 
Download menggunakan perintah
 
Download menggunakan perintah
  
 
  cd /usr/local/src
 
  cd /usr/local/src
−
  git clone git://gnuradio.org/gnuradio gnuradio.git
+
  git clone git://gnuradio.org/gnuradio gnuradio.git  
 +
git clone git://ettus.sourcerepo.com/ettus/uhd.git uhd.git
 +
 
 +
==Compile UHD==
 +
 
 +
cd /usr/local/src/uhd.git/host/
 +
mkdir build
 +
cd build
 +
cmake ../
 +
make
 +
make test
 +
sudo make install
 +
sudo ldconfig
 +
 
 +
PKG_CONFIG_PATH=/usr/local/src/uhd.git/host/build/
 +
export PKG_CONFIG_PATH
 +
 
 +
===Setup UHD===
 +
 
 +
Download & Install firmware
 +
 
 +
wget http://files.ettus.com/binaries/master_images/uhd-images_003.004.001-98-gae40e8f5.tar.gz
 +
tar zxvf uhd-images_003.004.001-98-gae40e8f5.tar.gz
 +
cp -Rf uhd-images_003.004.001-98-gae40e8f5/* /usr/local/
 +
 
 +
Setup UHD agar mengetahui bahwa USRP1 menggunakan clock 52MHz
 +
 
 +
cd /usr/local/share/uhd/utils/
 +
./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000
 +
 
 +
Hasilnya
 +
 
 +
linux; GNU C++ version 4.6.1; Boost_104601; UHD_003.004.001-101-gff2649ca
 +
 +
Creating USRP device from address: type=usrp1
 +
-- Opening a USRP1 device...
 +
-- Using FPGA clock rate of 64.000000MHz...
 +
 +
Fetching current settings from EEPROM...
 +
    EEPROM ["mcr"] is ""
 +
 +
Setting EEPROM ["mcr"] to "52000000"...
 +
Power-cycle the USRP device for the changes to take effect.
 +
 
 +
 
 +
Cek menggunakan
 +
 
 +
cd /usr/local/share/uhd/utils
 +
./uhd_usrp_probe | more
 +
 
 +
Hasilnya antara lain harus keluar
 +
 
 +
|    /
 +
|  |      Mboard: USRP1
 +
|  |  serial: 0R24X5U1
 +
|  |  '''mcr: 52000255'''
 +
|  | 
 +
|  |  Time sources: none
 +
|  |  Clock sources: '''internal'''
 +
|  |  Sensors:
 +
 
 +
==Compile GNURadio==
 +
 
 +
'''*WARNING* : source git yang baru tidak ada bootstrap'''
 +
Sebaiknya compile menggunakan cmake di bawah.
 +
 
 +
Sambungan [[USRP]] ke [[PC]].
 +
Instalasi & Compile menggunakan cmake
 +
 
 +
cd /usr/local/src/gnuradio.git
 +
./bootstrap
 +
./configure --enable-gr-uhd
 +
 
 +
atau
 +
 
 +
./configure --enable-all-components \
 +
            --disable-gr-audio-osx \
 +
            --disable-gr-audio-windows \
 +
            --disable-gr-comedi \
 +
            --disable-gr-qtgui \
 +
            --disable-gr-shd
 +
make
 +
make check
 +
sudo make install
 +
sudo ldconfig
 +
 
 +
 
 +
==Compile GNURadio==
 +
 
 +
./configure --disable-all-components --enable-usrp --enable-gruel
 +
 
 +
==Compile GNURadio menggunakan cmake==
 +
 
 +
Cara ini tidak bisa di satukan dengan cara di atas akan error
 +
 
 +
cd /usr/local/src/gnuradio.git
 +
mkdir build
 +
cd /usr/local/src/gnuradio.git/build
 +
 +
cmake -DBOOST_ROOT=$BOOST_PREFIX \
 +
-DBoost_INCLUDE_DIR=$BOOST_PREFIX/include/boost-1_49/ \
 +
-DBoost_LIBRARY_DIRS=$BOOST_PREFIX/lib /usr/local/src/gnuradio.git
 +
 +
make
 +
make test
 +
sudo make install
 +
ldconfig
 +
 
 +
 
 +
===Error Bad Practice===
 +
 
 +
Keluar error pada saat menjalankan cmake
 +
 
 +
CMake Error at CMakeLists.txt:22 (message):
 +
  Prevented in-tree built.  This is bad practice.
 +
-- Configuring incomplete, errors occurred!
 +
 
