Difference between revisions of "OpenBTS: Ubuntu Install"

Latest revision as of 07:21, 14 August 2012

Compile dan Install GNURadio 3.3.0. Tanpa GNURadio terinstall maka OpenBTS tidak mungkin di instalasi.
Instalasi Astersik di Ubuntu tanpa Asterisk, tidak bisa melakukan authentikasi.

Instalasi paket / library pendukung tambahan

apt-get install libortp8 libortp-dev libosip2-4 libosip2-dev

Compile osip

LANGKAH INI SEBAIKNYA DI SKIP

Kadang kala untuk bisa mengcompile SMS queue tampaknya osip dari Ubuntu tidak bisa di gunakan kita harus compile dari scratch

apt-get remove --purge libosip2-4 libosip2-dev

Download osip

http://ftp.gnu.org/gnu/osip/
http://ftp.gnu.org/gnu/osip/libosip2-3.6.0.tar.gz
http://mirrors.kernel.org/gnu/osip/libosip2-3.6.0.tar.gz
ftp://mirrors.kernel.org/gnu/osip/

Compile

cp libosip2-3.6.0.tar.gz /usr/local/src
cd /usr/local/src
tar zxvf libosip2-3.6.0.tar.gz
mkdir linux-build
cd /usr/local/src/linux-build/
../libosip2-3.6.0/configure 
make clean
make all
make
make install

Install OpenBTS

Download source code dari

http://www.openbts.org
http://sourceforge.net/projects/openbts/

Lakukan

cp openbts-2.6.0Mamou.tar.gz /usr/local/src/
cd /usr/local/src/
tar zxvf openbts-2.6.0Mamou.tar.gz
cd /usr/local/src/openbts-2.6.0Mamou/
./configure 
make clean
make all
make 
make install

Modifikasi USRP Device untuk Single Doughterboard

Referensi:

https://github.com/somat/openbts-patch
http://github.com/ttsou/openbts-dboard/tarball/master

Download source code ttsou

cp ttsou-openbts-dboard-dff7527.tar.gz /usr/local/src/
cd /usr/local/src
tar zxvf ttsou-openbts-dboard-dff7527.tar.gz 
cd /usr/local/src/ttsou-openbts-dboard-dff7527/public-trunk/
cp -Rf * /usr/local/src/openbts-2.6.0Mamou

Modifikasi file USRPDevice.cpp

cd /usr/local/src/openbts-2.6.0Mamou/Transceiver
vi USRPDevice.cpp

const dboardConfigType dboardConfig = TXA_RXA;

Compile

cd /usr/local/src/openbts-2.6.0Mamou/
./configure 
make clean
make all
make 
make install

Compile smqueue

Install g++ 4.3 karena versi 4.4 tidak bisa digunakan untuk compile smqueue

apt-get install g++-4.3

Edit Makefile.standalone

vi /usr/local/src/openbts-2.6.0Mamou/smqueue/Makefile.standalone

g++ -o smqueue $(CPPFLAGS) $(INCLUDES) smqueue.cpp smnet.cpp smcommands.cpp ../HLR/HLR.cpp $(LIBS)

menjadi

g++-4.3 -o smqueue $(CPPFLAGS) $(INCLUDES) smqueue.cpp smnet.cpp smcommands.cpp ../HLR/HLR.cpp $(LIBS)

Compile smqueue

cd /usr/local/src/openbts-2.6.0Mamou/smqueue/
make -f Makefile.standalone

Instalasi OpenBTS Selesai :)

OpenBTS 2.6 masih belum sempurna, setiap kali kita mengubah user di asterisk, kita perlu mengcompile ulang smqueue, silahkan baca-baca OpenBTS: SMS

Error g++ 4.4

Jika kita menggunakan g++ 4.4 maka akan terjadi error sebagai berikut

smnet.cpp:423: error: invalid conversion from ‘const char*’ to ‘char*’
make: *** [smqueue] Error 1

