Difference between revisions of "OpenWRT: Build Firmware Linksys E1700"

From OnnoWiki
Jump to navigation Jump to search
 
(33 intermediate revisions by the same user not shown)
Line 20: Line 20:
  
 
  cd /usr/local/src
 
  cd /usr/local/src
−
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.43.tar.gz
+
  wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
−
  tar zxvf XML-Parser-2.43.tar.gz
+
  tar zxvf XML-Parser-2.44.tar.gz
−
  cd /usr/local/src/XML-Parser-2.43
+
  cd /usr/local/src/XML-Parser-2.44
 
  perl Makefile.PL
 
  perl Makefile.PL
 
  make install
 
  make install
−
 
  
 
==Compile Menggunakan Development Trunk==
 
==Compile Menggunakan Development Trunk==
Line 50: Line 49:
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
 
  ./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
 
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
 
  ./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
 +
./scripts/feeds install quagga coova-chilli
 
  ./scripts/feeds update -a
 
  ./scripts/feeds update -a
 
  ./scripts/feeds install -a
 
  ./scripts/feeds install -a
Line 55: Line 55:
 
  make defconfig
 
  make defconfig
 
  make menuconfig
 
  make menuconfig
−
  make world
+
  make clean && make -j8 world &
 +
 
  
 
Hasilnya akan berada di folder
 
Hasilnya akan berada di folder
Line 69: Line 70:
 
  Target Profile (Linksys E1700) --->
 
  Target Profile (Linksys E1700) --->
  
−
Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita perlu menambahkannya secara manual berikut ini.
+
Konfigurasi default yang ada dari openwrt tidak ada driver wifi.
 +
Kita dapat menambahkan paling tidak
  
 +
* Luci
 +
* Asterisk (supaya keren)
 +
* Samba (supaya keren)
 +
* UPnP (supaya keren)
 +
* Freifunk '''_JANGAN_''' di install karena membuat masalah di Linksys E1700.
  
 +
Administration  --->
 +
      <*> asterisk11-gui
 +
      <*> asterisk18-gui
 +
Kernel modules  --->
 +
      Network Support  --->
 +
            -*- kmod-ipv6
 +
            -*- kmod-ppp
 +
            -*-  kmod-pppoe
 +
            -*-  kmod-pppox
 +
            -*- kmod-sched
 +
            -*- kmod-sched-core
 +
      Wireless Drivers  --->
 +
            -*- kmod-cfg80211
 +
            -*- kmod-mac80211
 +
            <*> kmod-rt2800-pci
 +
            <*> kmod-rt2800-soc
 +
            -*- kmod-rt2x00-lib
 +
LuCI  --->
 +
      1. Collections
 +
              -*- luci
 +
              <*> luci-ssl
 +
      2. Modules  --->
 +
              -*- luci-base
 +
              -*- luci-mod-admin-full
 +
              <*> luci-mod-failsafe
 +
              <*> luci-mod-rpc
 +
      3. Applications
 +
              <*> luci-app-ahcp
 +
              <*> luci-app-asterisk
 +
              -*- luci-app-firewall
 +
              <*> luci-app-multiwan
 +
              <*> luci-app-pbx
 +
              <*> luci-app-radvd
 +
              <*> luci-app-samba
 +
              <*> luci-app-upnp
 +
              <*> luci-app-wshaper
 +
      4. Themes
 +
              -*- luci-theme-bootstrap
 +
              <*> luci-theme-openwrt
 +
      5. Protocols
 +
              <*> luci-proto-ipv6
 +
              -*- luci-proto-ppp
 +
Network  --->
 +
      Telephony  --->
 +
              -*- asterisk11
 +
              -*- asterisk18
 +
              <*> sipp
 +
              <*> sipsak
 +
      -*- ahcpd
 +
      -*- hostapd-common
 +
      -*- iw
 +
      -*- samba36-server
 +
      <*> wpad-mini
 +
      -*- wshaper
  
 +
Setelah selesai, kita perlu compile
  
−
-------Select the following configuration------
+
cd ~/openwrt.trunk/trunk
−
 
+
  make clean
−
 
+
make defconfig
−
 
+
make world
−
rt2860v2-for-openwrt-mt7620
 
−
 
 
−
rt2860v2_ap/rt2860v2_sta driver for openwrt trunk(3.10.x kernel) on MT7620 SOC. (Test on mt7620n 16m flash + 64M ram)
 
−
 
 
−
 
 
−
 
 
−
Target System: (Ralink 288x/3xxx)
 
−
  Subtarget: (MT7620N based boards)
 
−
 
 
−
$make V=99
 
−
 
 
−
Wait make command to be done.
 
