Difference between revisions of "OpenBTS: E110 Cek Daughter Board"

From OnnoWiki
Jump to navigation Jump to search
 
(38 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==LED di Muka==
 +
 +
LED di muka akan berguna untuk melakukan debugging hardware dan software.
 +
 +
LED A: transmitting
 +
LED B: fpga loaded
 +
LED C: receiving
 +
LED D: fpga loaded
 +
LED E: reference lock
 +
LED F: board power
 +
 +
==Ubah Master Clock ke 52MHz==
 +
 +
Untuk keperluan [[OpenBTS]] kita perlu mengubah master clock ke 52MHz.
 +
Hal ini dapat dilakukan menggunakan perintah
 +
 +
uhd_usrp_probe --args="master_clock_rate=52e6"
 +
 +
'''Ini tidak permanen rupanya'''
 +
 +
==Cek Menggunakan uhd_find_devices==
 +
 +
ketik
 +
 +
uhd_find_devices
 +
 +
Hasilnya
 +
 +
linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; UHD_003.004.000-7dc76db
 +
 +
--------------------------------------------------
 +
-- UHD Device 0
 +
--------------------------------------------------
 +
Device Address:
 +
    type: e100
 +
    node: /dev/usrp_e0
 +
    name:
 +
    serial: EBR10Z9E2
 +
 +
 +
==Cek Menggunakan usrp-e-loopback==
 +
 +
cd /usr/local/share/uhd/usrp_e_utils
 +
./usrp-e-loopback --duration 10
 +
 +
==Cek Menggunakan usrp-e-wb-test==
 +
 +
cd /usr/local/share/uhd/usrp_e_utils
 +
./usrp-e-wb-test
 +
 
==Cek Menggunakan  uhd_usrp_probe ==
 
==Cek Menggunakan  uhd_usrp_probe ==
  
Line 4: Line 54:
  
 
  uhd_usrp_probe
 
  uhd_usrp_probe
 +
uhd_usrp_probe --args="model=E110"
  
 
Hasilnya
 
Hasilnya
Line 91: Line 142:
 
  |  |  |  |  Name: ad9522
 
  |  |  |  |  Name: ad9522
 
  |  |  |  |  Gain range pga: -20.0 to 0.0 step 0.1 dB
 
  |  |  |  |  Gain range pga: -20.0 to 0.0 step 0.1 dB
 +
 +
 +
===Compatibility Error===
 +
 +
Kalau keluar Error
 +
 +
-- Performing wishbone readback test... pass
 +
Error: RuntimeError: Expected FPGA compatibility number 9, but got 8:
 +
The FPGA build is not compatible with the host code build.
 +
 +
'''SOLUSI:'''
 +
 +
Lakukan [[OpenBTS: E110 Install UHD Image | Instalasi UHD Image]]
 +
Tepatnya, download dari
 +
 +
http://files.ettus.com/binaries/master_images/
 +
http://files.ettus.com/binaries/next_images/
 +
http://files.ettus.com/binaries/uhd_stable/
 +
 +
tar zxvf uhd-images_003.004.003-205-g4896bf78.tar.gz
 +
cd uhd-images_003.004.003-205-g4896bf78/share/uhd/images/
 +
cp -Rf * /usr/share/uhd/images/
 +
cp -Rf * /usr/local/share/uhd/images/
  
 
==Cek Menggunakan lantency_test==
 
==Cek Menggunakan lantency_test==
Line 96: Line 170:
 
Tulis perintah
 
Tulis perintah
  
−
  root@usrp-e1xx:/usr/share/uhd/examples# latency_test  
+
  cd /usr/share/uhd/examples
 +
./latency_test  
  
 
Hasilnya
 
Hasilnya
Line 130: Line 205:
 
   
 
   
 
