Difference between revisions of "VyOS: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (→OSPF) |
Onnowpurbo (talk | contribs) |
||
| Line 9: | Line 9: | ||
R1 | R1 | ||
| − | + | eth1: -- R3: eth1 | |
| − | + | eth2: -- R2: eth1 | |
| − | + | eth3: -- Internet | |
R2: | R2: | ||
| − | + | eth1: -- R1: eth2 | |
| − | + | eth2: -- R3: eth2 | |
| − | + | eth3: -- LAN 172.16.1.1/16 | |
R3: | R3: | ||
| − | + | eth1: -- R1: eth1 | |
| − | + | eth2: -- R2: eth2 | |
| − | + | eth3: -- LAN 192.168.1.1/24 | |
Revision as of 09:55, 16 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
R1:
configure set interfaces ethernet eth1 address '10.10.1.1/30' set interfaces ethernet eth2 address '10.10.1.5/30' set interfaces ethernet eth3 address '192.168.122.100/24' set interfaces ethernet eth3 address '192.168.122.101/24' set interfaces ethernet eth3 address '192.168.122.102/24'
show commit exit
Router2:
configure set interfaces ethernet eth1 address '10.10.1.6/30' set interfaces ethernet eth2 address '10.10.1.9/30' set interfaces ethernet eth3 address '172.16.1.1/16'
show commit exit
Router3:
configure set interfaces ethernet eth1 address '10.10.1.2/30' set interfaces ethernet eth2 address '10.10.1.10/30' set interfaces ethernet eth3 address '192.168.1.1/24'
show commit exit
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.1
R2:
set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 172.16.0.0/16 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.6
R3:
set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 192.168.1.0/24 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.2
Verify
Cek
R1:
/routing ospf interface print /routing ospf neighbor print /ip route print
Lakukan yang sama untuk R2, R3
Referensi
Pranala Menarik