−
 
 
−
When make finished. The firmware will be in the directory: $HOME/openwrt/openwrt-trunk/bin/ramips/
 
  
 +
Setelah jadi, kita perlu menambahkan driver wifi dan compile ulang secara manual berikut ini.
  
 
==Cara Menambahkan Driver Wifi==
 
==Cara Menambahkan Driver Wifi==
Line 99: Line 148:
  
 
  cd ~
 
  cd ~
 +
rm -Rf ~/rt2860v2-for-openwrt-mt7620/
 
  git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git
 
  git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git
  
Line 104: Line 154:
  
 
  cd ~
 
  cd ~
−
  cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/
+
  cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/
  
 
  cd ~
 
  cd ~
−
  cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/
+
  cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/
 +
 
 +
Hati-hati folder
 +
 
 +
/linux-ramips_mt7620/linux-3.14.26
 +
/linux-ramips_mt7620/linux-3.14.27
 +
/linux-ramips_mt7620/linux-3.14.32
 +
/linux-ramips_mt7620/linux-3.18.7
 +
 
 +
mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.
 +
 
  
 
===Tambahkan di Kconfig dan Makefile===
 
===Tambahkan di Kconfig dan Makefile===
Line 113: Line 173:
 
Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"
 
Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"
  
−
Tambahkan kalimat berikut di akhir file Kconfig:
+
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD
  
−
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/Kconfig
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Kconfig  
  
 
  source "drivers/mtd/ralink/Kconfig"
 
  source "drivers/mtd/ralink/Kconfig"
 +
endif # MTD
 +
  
 
Tambahkan kalimat berikut di akhir file makefile:
 
Tambahkan kalimat berikut di akhir file makefile:
  
−
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/mtd/Makefile
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Makefile
  
 
  obj-$(CONFIG_MTD_RALINK)    += ralink/
 
  obj-$(CONFIG_MTD_RALINK)    += ralink/
  
−
Tambahkan kalimat berikut di akhir file Kconfig:
+
Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN
  
−
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/Kconfig
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Kconfig  
  
 
  source "drivers/net/wireless/rt2860v2_ap/Kconfig"
 
  source "drivers/net/wireless/rt2860v2_ap/Kconfig"
 +
endif # WLAN                     
  
 
Tambahkan kalimat berikut di akhir file makefile:
 
Tambahkan kalimat berikut di akhir file makefile:
  
−
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/linux-3.10.28/drivers/net/wireless/Makefile
+
  vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Makefile  
  
 
  obj-$(CONFIG_RT2860V2_AP)  += rt2860v2_ap/
 
  obj-$(CONFIG_RT2860V2_AP)  += rt2860v2_ap/
Line 146: Line 209:
 
Masukan konfigurasi berikut
 
Masukan konfigurasi berikut
  
−
  Device Driver -->
+
Machine selection  ---> 
−
                    <\*> Memory Technology Device (MTD) support   
+
      System type (Ralink based machines)  --->
−
                        ---> Ralink Flash Type support   
+
      Ralink SoC selection (MT7620/8)  --->
−
                            --->  [\*] Ralink MTD support   
+
      Devicetree selection (None)  --->
 +
 +
  Device Driver -->
 +
      <*> Memory Technology Device (MTD) support  --->
 +
              Ralink Flash Type support  --->
 +
                    [*] Ralink MTD support 
 +
 +
Device Driver -->
 +
      [*] Network device support  --->
 +
              [*]  Wireless LAN --->
 +
                      <*>  Ralink RT2860 802.11n AP support
 +
                      [*]    LED Support
 +
                      [ ]    WSC (WiFi Simple Config)
 +
                      [*]    LLTD (Link Layer Topology Discovery Protocol)
 +
                      [*]    WDS
 +
                      [*]     MBSSID
 +
                      [*]      New MBSSID MODE
 +
                      [*]    AP-CLient Support
 +
                      [*]      MAC Repeater Support
 +
                      [ ]    IGMP snooping (NEW)
 +
                      [ ]    NETIF Block (NEW)
 +
                      [ ]    DFS (NEW)
 +
                      [*]    Carrier Detect
 +
                      [ ]    DLS ((Direct-Link Setup) Support (NEW)
 +
                      [ ]    IDS (Intrusion Detection System) Support (NEW)
 +
                      [*]    CoC Support (NEW)
 +
                      [ ]    Memory Optimization (NEW)
 +
                      [ ]    Video Turbine support (NEW)
 +
                      [ ]    802.11n Draft3 (NEW)
 +
                      [ ]    Adjust Power Consumption Support (NEW
 +
                      [ ]    Single SKU (NEW)
 +
                      Choose Power Design (Internal PA and Internal LNA) --->
 +
                      [ ]  TSSI Compensation (NEW)
 +
                      [ ]  Temperature Compensation (NEW)
  