  ACK 999, UNDERFLOW 0, TIME_ERR 1, other 0
 
  ACK 999, UNDERFLOW 0, TIME_ERR 1, other 0
 +
 +
==Cek Menggunakan USRP E Utils==
 +
 +
Menggunakan usrp-e-loopback
 +
 +
/usr/share/uhd/usrp_e_utils/usrp-e-loopback
 +
 +
setup memory mapped ring buffer... done
 +
start write thread...
 +
start read thread...
 +
..........
 +
seq_errors          0
 +
checksum_errors    0
 +
sent_words32        47972576
 +
recvd_words32      47745124
 +
approx send rate    4.79726Msps
 +
approx recv rate    4.77451Msps
 +
 +
 +
Menggunakan usrp-e-wb-test
 +
 +
/usr/share/uhd/usrp_e_utils/usrp-e-wb-test
 +
 +
num pass: 0    num fail: 0
 +
num pass: 1000000      num fail: 0
 +
num pass: 2000000      num fail: 0
 +
num pass: 3000000      num fail: 0
 +
num pass: 4000000      num fail: 0
 +
num pass: 5000000      num fail: 0
 +
num pass: 6000000      num fail: 0
 +
num pass: 7000000      num fail: 0
 +
num pass: 8000000      num fail: 0
 +
num pass: 9000000      num fail: 0
 +
num pass: 10000000
 +
num fail: 0
 +
 +
 +
==Cek usrp_siggen.py==
 +
 +
Kita dapat mencek kemampunan transmit Daughter Board menggunakan perintah
 +
 +
uhd_siggen.py -f  900000000
 +
uhd_siggen.py -f 1700000000
 +
uhd_siggen.py -f 1800000000
 +
 +
Jika di monitor menggunakan usrp_fft.py di USRP1 di sisi lain akan tampak
 +
 +
[[Image:Usrp siggen1.jpeg|center|200px|thumb]]
 +
 +
 +
==Benchmark OFDM==
 +
 +
 +
=== di USRP1 RX ===
 +
 +
cd /usr/local/src/gnuradio-3.4.2/gnuradio-examples/python/digital
 +
./benchmark_rx.py -f 18e8
 +
 +
Hasil
 +
 +
Requested RX Bitrate: 100k
 +
Actual Bitrate: 100k
 +
>>> gr_fir_fff: using SSE
 +
 +
=== di E110 TX ===
 +
 +
cd /usr/share/gnuradio/examples/digital/ofdm
 +
./benchmark_tx.py -f 18e8
 +
 +
==Referensi==
 +
 +
* http://files.ettus.com/uhd_docs/manual/html/usrp_e1xx.html
  
 
==Pranala Menarik==
 
==Pranala Menarik==
  
 
* [[OpenBTS]]
 
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
  
−
===Persiapan Hardware===
+
===Persiapan===
  
 
* [[USRP: High Precision Clock]]
 
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 +
* [[USRP: ClockTamer Flashing]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
 +
* [[USRP: Tip Pemesanan]]
 +
 +
===Script===
 +
 +
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
  
 +
* [[GNURadio]]
 
* [[GNURadio: Ubuntu Install]]
 
* [[GNURadio: Ubuntu Install]]
 +
* [[GNURadio: Menggunakan UHD]]
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
 
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
−
* [[OpenBTS: Ubuntu Install]]
+
* [[GNURadio: Programming Untuk Pemula]]
−
* [[OpenBTS: Konfigurasi]]
+
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
−
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]]
+
* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Menjalankan smqueue]]
 
* [[OpenBTS: Menjalankan smqueue]]
−
* [[OpenBTS: Mengoperasikan BTS]]
+
* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
 
* [[OpenBTS: Operasi 1800 MHz]]
 
* [[OpenBTS: Operasi 1800 MHz]]
Line 157: Line 329:
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: Amplifier]]
 
* [[OpenBTS: SMS]]
 
* [[OpenBTS: SMS]]
 +
* [[AirProbe]]
  
 
===OpenBTS 2.8===
 
===OpenBTS 2.8===
  
−
* [[GNURadio: Ubuntu 11.10 Install]] '''*NOT RECOMMENED*'''
+
* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
−
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] '''NOT RECOMMENDED'''
+
* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Download GNURadio]]
 +
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
 +
* [[GNURadio: UHD]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 +
* [[GNURadio: UHD Identifikasi Device]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
 
* [[OpenBTS: Ubuntu 11.10 Install]]
−
* [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED'''
+
* [[OpenBTS: dari GIT ttsou]]
−
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]]
+
* [[OpenBTS: 2.8 dari SVN Install]]
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 +
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Config Test]]
 +
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]]
 +
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: Set SQLite parameter smqueue]]
 +
* [[OpenBTS: FreeSWITCH]]
 +
 +
===Multi OpenBTS 2.8===
 +
 +
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
 +
* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
 +
* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
 +
* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
 +
* [[Multi OpenBTS: Catatan BCCH]]
 +
* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
  
