Difference between revisions of "Mikrotik: Static Routing Sedehana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:SR1.png|center|400px|thumb]] | [[File:SR1.png|center|400px|thumb]] | ||
| + | |||
| + | |||
| + | ==Topologi== | ||
| + | |||
| + | R1 | ||
| + | e0 --> NAT | ||
| + | e1 --> R2 e0 | ||
| + | e2 --> LAN 192.168.1.1/24 | ||
| + | |||
| + | R2 | ||
| + | e0 --> R1 e1 | ||
| + | e1 --> LAN 192.168.2.1/24 | ||
| + | |||
| + | ==Konfigurasi== | ||
Router1: | Router1: | ||
| − | /ip address | + | /ip address |
| − | add address= | + | add address=192.168.122.100/24 interface=ether1 |
| + | add address=192.168.122.101/24 interface=ether1 | ||
| + | add address=192.168.122.102/24 interface=ether1 | ||
add address=172.16.1.1/30 interface=ether2 | add address=172.16.1.1/30 interface=ether2 | ||
add address=192.168.1.1/24 interface=ether3 | add address=192.168.1.1/24 interface=ether3 | ||
/ip route | /ip route | ||
| − | add gateway= | + | add gateway=192.168.122.1 |
add dst-address=192.168.2.0/24 gateway=172.16.1.2 | add dst-address=192.168.2.0/24 gateway=172.16.1.2 | ||
| Line 31: | Line 47: | ||
ping 192.168.1.1 | ping 192.168.1.1 | ||
| + | |||
| + | ==Tambahan Kalau Membutuhkan NAT== | ||
| + | |||
| + | Router1: | ||
| + | |||
| + | /ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade | ||
| + | /ip firewall nat print | ||
| Line 36: | Line 59: | ||
==Setting Client== | ==Setting Client== | ||
| + | LAN 1 Client: | ||
| + | ip 192.168.1.2 | ||
| + | gw 192.168.1.1 | ||
| + | |||
| + | |||
| + | LAN 2 Client: | ||
| + | |||
| + | ip 192.168.2.2 | ||
| + | gw 192.168.2.1 | ||
| + | |||
| + | ==Referensi== | ||
| + | |||
| + | * https://wiki.mikrotik.com/wiki/Manual:Simple_Static_Routing | ||
| Line 42: | Line 78: | ||
==Pranala Menarik== | ==Pranala Menarik== | ||
| − | * | + | * [[TCP/IP: Advanced Routing]] |
| + | * [[Quagga]] | ||
| + | * [[VyOS]] | ||
| + | * [[Mikrotik]] | ||
| + | * [[Cisco]] | ||
| + | * [[Juniper]] | ||
| + | * [[BIRD: Routing]] | ||
| + | * [[IPv6]] | ||
| + | |||
| + | |||
| + | * [[TCP/IP: Advanced Routing]] | ||
| + | * [[IPv6: Advanced Routing]] | ||
| + | * [[IPv6: Quagga]] | ||
| + | * [[IPv6: Mikrotik]] | ||
| + | * [[IPv6: Cisco]] | ||
| + | * [[IPv6: Juniper]] | ||
| + | * [[IPv6: BIRD: Routing]] | ||
| + | * [[IPv6]] | ||
Latest revision as of 20:06, 16 April 2021
Topologi
R1 e0 --> NAT e1 --> R2 e0 e2 --> LAN 192.168.1.1/24
R2 e0 --> R1 e1 e1 --> LAN 192.168.2.1/24
Konfigurasi
Router1:
/ip address add address=192.168.122.100/24 interface=ether1 add address=192.168.122.101/24 interface=ether1 add address=192.168.122.102/24 interface=ether1 add address=172.16.1.1/30 interface=ether2 add address=192.168.1.1/24 interface=ether3
/ip route add gateway=192.168.122.1 add dst-address=192.168.2.0/24 gateway=172.16.1.2
Router2:
/ip address add address=172.16.1.2/30 interface=ether1 add address=192.168.2.1/24 interface=ether2
/ip route add gateway=172.16.1.1
Test
Router1:
ping 192.168.2.1
Router2:
ping 192.168.1.1
Tambahan Kalau Membutuhkan NAT
Router1:
/ip firewall nat add chain=srcnat out-interface=ether1 action=masquerade /ip firewall nat print
Setting Client
LAN 1 Client:
ip 192.168.1.2 gw 192.168.1.1
LAN 2 Client:
ip 192.168.2.2 gw 192.168.2.1
Referensi
Pranala Menarik