Di OpenBTS 2.6 masih belum sempurna, setiap kali kita mengubah user di asterisk, kita perlu mengcompile ulang smqueue, silahkan baca-baca OpenBTS: SMS

Edit Konfigurasi smqueue

Copy smqueue.config.example ke smqueue.config

cd /usr/local/src/openbts-2.6.0Mamou/smqueue/
cp smqueue.config.example smqueue.config

Konfigurasi smqueue berada di ./smqueue/smqueue.config. Tambahkan sedikit di smqueue.config agar:

vi /usr/local/src/openbts-2.6.0Mamou/smqueue/smqueue.config

tambahkan supaya tidak crash waktu mengirim SMS registrasi

Log.Alarms.Max 10

buat savedqueue.txt di directory ./smqueue

touch /usr/local/src/openbts-2.6.0Mamou/smqueue/savedqueue.txt

Pranala Menarik

Persiapan

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Difference between revisions of "OpenBTS: Ubuntu Install"

Latest revision as of 07:21, 14 August 2012

Contents

Compile osip

Install OpenBTS

Modifikasi USRP Device untuk Single Doughterboard

Compile smqueue

Error g++ 4.4

Edit Konfigurasi smqueue

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

Ettus E110

GPRS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Navigation menu

Search

@@ Line 1: / Line 1: @@
+* [[GNURadio: Ubuntu Install| Compile dan Install GNURadio 3.3.0]]. Tanpa [[GNURadio]] terinstall maka [[OpenBTS]] tidak mungkin di instalasi.
+* [[Instalasi Astersik di Ubuntu]] tanpa Asterisk, tidak bisa melakukan authentikasi.
-    * Sign in
+Instalasi paket / library pendukung tambahan
-    * Register
-    * Home
+ apt-get install libortp8 libortp-dev libosip2-4 libosip2-dev
-    * Projects
-    * Help
-Search:
+==Compile osip==
-GNU Radio
-    * Overview
+'''LANGKAH INI SEBAIKNYA DI SKIP'''
-    * Activity
-    * Roadmap
-    * Issues
-    * News
-    * Documents
-    * Wiki
-    * Files
-    * Repository
-Wiki
+Kadang kala untuk bisa mengcompile [[SMS]] queue tampaknya osip dari [[Ubuntu]] tidak bisa di gunakan kita harus compile dari scratch
-Start page
-Index by title
-Index by date
-History
-GNU Radio Release 3.2¶
-With the latest GNU Radio release 3.2, binary package installation is available for Ubuntu 9.04 (Jaunty), bypassing the need for manually installing build tool prerequisites and performing a source code installation. In addition, installation and configuration of the USRP and USRP2 is automated. This is fastest and easiest way to get a working GNU Radio platform.
+ apt-get remove --purge libosip2-4 libosip2-dev
-The rest of this page is now somewhat outdated and needs some reorganization.
+Download osip
-Installation Options¶
-This page provides information and scripts to compile and install GNU Radio and its required background applications, libraries, and includes on Ubuntu Linux 6.10 ("Edgy") or newer; they can probably be applied to some previous versions, though that hasn't been tested.
+ http://ftp.gnu.org/gnu/osip/
+ http://ftp.gnu.org/gnu/osip/libosip2-3.6.0.tar.gz
+ http://mirrors.kernel.org/gnu/osip/libosip2-3.6.0.tar.gz
+ ftp://mirrors.kernel.org/gnu/osip/
-Installation on Ubuntu 6.10 ("Edgy") can be completed for the most part using binary packages and a package manager, but some packages must be downloaded and compiled from source.
+Compile
-Installation on Ubuntu 7.04 ("Feisty") or newer systems can be completed entirely using binary packages and a package manager, or may be done by download and source compile.
+ cp libosip2-3.6.0.tar.gz /usr/local/src
+ cd /usr/local/src
+ tar zxvf libosip2-3.6.0.tar.gz
+ mkdir linux-build
+ cd /usr/local/src/linux-build/
+ ../libosip2-3.6.0/configure
+ make clean