 
===Ettus E110===
 
===Ettus E110===
  
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
−
* [[OpenBTS: E110 Install Image di MicroSD]]
+
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Cek Daughter Board]]
 +
* [[OpenBTS: E110 Mengubah Master Clock]]
 +
* [[OpenBTS: E110 Kalibrasi Clock]]
 +
* [[OpenBTS: E110 Konfigurasi Jaringan]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 Instalasi iptables]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
 +
* [[OpenBTS: E110 Compile UHD]] ''Not Recommended''
 +
* [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended''
 +
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended''
 +
* [[OpenBTS: E110 Install UHD Image]] ''Not Recommended''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Yate Softswitch]]
 +
 +
===Ettus N210===
 +
 +
* [[OpenBTS: N210 Instalasi GPSDO Kit]]
 +
* [[OpenBTS: N210 GNURadio]]
 +
* [[OpenBTS: N210 GNURadio 3.7.0]]
 +
* [[OpenBTS: N210 Instalasi OpenBTS]]
 +
* [[OpenBTS: N210 Instalasi Yate]]
 +
* [[OpenBTS: N210 Yate Config Test]]
 +
* [[OpenBTS: N210 Burn Firmware]]
 +
 +
===RangeNetworks===
 +
 +
* [[OpenBTS: RangeNetwork Foto]]
 +
* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
 +
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Instalasi UHD]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[OpenBTS: RangeNetwork Audit]]
 +
* [[VoIP: Trunk]]
 +
 +
===GPRS===
 +
 +
* [[OpenBTS: GPRS]]
 +
* [[OpenBTS: GPRS Konfigurasi]]
 +
* [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]]
 +
 +
===Briker OpenBTS===
 +
 +
* [[OpenBTS: Briker]]
 +
 +
===FreeSWITCH OpenBTS===
 +
 +
* [[OpenBTS: FreeSWITCH]]
 +
 +
===Power Amplifier===
 +
 +
* [[Driver 900MHz]]
 +
* [[Power Amplifier 900MHz]]
 +
* [[Duplexer]]
 +
* [[OpenBTS: Menaikan Jangkauan OpenBTS]]
  
 
===Lain Lain===
 
===Lain Lain===
  
 +
* [[OpenBTS: Materi Magang di ICTWATCH]]
 +
* [[OpenBTS: Seminar Outline]]
 +
* [[OpenBTS: Workshop Outline]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Membuat Base Station GSM Open Source]]
 
* [[Teknologi Selular]]
 
* [[Teknologi Selular]]
Line 194: Line 482:
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[Siapa Bilang OpenBTS Ilegal?]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 
* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
 +
* [[OpenBTS: Catatan MNC dan MCC COOL]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
 +
* [[GSM: Daftar Channel Frekuensi]]
  
 
===Catatan Sejarah===
 
===Catatan Sejarah===
Line 201: Line 491:
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 +
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 +
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
 +
 +
===Dokumentasi Video===
 +
 +
* http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
 +
* http://youtu.be/8ogOcUSpINU (1/6)
 +
* http://youtu.be/F5d7HGuhppk (2/6)
 +
* http://youtu.be/90Jgq6bOgrQ (3/6)
 +
* http://youtu.be/cNkx_qNqdfc (4/6)
 +
* http://youtu.be/6LCuoeI57ak (5/6)
 +
* http://youtu.be/-dEqcHoIlYk (6/6)
 +
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 +
 +
===Perjuangan OpenBTS===
 +
 +
* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 +
 +
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 05:59, 11 March 2014

LED di Muka

LED di muka akan berguna untuk melakukan debugging hardware dan software. 

LED A: transmitting
LED B: fpga loaded
LED C: receiving
LED D: fpga loaded
LED E: reference lock
LED F: board power

Ubah Master Clock ke 52MHz

Untuk keperluan OpenBTS kita perlu mengubah master clock ke 52MHz. Hal ini dapat dilakukan menggunakan perintah 

uhd_usrp_probe --args="master_clock_rate=52e6"

Ini tidak permanen rupanya

Cek Menggunakan uhd_find_devices

ketik 

uhd_find_devices

Hasilnya 

linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; UHD_003.004.000-7dc76db

--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
    type: e100
    node: /dev/usrp_e0
    name: 
    serial: EBR10Z9E2


Cek Menggunakan usrp-e-loopback

cd /usr/local/share/uhd/usrp_e_utils
./usrp-e-loopback --duration 10

Cek Menggunakan usrp-e-wb-test

cd /usr/local/share/uhd/usrp_e_utils
./usrp-e-wb-test

Cek Menggunakan uhd_usrp_probe

Tulis 

uhd_usrp_probe
uhd_usrp_probe --args="model=E110"

Hasilnya 

linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; UHD_003.004.000-7dc76db