−
Device Driver
+
Pastikan pilih (*) untuk membuat driver masuk ke kernel, bukan kernel module.
−
    -->  [\*] Network device support
 
−
        --->  [\*]  Wireless LAN
 
−
            ---><\*>  Ralink RT2860 802.11n AP support
 
−
                    [\*]    LED Support
 
−
                    [ ]    WSC (WiFi Simple Config)
 
−
                    [\*]    LLTD (Link Layer Topology Discovery Protocol)
 
−
                    [\*]    WDS
 
−
                    [\*]    MBSSID
 
−
                    [\*]      New MBSSID MODE
 
−
                    [\*]    AP-CLient Support
 
−
                    [\*]      MAC Repeater Support
 
−
                    [ ]    IGMP snooping
 
−
                    [ ]    NETIF Block
 
−
                    [ ]    DFS
 
−
                    [\*]    Carrier Detect
 
−
                    [ ]    DLS ((Direct-Link Setup) Support
 
−
                    [ ]    IDS (Intrusion Detection System) Support
 
−
                    [\*]    CoC Support
 
−
                    [ ]    Memory Optimization
 
−
                    [ ]    Video Turbine support
 
−
                    [ ]    802.11n Draft3
 
−
                    [ ]    Adjust Power Consumption Support
 
−
                    [ ]    Single SKU
 
−
                        Choose Power Design (Internal PA and Internal LNA)  --->
 
−
                    [ ]  TSSI Compensation
 
−
                    [ ]  Temperature Compensation
 
  
−
We select "*" to building the driver into the kernel, not a kernel module.
+
===Buat lagi firmware===
  
−
==Buat lagi firmware==
+
Ulangi lagi pembuatan firmware. Tapi
 +
 
 +
'''JANGAN LAKUKAN make clean'''
  
 
  cd ~/openwrt.trunk/trunk/
 
  cd ~/openwrt.trunk/trunk/
−
  make V=99
+
  make world
 +
 
 +
Hasilnya ada di folder
 +
 
 +
~/openwrt.trunk/trunk/bin/ramips
  
−
And wait for some minutes to be builded.
+
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
−
6. After builded, burn the new firmware with wifi driver.
+
openwrt-ramips-mt7620-e1700-squashfs-sysupgrade.bin
 +
openwrt-ramips-mt7620-root.squashfs
 +
openwrt-ramips-mt7620-uImage.bin
 +
openwrt-ramips-mt7620-vmlinux.bin
 +
openwrt-ramips-mt7620-vmlinux.elf
  
−
You will found out that, wifi device ra0 will be appeared.
+
==Flash Linksys E1700==
  
−
test with:
+
Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,
 +
 
 +
* Masuk ke web
 +
* Masuk ke menu system
 +
* Masuk ke menu firmware upgrade
 +
* Pilih file .bin berikut
 +
 
 +
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
 +
 
 +
* Flash, jangan sampai listrik mati & sambungan LAN putus.
 +
 
 +
 
 +
Device ra0 akan muncul
  
 
  ifconfig ra0
 
  ifconfig ra0
 +
atau
 +
ifconfig wlan0
 +
 +
Kita tidak bisa mengkonfigurasi
 +
 +
ifconfig ra0 up.
 +
atau
 +
ifconfig wlan0 up
 +
 +
Karena kita tidak memiliki file
 +
 +
/etc/Wireless/RT2860/RT2860.dat
 +
 +
Atau symbol link ke /tmp/RT2860.dat.
 +
 +
File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file
 +
 +
RT2860.dat
 +
 +
Masukan di
 +
 +
/etc/Wireless/RT2860/RT2860.dat
 +
/tmp/RT2860.dat
 +
 +
Agar operasional Linksys E1700 menjadi stabil.
 +
 +
==Cara Membuat / Mengambil file RT2860.dat==
 +
 +
Cara paling gampang.
 +
Download yang sudah jadi
  
−
But your cann't successfully ifconfig ra0 up.
+
wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat
  