+ make all
+ make
+ make install
-NOTE: The official releases of GNU Radio, version 3.0.3 or earlier, will *NOT* reliably function on Feisty when using a USRP; the USRP will work once, then fail and require the USRP to be power cycled or Ubuntu to be rebooted. Fixes for correct functionality are available in the SVN trunk.
+==Install OpenBTS==
-Pre-Requisites for Source Build¶
-The following packages are required for compiling various parts of GNU Radio on Ubuntu. These packages can be installed via "synaptic", "dselect", or "apt-get". Use the latest versions of all packages unless otherwise noted.
+Download [[source code]] dari
-    * Development Tools (need for compilation)
+ http://www.openbts.org
-          o g++
+ http://sourceforge.net/projects/openbts/
-          o subversion
-          o make
-          o autoconf, automake, libtool
-          o sdcc (from "universe"; 2.4 or newer)
-          o guile (1.6 or newer)
-          o ccache (not required, but recommended if you compile frequently)
-    * Libraries (need for runtime and for compilation)
+Lakukan
-          o python-dev
-          o FFTW 3.X (fftw3, fftw3-dev)
-          o cppunit (libcppunit and libcppunit-dev)
-          o Boost 1.35 (or later)
-          o libusb and libusb-dev
-          o wxWidgets (wx-common) and wxPython (python-wxgtk2.8)
-          o python-numpy (via python-numpy-ext) (for SVN on or after 2007-May-28)
-          o ALSA (alsa-base, libasound2 and libasound2-dev)
-          o Qt (libqt3-mt-dev for versions earlier than 8.04; version 4 works for 8.04 and later)
-          o SDL (libsdl-dev)
-          o GSL GNU Scientific Library (libgsl0-dev >= 1.10 required for SVN trunk, not in binary repositories for 7.10 and earlier)
-    * SWIG (1.3.31 or newer required)
+ cp openbts-2.6.0Mamou.tar.gz /usr/local/src/
-          o Edgy or previous: requires installation from source
+ cd /usr/local/src/
-          o Feisty or newer: use the standard package install (swig)
+ tar zxvf openbts-2.6.0Mamou.tar.gz
+ cd /usr/local/src/openbts-2.6.0Mamou/
+ ./configure
+ make clean
+ make all
+ make
+ make install
-    * QWT (optional) (5.0.0 or newer required)
+===Modifikasi USRP Device untuk Single Doughterboard===
-          o Must be installed from source (as of 2008-01-15).
-          o qt4 versions should be used for 8.04 and 8.10. DO! : sudo apt-get update and then upgrade for a proper qt4.
-    * QWT Plot3d Lib
+Referensi:
-          o Must be installed for gr-qtgui to work. qt4 version preferred for Ubuntu 8.04 and 8.10
-    * Polyphase Filter Bank examples
+ https://github.com/somat/openbts-patch
-          o for the examples in gnuradio-examples/python/pfb to work you need to install python-scipy, python-matplotlib, and python-tk
+ http://github.com/ttsou/openbts-dboard/tarball/master
-    * Other useful packages
+Download [[source code]] ttsou
-          o doxygen (for creating documentation from source code)
-          o octave (from "universe")
-Install Scripts¶
+ cp ttsou-openbts-dboard-dff7527.tar.gz /usr/local/src/
+ cd /usr/local/src
+ tar zxvf ttsou-openbts-dboard-dff7527.tar.gz
+ cd /usr/local/src/ttsou-openbts-dboard-dff7527/public-trunk/
+ cp -Rf * /usr/local/src/openbts-2.6.0Mamou
-The following are scripts to take most users through a GNU Radio install on a typical Ubuntu install, with the hope that it provides enough guidance such that you can get GNU Radio up and running on your Ubuntu box.
+Modifikasi file USRPDevice.cpp
-* This section is for Edgy or previous only (no changes are needed on Feisty or newer, except possibly to disable the CDROM entry):