-- Opening device node /dev/usrp_e0...
-- Initializing FPGA clock to 64.000000MHz...
-- USRP-E100 clock control: 10
--   r_counter: 2
--   a_counter: 0
--   b_counter: 20
--   prescaler: 8
--   vco_divider: 5
--   chan_divider: 5
--   vco_rate: 1600.000000MHz
--   chan_rate: 320.000000MHz
--   out_rate: 64.000000MHz
-- 
-- Performing wishbone readback test... pass
  _____________________________________________________
 /
|       Device: E-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: E110 (euewanee)
|   |   vendor: 3
|   |   device: 1
|   |   revision: 4
|   |   content: 0
|   |   model: E110
|   |   serial: EBR10Z9E2
|   |   
|   |   Time sources: none, external, _external_
|   |   Clock sources: internal, external, auto
|   |   Sensors: ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: RFX1800 (0x0034)
|   |   |   Serial: E1R11X8R8
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Subdev: 0
|   |   |   |   Name: RFX RX
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked, rssi
|   |   |   |   Freq range: 1500.000 to 2100.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 70.0 step 0.0 dB
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: 0.0 to 20.0 step 1.0 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: RFX1800 (0x0035)
|   |   |   Serial: E1R11X8R8
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: 0
|   |   |   |   Name: RFX TX
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 1500.000 to 2100.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: Yes
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: -20.0 to 0.0 step 0.1 dB


Compatibility Error

Kalau keluar Error 

-- Performing wishbone readback test... pass
Error: RuntimeError: Expected FPGA compatibility number 9, but got 8:
The FPGA build is not compatible with the host code build.

SOLUSI:

Lakukan Instalasi UHD Image Tepatnya, download dari 

http://files.ettus.com/binaries/master_images/
http://files.ettus.com/binaries/next_images/
http://files.ettus.com/binaries/uhd_stable/

tar zxvf uhd-images_003.004.003-205-g4896bf78.tar.gz
cd uhd-images_003.004.003-205-g4896bf78/share/uhd/images/
cp -Rf * /usr/share/uhd/images/
cp -Rf * /usr/local/share/uhd/images/

Cek Menggunakan lantency_test

Tulis perintah 

cd /usr/share/uhd/examples
./latency_test

Hasilnya 

linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500; UHD_003.004.000-7dc76db

-- Opening device node /dev/usrp_e0...
-- Initializing FPGA clock to 64.000000MHz...
-- USRP-E100 clock control: 10
--   r_counter: 2
--   a_counter: 0
--   b_counter: 20
--   prescaler: 8
--   vco_divider: 5
--   chan_divider: 5
--   vco_rate: 1600.000000MHz
--   chan_rate: 320.000000MHz
--   out_rate: 64.000000MHz
-- 
-- Performing wishbone readback test... pass

UHD Warning:
    The hardware does not support the requested TX sample rate:
    Target sample rate: 25.000000 MSps
    Actual sample rate: 21.333333 MSps
Actual TX Rate: 21.333333 Msps...

UHD Warning:
    The hardware does not support the requested RX sample rate:
    Target sample rate: 25.000000 MSps
    Actual sample rate: 21.333333 MSps
Actual RX Rate: 21.333333 Msps...

ACK 999, UNDERFLOW 0, TIME_ERR 1, other 0

Cek Menggunakan USRP E Utils

Menggunakan usrp-e-loopback 

/usr/share/uhd/usrp_e_utils/usrp-e-loopback 

setup memory mapped ring buffer... done
start write thread... 
start read thread... 
..........
seq_errors          0
checksum_errors     0
sent_words32        47972576
recvd_words32       47745124
approx send rate    4.79726Msps
approx recv rate    4.77451Msps


Menggunakan usrp-e-wb-test 

/usr/share/uhd/usrp_e_utils/usrp-e-wb-test 

num pass: 0     num fail: 0
num pass: 1000000       num fail: 0
num pass: 2000000       num fail: 0
num pass: 3000000       num fail: 0
num pass: 4000000       num fail: 0
num pass: 5000000       num fail: 0
num pass: 6000000       num fail: 0
num pass: 7000000       num fail: 0
num pass: 8000000       num fail: 0
num pass: 9000000       num fail: 0
num pass: 10000000
num fail: 0


Cek usrp_siggen.py

Kita dapat mencek kemampunan transmit Daughter Board menggunakan perintah 

uhd_siggen.py -f  900000000
uhd_siggen.py -f 1700000000
uhd_siggen.py -f 1800000000

Jika di monitor menggunakan usrp_fft.py di USRP1 di sisi lain akan tampak

Usrp siggen1.jpeg


Benchmark OFDM

di USRP1 RX

cd /usr/local/src/gnuradio-3.4.2/gnuradio-examples/python/digital
./benchmark_rx.py -f 18e8

Hasil 

Requested RX Bitrate: 100k
Actual Bitrate: 100k
>>> gr_fir_fff: using SSE

di E110 TX

cd /usr/share/gnuradio/examples/digital/ofdm
./benchmark_tx.py -f 18e8

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenBTS:_E110_Cek_Daughter_Board&oldid=39943"