VyOS: OSPF Sederhana

From OnnoWiki
Jump to navigation Jump to search



Image6005.gif

Sambungan

R1
eth1: -- R3: eth1
eth2: -- R2: eth1
eth3: -- Internet
R2:
eth1: -- R1: eth2
eth2: -- R3: eth2
eth3: -- LAN 172.16.1.1/16
R3:
eth1: -- R1: eth1
eth2: -- R2: eth2
eth3: -- LAN 192.168.1.1/24


Setiap kali menjalankan VM VyOS di GNS3, lakukan

sudo chown root:useranda /dev/kvm

sebelum me-RUN setiap VM VyOS satu per satu.

IP address

R1:

configure
set interfaces ethernet eth1 address '10.10.1.1/30'
set interfaces ethernet eth2 address '10.10.1.5/30'
set interfaces ethernet eth3 address '192.168.122.100/24'
set interfaces ethernet eth3 address '192.168.122.101/24'
set interfaces ethernet eth3 address '192.168.122.102/24'
show
commit
exit


Router2:

configure
set interfaces ethernet eth1 address '10.10.1.6/30'
set interfaces ethernet eth2 address '10.10.1.9/30'
set interfaces ethernet eth3 address '172.16.1.1/16'
show
commit
exit


Router3:

configure
set interfaces ethernet eth1 address '10.10.1.2/30'
set interfaces ethernet eth2 address '10.10.1.10/30'
set interfaces ethernet eth3 address '192.168.1.1/24'
show
commit
exit

OSPF

Ada tiga (3) elemen dasar konfigurasi OSPF:

  • Enable OSPF instance
  • OSPF area configuration
  • OSPF network configuration

instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.


R1:

configure
set protocols ospf area 0 network 10.10.1.0/30
set protocols ospf area 0 network 10.10.1.4/30
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.1
show
show protocols
commit
exit


R2:

configure
set protocols ospf area 0 network 10.10.1.4/30
set protocols ospf area 0 network 10.10.1.8/30
set protocols ospf area 0 network 172.16.0.0/16
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.6
show
show protocols
commit
exit


R3:

configure
set protocols ospf area 0 network 10.10.1.0/30
set protocols ospf area 0 network 10.10.1.8/30
set protocols ospf area 0 network 192.168.1.0/24
set protocols ospf log-adjacency-changes
set protocols ospf parameters router-id 10.10.1.2
show
show protocols
commit
exit

Verify

Cek R1, R2, R3

show ip ospf database 
show ip ospf neighbor
show ip ospf route 
show ip route

Referensi


Pranala Menarik