-Manually uncomment all repositories to include "universe" and "multiverse" either via direct editing
-  sudo <EDITOR> /etc/apt/sources.list
+ cd /usr/local/src/openbts-2.6.0Mamou/Transceiver
+ vi USRPDevice.cpp
+ const dboardConfigType dboardConfig = TXA_RXA;
-or via the provided GUI: System -> Administration -> Software Sources. Then enter the admin password for access. On the "Ubuntu" tab, make sure all of "main restricted universe multiverse" are checked and the rest unchecked (or deal with those are you deem correct for your setup). Click "Close", then "Reload" to update the package list. The uncommented lines of the file "/etc/apt/sources.list" should read something like (DIST is a string with your particular distribution: edgy, feisty, gusty, etc):
+Compile
-deb http://us.archive.ubuntu.com/ubuntu/ DIST main restricted universe multiverse
+ cd /usr/local/src/openbts-2.6.0Mamou/
-deb http://us.archive.ubuntu.com/ubuntu/ DIST-updates main restricted universe multiverse
+ ./configure
-deb http://security.ubuntu.com/ubuntu/ DIST-security main restricted universe multiverse
+ make clean
+ make all
+ make
+ make install
-Update the local dpkg cache:
+==Compile smqueue==
-sudo apt-get update
+Install g++ 4.3 karena versi 4.4 tidak bisa digunakan untuk compile smqueue
-Install required packages (some are likely already installed by Ubuntu by default; some are likely redundant with others; but these groups cover all of the required packages, except for in Edgy)
+ apt-get install g++-4.3
-* Lucid (10.04):
-sudo apt-get -y install libfontconfig1-dev libxrender-dev libpulse-dev swig g++ automake libtool python-dev libfftw3-dev \
+Edit Makefile.standalone
-libcppunit-dev libboost-all-dev libusb-dev fort77 sdcc sdcc-libraries \
-libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
-libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
-python-cheetah python-lxml doxygen qt4-dev-tools \
-libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools
-* Karmic (9.10):
+ vi /usr/local/src/openbts-2.6.0Mamou/smqueue/Makefile.standalone
-sudo apt-get -y install swig g++ automake libtool python-dev libfftw3-dev \
+ g++ -o smqueue $(CPPFLAGS) $(INCLUDES) smqueue.cpp smnet.cpp smcommands.cpp ../HLR/HLR.cpp $(LIBS)
-libcppunit-dev libboost1.38-dev libusb-dev fort77 sdcc sdcc-libraries \
+menjadi
-libsdl1.2-dev python-wxgtk2.8 subversion git-core guile-1.8-dev \
+ g++-4.3 -o smqueue $(CPPFLAGS) $(INCLUDES) smqueue.cpp smnet.cpp smcommands.cpp ../HLR/HLR.cpp $(LIBS)
-libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
-python-cheetah python-lxml doxygen qt4-dev-tools \
-libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools
-* Jaunty (9.04): **Package sdcc-nf needs to be installed (instead of sdcc)**
+Compile smqueue
-sudo apt-get -y install swig g++ automake1.9 libtool python-dev fftw3-dev \
+ cd /usr/local/src/openbts-2.6.0Mamou/smqueue/
-libcppunit-dev libboost1.35-dev sdcc-nf libusb-dev \
+ make -f Makefile.standalone
-libsdl1.2-dev python-wxgtk2.8 subversion git guile-1.8-dev \
-libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
-python-cheetah python-lxml doxygen qt4-dev-tools \
-libqwt5-qt4-dev libqwtplot3d-qt4-dev pyqt4-dev-tools
+Instalasi OpenBTS Selesai :)
-If you are upgrading from an older install, you may have python-wxgtk2.6 installed.
+OpenBTS 2.6 masih belum sempurna, setiap kali kita mengubah user di asterisk, kita perlu mengcompile ulang smqueue, silahkan baca-baca [[OpenBTS: SMS]]