 +
'''SOLUSI:'''
 +
 
 +
* Jangan di satukan cara compile ini engan cara tradisional di atas.
 +
 
 +
==Instalasi UHD USRP==
 +
 
 +
Instalasi UHD USRP Support
 +
 
 +
cd /usr/local/share/uhd/utils
 +
sudo cp uhd-usrp.rules /etc/udev/rules.d/
 +
sudo udevadm control --reload-rules
 +
 
 +
 
 +
Setup firmware USRP1 agar nilai clock 52MHz
 +
 
 +
cd /usr/local/share/uhd/utils/
 +
./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000
 +
 
 +
===Error===
 +
 
 +
Setelah dilakukan
 +
 
 +
./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000
 +
 
 +
Keluar
 +
 
 +
UHD Warning:
 +
    Could not locate USRP1 firmware.
 +
    Please install the images package.
 +
Error: LookupError: KeyError: No devices found for ----->
 +
Device Address:
 +
    type: usrp1
 +
 
 +
'''SOLUSI:'''
 +
 
 +
Lakukan [[GNURadio: UHD Image]]
 +
 
 +
==Perbaiki PATH==
  
−
==Compile==
+
Edit
  
−
Coba install menggunakan cmake
+
gedit .bashrc
  
−
$ mkdir $(builddir)
+
Masukan
−
$ cd $(builddir)
 
−
$ cmake [OPTIONS] $(srcdir)
 
−
$ make
 
−
$ make test
 
−
$ sudo make instal
 
  
 +
export PATH=$PATH:/usr/local/bin/
 +
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
 +
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
 +
export PYTHONPATH=$PYTHONPATH:/usr/local/lib/python2.7/site-packages/
  
 
==Referensi==
 
==Referensi==
  
 
* http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopingWithGit
 
* http://gnuradio.org/redmine/projects/gnuradio/wiki/DevelopingWithGit
 +
* http://gnuradio.org/redmine/projects/gnuradio/wiki/BuildConfiguration
 +
* http://gnuradio.org/redmine/projects/gnuradio/wiki/CMakeWork
 +
* http://gnuradio.org/redmine/projects/gnuradio/wiki/UbuntuInstall
 +
* http://www.ruby-forum.com/topic/215835
 +
* http://www.sbrac.org/files/build-gnuradio
 +
* http://gnuradio.org/redmine/projects/gnuradio/wiki/Components
 +
* http://files.ettus.com/uhd_docs/manual/html/transport.html#usb-transport-libusb
  
 
==Pranala Menarik==
 
==Pranala Menarik==
  
 
* [[OpenBTS]]
 
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
  
−
===Persiapan Hardware===
+
===Persiapan===
  
 
* [[USRP: High Precision Clock]]
 
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
  
 +
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Menggunakan UHD]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Programming Untuk Pemula]]
 
* [[GNURadio: Programming Untuk Pemula]]
−
* [[OpenBTS: Ubuntu Install]]
+
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
−
* [[OpenBTS: Konfigurasi]]
+
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
−
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]]
+
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Menjalankan smqueue]]
 
* [[OpenBTS: Menjalankan smqueue]]
−
* [[OpenBTS: Mengoperasikan BTS]]
+
* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Operasi 1800 MHz]]
 
* [[OpenBTS: Operasi 1800 MHz]]
Line 74: Line 336:
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: SMS]]
 
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
  
 
===OpenBTS 2.8===
 
===OpenBTS 2.8===
  
−
* [[GNURadio: Ubuntu 11.10 Install]] '''*NOT RECOMMENED*'''
+
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
−
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] '''NOT RECOMMENDED'''
+
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
−
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]]
+
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Identifikasi Device]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
−
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
+
* [[OpenBTS: dari GIT ttsou]]
−
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
+
* [[OpenBTS: 2.8 dari SVN Install]]
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 +
* [[OpenBTS: Yate Softswitch]]
 +
* [[OpenBTS: Yate Config Test]]
 +
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
 +
===Multi OpenBTS 2.8===
 +
 +
* [[OpenBTS: Pola Multi OpenBTS]]
  
 
===Ettus E110===
 
===Ettus E110===
  
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
−
* [[OpenBTS: E110 Install Image di MicroSD]]
+
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Cek Daughter Board]]
 +
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
 +
===GPRS===
 +
 +
* [[OpenBTS: GPRS]]
 +
 +
===Power Amplifier===
 +
 +
* [[Driver 900MHz]]
 +
* [[Power Amplifier 900MHz]]
 +
* [[Duplexer]]
  
