Difference between revisions of "Cisco: Static Routing Sedehana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 71: | Line 71: | ||
==Tambahan Kalau Membutuhkan NAT== | ==Tambahan Kalau Membutuhkan NAT== | ||
| − | + | Menggunakan NAT untuk Memungkinkan Pengguna Internal Mengakses Internet | |
| − | + | Jalankan langkah ini untuk memungkinkan pengguna internal anda mengakses Internet dan menyimpan alamat di kumpulan alamat global di dalam menggunakan kelebihan alamat global. | |
| − | |||
| − | |||
| − | |||
SUMMARY STEPS | SUMMARY STEPS | ||
| Line 94: | Line 91: | ||
end | end | ||
| + | R1: | ||
enable | enable | ||
| Line 101: | Line 99: | ||
ip nat inside source list 1 pool net-168.1 overload | ip nat inside source list 1 pool net-168.1 overload | ||
interface ethernet1/3 | interface ethernet1/3 | ||
| − | ip address 192.168.1. | + | ! ip address 192.168.1.1 255.255.255.0 |
ip nat inside | ip nat inside | ||
exit | exit | ||
interface ethernet1/1 | interface ethernet1/1 | ||
| − | ip address 10.10.0.1 255.255.255.0 | + | ! ip address 10.10.0.1 255.255.255.0 |
| + | ! ip address dhcp client | ||
ip nat outside | ip nat outside | ||
end | end | ||
Revision as of 08:44, 23 December 2018
R1:
Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN
R2:
Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN
R1:
enable
configure terminal
interface ethernet1/1
! ip address 10.1.1.2 255.255.255.0
ip address dhcp
no shutdown
exit
interface ethernet1/2
ip address 172.16.1.1 255.255.255.252
no shutdown
exit
interface ethernet1/3
ip address 192.168.1.1 255.255.255.0
exit
ip route 192.168.2.0 255.255.255.0 172.16.1.2
exit
copy running-config startup-config
R2:
enable
config terminal
interface ethernet1/1
ip address 172.16.1.2 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 192.168.2.1 255.255.255.0
exit
ip route 192.168.1.0 255.255.255.0 172.16.1.1
ip route 0.0.0.0 0.0.0.0 172.16.1.1
exit
copy running-config startup-config
Request DHCP
enable
config terminal
interface ethernet1/1
ip dhcp client request
exit
exit
Test
R1:
ping 192.168.2.1
R2:
ping 192.168.1.1
Tambahan Kalau Membutuhkan NAT
Menggunakan NAT untuk Memungkinkan Pengguna Internal Mengakses Internet
Jalankan langkah ini untuk memungkinkan pengguna internal anda mengakses Internet dan menyimpan alamat di kumpulan alamat global di dalam menggunakan kelebihan alamat global.
SUMMARY STEPS
enable
configure terminal
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
access-list access-list-number permit source [source-wildcard ]
ip nat inside source list access-list-number pool name overload
interface type number
ip address ip-address mask
ip nat inside
exit
interface type number
ip address ip-address mask
ip nat outside
end
R1:
enable configure terminal ip nat pool net-168.1 192.168.1.1 192.168.1.254 netmask 255.255.255.0 access-list 1 permit 192.168.1.0 0.0.0.255 ip nat inside source list 1 pool net-168.1 overload interface ethernet1/3 ! ip address 192.168.1.1 255.255.255.0 ip nat inside exit interface ethernet1/1 ! ip address 10.10.0.1 255.255.255.0 ! ip address dhcp client ip nat outside end
Referensi
Setting Client
LAN 1 Client:
ip 192.168.1.2 gw 192.168.1.1
LAN 2 Client:
ip 192.168.2.2 gw 192.168.2.1