-Because python-wxgtk2.6 takes precedence over python-wxgtk2.8, it must be removed: sudo apt-get remove python-wxgtk2.6 * Intrepid (8.10): **Package sdcc-nf needs to be installed (instead of sdcc)**
-sudo apt-get -y install swig g++ automake1.9 libtool python-dev fftw3-dev \
-libcppunit-dev libboost1.35-dev sdcc-nf libusb-dev \
-libsdl1.2-dev python-wxgtk2.8 subversion git guile-1.8-dev \
-libqt4-dev python-numpy ccache python-opengl libgsl0-dev \
-python-cheetah python-lxml doxygen qt4-dev-tools \
-libqwt5-qt4-dev libqwtplot3d-qt4-dev  pyqt4-dev-tools
-* Hardy (8.04): **Boost should be installed as explained in README.building-boost file **
+===Error g++ 4.4===
-sudo apt-get -y install swig g++ automake1.9 libtool python-dev fftw3-dev \
+Jika kita menggunakan g++ 4.4 maka akan terjadi error sebagai berikut
-libcppunit-dev sdcc libusb-dev libasound2-dev libsdl1.2-dev \
-python-wxgtk2.8 subversion guile-1.8-dev libqt4-dev python-numpy-ext \
-ccache python-opengl libgsl0-dev python-cheetah python-lxml doxygen \
-libqwt5-qt4-dev libqwtplot3d-qt4-dev qt4-dev-tools pyqt4-dev-tools
-* Gutsy (7.10): **Boost should be installed as explained in README.building-boost file. GSL is required Also **
+ smnet.cpp:423: error: invalid conversion from ‘const char*’ to ‘char*’
+ make: *** [smqueue] Error 1
-sudo apt-get -y install g++ automake libtool python-dev fftw3-dev \
-libcppunit-dev sdcc libusb-dev libasound2-dev \
-libsdl1.2-dev python-wxgtk2.8 subversion guile-1.8-dev libgsl0-dev \
-libqt3-mt-dev python-numpy-ext swig ccache
-* Feisty (7.04): **Boost should be installed as explained in README.building-boost file. GSL is required Also **
+Di OpenBTS 2.6 masih belum sempurna, setiap kali kita mengubah user di asterisk, kita perlu mengcompile ulang smqueue, silahkan baca-baca [[OpenBTS: SMS]]
-sudo apt-get -y install g++ automake1.9 libtool python-dev fftw3-dev \
-libcppunit-dev sdcc libusb-dev libasound2-dev \
-libsdl1.2-dev python-wxgtk2.8 subversion guile-1.6-dev\
-libqt3-mt-dev python-numpy-ext swig ccache
-* Edgy (6.10): **It is strongly recommended that you use one of the newer releases above**
+==Edit Konfigurasi smqueue==
-sudo apt-get -y install g++ automake1.9 libtool python-dev fftw3-dev \
-libcppunit-dev libboost-dev sdcc libusb-dev libasound2-dev \
-libsdl1.2-dev python-wxgtk2.6 subversion guile-1.6-dev \
-libqt3-mt-dev python-numpy-ext ccache
+Copy smqueue.config.example ke smqueue.config
-Note that above line for Edgy installs python-wxgtk-2.6. While this is good enough for older gnuradio releases, it is too old for recent gnuradio svn snapshots. If you want to build a recent svn snapshot of gnuradio you need wxgtk version 2.8 or later.
+ cd /usr/local/src/openbts-2.6.0Mamou/smqueue/
-You can install more recent wxgtk versions from the wxwidgets debian and ubuntu repository.
+ cp smqueue.config.example smqueue.config
-See Installing latest wxgtk-2.8 packages on debian or Ubuntu Install optional packages, if desired; some might already be installed from the previous command:
-sudo apt-get -y install gkrellm wx-common libwxgtk2.8-dev alsa-base autoconf xorg-dev g77 gawk bison openssh-server emacs cvs usbview octave
+Konfigurasi smqueue berada di ./smqueue/smqueue.config. Tambahkan sedikit di smqueue.config agar:
-For Edgy only: Get, Compile, and Install SWIG
+ vi /usr/local/src/openbts-2.6.0Mamou/smqueue/smqueue.config
-wget http://prdownloads.sourceforge.net/swig/swig-1.3.33.tar.gz
+tambahkan supaya tidak crash waktu mengirim [[SMS]] registrasi
-tar zxf swig-1.3.33.tar.gz
-cd swig-1.3.33