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]
Line 112: Line 420:
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
  
 
===Catatan Sejarah===
 
===Catatan Sejarah===
Line 119: Line 429:
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 +
 +
===Dokumentasi Video===
 +
 +
* http://youtu.be/8ogOcUSpINU (1/6)
 +
* http://youtu.be/F5d7HGuhppk (2/6)
 +
* http://youtu.be/90Jgq6bOgrQ (3/6)
 +
* http://youtu.be/cNkx_qNqdfc (4/6)
 +
* http://youtu.be/6LCuoeI57ak (5/6)
 +
* http://youtu.be/-dEqcHoIlYk (6/6)
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 19:02, 13 August 2012

Handling USRP

Ubuntu menggunakan udev untuk menangani hotplug devices, dan secara default tidak memberikan akses non-root ke USRP. Script berikut akan memberikan akses bagi user untuk menghandel USRP via USB baik secara live atau hot-plug. 

sudo addgroup usrp
sudo usermod -G usrp -a <YOUR_USERNAME>
echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
sudo chown root.root tmpfile
sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules

Pada titik ini, Ubuntu telah di konfigurasi untuk tahu apa yang harus di kerjakan jika medeteksi USRP di USB tapi "udev" perlu me-reload rules untuk memasukan rules yang baru kita buat. Langkah berikut dapat dilakukan sehingga kita tidak perlu me-reboot komputer. 

sudo udevadm control --reload-rules

atau 

sudo /etc/init.d/udev stop
sudo /etc/init.d/udev start

atau 

sudo killall -HUP udevd

atau paling aman 

Reboot komputer

Kita dapat mencek jika USRP telah di kenali dengan mengamati /dev/bus/usb setelah USRP di pasang menggunakan perintah 

ls -lR /dev/bus/usb | grep usrp

Harusnya akan keluar seperti 

crw-rw---- 1 root usrp 189, 1 2010-12-09 17:38 002


Setiap USRP yang terpasang akan terdaftar pada group 'usrp' dan mode 'crw-rw----'.

Instal Aplikasi Pendukung

Update 

sudo apt-get update

Instal untuk Ubuntu 11.10 

sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig \
g++ automake libtool python-dev libfftw3-dev \
libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
python-cheetah python-lxml doxygen qt4-dev-tools \
libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools \
libpcre3 libpcre3-dbg libpcre3-dev libpcrecpp0 \
python-wxgtk2.8 python-wxtools wx2.8-i18n libwxgtk2.8-dev libgtk2.0-dev \
autoconf libtool libosip2-dev libortp-dev \
libusb-1.0-0-dev g++ sqlite3 libsqlite3-dev erlang \
git-core git-doc gitk stgit git-arch git-cvs git-svn git-email gitweb \
asterisk asterisk-mysql cmake

Instal SWIG

Install secara manual SWIG 

Download dari http://sourceforge.net/projects/swig/files/swig/
cp swig-2.0.5.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf swig-2.0.5.tar.gz 
cd /usr/local/src/swig-2.0.5/
./configure
make
make install

Instal QWT

Install secara manual QWT 

Download dari http://sourceforge.net/projects/qwt/files/
cp qwt-6.0.1.tar.bz2 /usr/local/src/
cd /usr/local/src/
tar jxvf qwt-6.0.1.tar.bz2 
cd /usr/local/src/qwt-6.0.1/
qmake
make
make install

Instal boost

Instalasi secara manual boost 

Download dari http://sourceforge.net/projects/boost/files/boost/1.49.0/boost_1_49_0.zip/download

cp boost_1_49_0.zip /usr/local/src
cd /usr/local/src
unzip boost_1_49_0.zip
chmod -Rf 777 /usr/local/src/boost_1_49_
mkdir /opt/boost_1_49_0
BOOST_PREFIX=/opt/boost_1_49_0
cd /usr/local/src/boost_1_49_0  
./bootstrap.sh
sudo ./b2 --prefix=$BOOST_PREFIX --with-thread --with-date_time \
--with-program_options --with-filesystem --with-system \
--layout=versioned threading=multi variant=release install

Siapkan GIT

Install GIT minimal 

apt-get install git-core git

jika ingin lebih eksis dapat menginstalasi lebih lengkap 

apt-get install git-core git-doc gitk stgit git-arch git-cvs git-svn git-email gitweb