-./configure
-make
-sudo make install
-cd ..
-Optional: Get, Compile, Install QWT 5.0.0 (or newer): * NOTE: You should not need to set the environment variables "QTDIR" or "QWT_CFLAGS", so leave them be (for now).
+ Log.Alarms.Max 10
-wget http://superb-east.dl.sourceforge.net/sourceforge/qwt/qwt-5.0.2.tar.bz2
+buat savedqueue.txt di directory ./smqueue
-tar jxf qwt-5.0.2.tar.bz2
-cd qwt-5.0.2
-* Now edit qwtconfig.pri: ** Change the unix version of "INSTALLBASE" to "/usr/local" (was "/usr/local/qwt-5.0.2"); ** Change "doc.path" to "$$INSTALLBASE/doc/qwt" (was "$$INSTALLBASE/doc"); ** Save, exit.
+ touch /usr/local/src/openbts-2.6.0Mamou/smqueue/savedqueue.txt
-The "doc" portion is in both HTML and man-style, but is all in /usr/local/doc/{html,man}. While this isn't the standard path, there doesn't seem to be an easy way to separate them and thus this is left as is. Then:
-qmake
+==Pranala Menarik==
-make
-sudo make install
-cd ..
-Install Boost¶
+* [[OpenBTS]]
+* [[OpenBTS: Arsitektur secara umum]]
-For Ubuntu 8.04 and older, download and install Boost 1.35 or later as follows (see README.building-boost file):
+===Persiapan===
-) Download the latest version of boost from boost.sourceforge.net (boost_1_37_0.tar.bz2 was the latest when this was written).
+* [[USRP: High Precision Clock]]
-) unpack it somewhere and cd into the resulting directory
+* [[USRP: Menyambungkan ClockTamer ke USRP1]]
+* [[USRP: Kalibrasi ClockTamer]]
+* [[USRP: ClockTamer Control Protocol]]
+* [[USRP: Instalasi Board]]
+* [[OpenBTS: GIT Source Code]]
+* [[USRP: Rangkaian Board USRP]]
+* [[OpenBTS: Tethr untuk Bencana Alam]]
-$ cd boost_1_37_0
+===OpenBTS 2.6===
-) Pick a prefix to install it into. For example use /opt/boost_1_37_0
+* [[GNURadio]]
+* [[GNURadio: Ubuntu Install]]
+* [[GNURadio: Menggunakan UHD]]
+* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
+* [[GNURadio: Contoh Aplikasi]]
+* [[GNURadio: Spectrum Analizer GSM]]
+* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
+* [[GNURadio: Programming Untuk Pemula]]
+* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
+* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
+* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
+* [[OpenBTS: Kalibrasi]]
+* [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
+* [[OpenBTS: Menjalankan smqueue]]
+* [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
+* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
+* [[OpenBTS: Operasi 1800 MHz]]
+* [[OpenBTS: Beberapa Tips]]
+* [[OpenBTS: USRP2]]
+* [[OpenBTS: Amplifier]]
+* [[OpenBTS: SMS]]
+* [[AirProbe]]
-$ BOOST_PREFIX=/opt/boost_1_37_0
+===OpenBTS 2.8===
-) Configure
+* [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
+* [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
+* [[GNURadio: Download GNURadio]]
+* [[GNURadio: Install UHD]]
+* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
+* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
+* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
+* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
+* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
+* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
+* [[GNURadio: UHD]] ''NOT RECOMMENDED''
+* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
+* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
+* [[GNURadio: UHD Identifikasi Device]]
+* [[OpenBTS: Ubuntu 11.10 Install]]
+* [[OpenBTS: dari GIT ttsou]]
+* [[OpenBTS: 2.8 dari SVN Install]]
+* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
+* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
+* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
+* [[OpenBTS: Yate Config Test]]
+* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 Konfigurasi]]
+* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
+* [[OpenBTS: Database SQLite]]
-$ ./configure --prefix=$BOOST_PREFIX --with-libraries=thread,date_time,program_options
+===Multi OpenBTS 2.8===
-) Compile the package
+* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
+* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
-$ make
+===Ettus E110===
-) Install the package
+* [[OpenBTS: E110 Cara Login]]
+* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
+* [[OpenBTS: E110 Cek Daughter Board]]
+* [[OpenBTS: E110 Mengubah Master Clock]]
+* [[OpenBTS: E110 Kalibrasi Clock]]
+* [[OpenBTS: E110 Bekerja dengan opkg]]
+* [[OpenBTS: E110 GNURadio]]
+* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
+* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
+* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
+* [[OpenBTS: E110 Instalasi OpenBTS]]
+* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
+* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
-$ sudo make install
+===GPRS===
-$ cd ..
+* [[OpenBTS: GPRS]]
-Installing GNU Radio¶
+===Power Amplifier===
-Download, bootstrap, configure, and compile GNU Radio package:
-# Install GNU Radio from git
+* [[Driver 900MHz]]
+* [[Power Amplifier 900MHz]]
+* [[Duplexer]]
-git clone http://gnuradio.org/git/gnuradio.git
+===Lain Lain===
-cd gnuradio
+* [[OpenBTS: Materi Magang di ICTWATCH]]
-export LD_LIBRARY_PATH=$BOOST_PREFIX/lib     # As per the instructions for installing Boost
+* [[OpenBTS: Seminar Outline]]
+* [[OpenBTS: Workshop Outline]]
+* [[Membuat Base Station GSM Open Source]]
+* [[Teknologi Selular]]
+* [[GSM: Daftar Channel Frekuensi]]
+* [[Wireless Internet]]
+* [[OpenBSC]]
+* [[AirProbe]]
+* [[Base station subsystem]]
+* [[GSM]]
+* [[Asterisk]]
+* [[Mobile phone]]
-./bootstrap
+===Catatan Legal dan Pendukung===
-./configure --with-boost=$BOOST_PREFIX   # As per the instructions for installing Boost
-make
-Optionally: Run the GNU Radio software self-check; does not require a USRP.
+* [[Siapa Bilang OpenBTS Ilegal?]]
+* [[OpenBTS: Catatan MNC dan MCC Indonesia]]
+* [[OpenBTS: Catatan MNC dan MCC COOL]]
+* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
+* [[GSM: Daftar Channel Frekuensi]]
-make check
+===Catatan Sejarah===
+* [[2011/04/30 - Workshop OpenBTS Pertama di Indonesia dilakukan di Univ Gajah Putih Takengon Aceh Tengah]]
+* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
+* [[OpenBTS: Daftar Artikel di Media]]
-If any test or tests do not work, GNU Radio might still function properly, but it might be wise to look in the email archives for a fix or to write the email list. If writing to the email list, please include the OS type, OS version, and CPU type (e.g. via "uname -a"), anything special about the computer hardware, software versions (gcc, g++, swig, sdcc, etc) and how installed (standard or non-standard package, source). Now install GNU Radio for general use (default is in to /usr/local ):
+===Dokumentasi Video===
-sudo make install
+* http://youtu.be/8ogOcUSpINU (1/6)
+* http://youtu.be/F5d7HGuhppk (2/6)
+* http://youtu.be/90Jgq6bOgrQ (3/6)
+* http://youtu.be/cNkx_qNqdfc (4/6)
+* http://youtu.be/6LCuoeI57ak (5/6)
+* http://youtu.be/-dEqcHoIlYk (6/6)
-Ubuntu uses udev for handling hotplug devices, and does not by default provide non-root access to the USRP. The following script is taken from directions, and sets up groups to handle USRP via USB, either live or hot-plug