Download GNURadio & UHD

Download menggunakan perintah 

cd /usr/local/src
git clone git://gnuradio.org/gnuradio gnuradio.git 
git clone git://ettus.sourcerepo.com/ettus/uhd.git uhd.git

Compile UHD

cd /usr/local/src/uhd.git/host/
mkdir build
cd build
cmake ../
make
make test
sudo make install
sudo ldconfig

PKG_CONFIG_PATH=/usr/local/src/uhd.git/host/build/
export PKG_CONFIG_PATH

Setup UHD

Download & Install firmware 

wget http://files.ettus.com/binaries/master_images/uhd-images_003.004.001-98-gae40e8f5.tar.gz
tar zxvf uhd-images_003.004.001-98-gae40e8f5.tar.gz 
cp -Rf uhd-images_003.004.001-98-gae40e8f5/* /usr/local/

Setup UHD agar mengetahui bahwa USRP1 menggunakan clock 52MHz 

cd /usr/local/share/uhd/utils/
./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000

Hasilnya 

linux; GNU C++ version 4.6.1; Boost_104601; UHD_003.004.001-101-gff2649ca

Creating USRP device from address: type=usrp1
-- Opening a USRP1 device...
-- Using FPGA clock rate of 64.000000MHz...

Fetching current settings from EEPROM...
    EEPROM ["mcr"] is ""

Setting EEPROM ["mcr"] to "52000000"...
Power-cycle the USRP device for the changes to take effect.


Cek menggunakan 

cd /usr/local/share/uhd/utils
./uhd_usrp_probe | more

Hasilnya antara lain harus keluar 

|    /
|   |       Mboard: USRP1
|   |   serial: 0R24X5U1
|   |   mcr: 52000255
|   |   
|   |   Time sources: none
|   |   Clock sources: internal
|   |   Sensors:

Compile GNURadio

*WARNING* : source git yang baru tidak ada bootstrap Sebaiknya compile menggunakan cmake di bawah.

Sambungan USRP ke PC. Instalasi & Compile menggunakan cmake 

cd /usr/local/src/gnuradio.git
./bootstrap
./configure --enable-gr-uhd

atau 

./configure --enable-all-components \
            --disable-gr-audio-osx \
            --disable-gr-audio-windows \
            --disable-gr-comedi \
            --disable-gr-qtgui \
            --disable-gr-shd
make
make check
sudo make install
sudo ldconfig


Compile GNURadio

./configure --disable-all-components --enable-usrp --enable-gruel

Compile GNURadio menggunakan cmake

Cara ini tidak bisa di satukan dengan cara di atas akan error 

cd /usr/local/src/gnuradio.git
mkdir build
cd /usr/local/src/gnuradio.git/build

cmake -DBOOST_ROOT=$BOOST_PREFIX \
-DBoost_INCLUDE_DIR=$BOOST_PREFIX/include/boost-1_49/ \
-DBoost_LIBRARY_DIRS=$BOOST_PREFIX/lib /usr/local/src/gnuradio.git

make
make test
sudo make install
ldconfig


Error Bad Practice

Keluar error pada saat menjalankan cmake 

CMake Error at CMakeLists.txt:22 (message):
  Prevented in-tree built.  This is bad practice.
-- Configuring incomplete, errors occurred!

SOLUSI:

  • Jangan di satukan cara compile ini engan cara tradisional di atas.

Instalasi UHD USRP

Instalasi UHD USRP Support 

cd /usr/local/share/uhd/utils
sudo cp uhd-usrp.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules


Setup firmware USRP1 agar nilai clock 52MHz 

cd /usr/local/share/uhd/utils/
./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000

Error

Setelah dilakukan 

./usrp_burn_mb_eeprom --args="type=usrp1" --key=mcr --val=52000000

Keluar 

UHD Warning:
    Could not locate USRP1 firmware.
    Please install the images package.
Error: LookupError: KeyError: No devices found for ----->
Device Address:
    type: usrp1

SOLUSI:

Lakukan GNURadio: UHD Image

Perbaiki PATH

Edit 

gedit .bashrc

Masukan 

export PATH=$PATH:/usr/local/bin/
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
export PYTHONPATH=$PYTHONPATH:/usr/local/lib/python2.7/site-packages/

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

Ettus E110

GPRS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=GNURadio:_Ubuntu_11.10_Install_dari_GIT_GNURadio&oldid=34164"