+[[Category: Wireless]]
+[[Category: Selular]]
-sudo addgroup usrp
-sudo usermod -G usrp -a <YOUR_USERNAME>
-echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", GROUP:="usrp", MODE:="0660"' > tmpfile
-sudo chown root.root tmpfile
-sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules
-* At this point, Ubuntu is configured to know what to do if/when it detects the USRP on the USB, except that "udev" needs to reload the rules to include the newly created one. The following might work, but if it doesn't then rebooting the computer will.
-sudo udevadm control --reload-rules
-or
-sudo /etc/init.d/udev stop
-sudo /etc/init.d/udev start
-or
-sudo killall -HUP udevd
-You can check if the USRP is being recognized, by examining /dev/bus/usb after plugging in a USRP. Using the command:
-ls -lR /dev/bus/usb | grep usrp
-should result in one or more lines (one for each USRP) reading something like:
-crw-rw---- 1 root usrp 189, 514 Mar 24 09:46 003
-Each device file will be listed with group 'usrp' and mode 'crw-rw----'.
-    * NOTE: If installing on Feisty or newer, the computer probably needs to be rebooted in order for the GNU Radio software to interface correctly with the USRP hardware. This does not seem to be necessary on Edgy.
-Once you've verified that the USRP is available to Ubuntu, now it is time to verify that GNU Radio works with the USRP (if installed; if not, skip this). While "usrp_benchmark_usb" might not return a full 32 MB/s of throughput, the script should at least run properly; if not, either GNU Radio didn't make correctly or the USRP isn't accessible. From the "gnuradio" directory, verify that all of the following work:
-* Python interface to the USRP; provides a rough estimate of the maximum throughput (quantized to a power of 2) between the host computer and the USRP.
-cd gnuradio-examples/python/usrp
-./usrp_benchmark_usb.py
-* C++ interface to the USRP; provides a good estimate of the maximum throughput (non-quantized) between the host computer and the USRP.
-cd usrp/host/apps
-./test_usrp_standard_tx
-./test_usrp_standard_rx
-Update the rest of the system, after which you might need or want to reboot:
-sudo apt-get -y upgrade
-Update the Linux distro, after which a reboot is required:
-sudo apt-get -y dist-upgrade
-Broken libtool on Debian and Ubuntu¶
-Because Debian and Ubuntu apply a poorly implemented "enhancement" to the upstream version of libtool,
-they break the ability to test code and libraries prior to installing them. We think that testing before
-installation is a good idea. To work around their damage, be sure to include
-$PREFIX/lib (and $PREFIX/lib64 on 64-bit machines) in /etc/ld.so.conf.
-If you don't include $PREFIX/lib in /etc/ld.so.conf, you will see errors during the linking phase
-of the build. There are several places it shows up. The first one is often during the build of
-mblocks. It's not an mblock problem. It's a Debian/Ubuntu problem.
-Do this to work around this "feature":
-) Make a copy from the current ld.so.conf file and save it in a temp folder:
-cp /etc/ld.so.conf /tmp/ld.so.conf
-) Add /usr/local/lib path to it :
-echo /usr/local/lib >> /tmp/ld.so.conf
-) If you installed Boost (version 1_37_0 for example) manually, then add its library path to the file:
-echo /opt/boost_1_37_0/lib >> /tmp/ld.so.conf
-) Delete the original ld.so.conf file and put the modified file instead:
-sudo mv /tmp/ld.so.conf /etc/ld.so.conf
-) Do ldconfig:
-sudo ldconfig