−
Because we lack the /etc/Wireless/RT2860/RT2860.dat file(or symbol link to /tmp/RT2860.dat),
+
Cara yang lebih susah.
 +
Ambil file rt2860v2.sh dari
  
−
Which generated by an scripts file in /lib/wifi directory which first introduced by lintel.
+
https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh
  
−
7. Enjoy DIY with your hands.
+
Untuk MAC address WLAN bisa di set menggunakan file
  
−
I will not provide the dat file or script file. you need to scratch up those file by yourself.
+
/etc/config/wireless
  
−
Last commit, I havn't shared the script file.
+
dengan parameter
  
−
This Time, I shared the script file named: rt2860v2.sh.
+
macaddr '1a:1a:1a:1a:1a:1a'
  
−
I fixed the wrong default mac address problem via shell command in this script file, you know, it's not the best, but works well.
+
atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah
  
−
Your can define your perefered mac addres in /etc/config/wireless file with option macaddr '1a:1a:1a:1a:1a:1a';
+
hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'
  
−
Or you can read out the factory default mac address in eeprom, using this shell:
+
Masukan hasil-nya ke parameter di  RT2860.dat
  
−
hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'
+
MacAddress=
  
−
substitute and eval this shell in the appropriate place in rt2860v2.sh file. you can get everything automatically.
+
Setelah kita mempunyai file  
−
Where is the best and perfect firmware?
 
−
I will not to Share out any more.
 
−
Dive into the code and fix it by yourself, it's so easy.
 
−
8. Say thanks to me as much as you can.
 
  
−
sorry for these Chinglish, wish you can read it.
+
RT2860.dat
  
 +
Masukan di
  
 +
mkdir -p /etc/wireless/RT2860
 +
mkdir -p /etc/Wireless/RT2860
 +
cp RT2860.dat /etc/Wireless/RT2860/RT2860.dat
 +
cp RT2860.dat /etc/wireless/RT2860/RT2860.dat
 +
cp RT2860.dat /tmp/RT2860.dat
  
−
Then, you can download and burn the new firmware to the mt7620 SOC Board via TFTP in the uboot stage.
+
Agar operasional Linksys E1700 menjadi stabil.
  
 
==Lebih Lanjut==
 
==Lebih Lanjut==
  
 
* file [[rt2860v2.sh]]
 
* file [[rt2860v2.sh]]
 +
* [[Linksys E1700: Isi file RT2860.dat]]
  
 
==Referensi==
 
==Referensi==

Latest revision as of 08:41, 18 July 2015

Spesifikasi

Model : E1700
Platform : Mediatek MT7620A
RAM [MB] : 32
Flash [MB] : 8
Ant. Conn. Type : External
WLAN NIC : SOC
WLAN standard [802.11] : b/g/n 2x2:2
Eth. port count : 4 Gb LAN 1 Gb WAN
Power Input [V/A] 12V 0.5A

Siapkan Aplikasi Pendukung

sudo su
apt-get update
apt-get install subversion gawk flex sharutils bison libz-dev zlib1g-dev patch \
fakeroot lzma git-core build-essential unzip libncurses5-dev curl php-xml-parser \
libexpat1 libexpat1-dev libssl-dev libdaemon*

cd /usr/local/src
wget http://www.cpan.org/modules/by-module/XML/XML-Parser-2.44.tar.gz
tar zxvf XML-Parser-2.44.tar.gz
cd /usr/local/src/XML-Parser-2.44
perl Makefile.PL
make install

Compile Menggunakan Development Trunk

Development Trunk tampaknya paling RECOMMENDED

Lakukan sebagai user biasa 

svn co svn://svn.openwrt.org/openwrt/trunk/ ~/openwrt.trunk/trunk
cd ~/openwrt.trunk/trunk/
./scripts/feeds update
./scripts/feeds install meshwizard openssh-server openssh-client
./scripts/feeds install freifunk-common freifunk-gwcheck freifunk-mapupdate
./scripts/feeds install luci luci-app-meshwizard luci-app-olsr luci-app-olsr-services
./scripts/feeds install luci-app-olsr-viz luci-app-freifunk-policyrouting luci-mod-freifunk
./scripts/feeds install luci-theme-freifunk-generic olsrd olsrd-mod-txtinfo olsrd-mod-dyn-gw
./scripts/feeds install olsrd-mod-dyn-gw-plain olsrd-mod-dot-draw
./scripts/feeds install olsrd-mod-arprefresh olsrd-mod-watchdog olsrd-mod-tas olsrd-mod-httpinfo
./scripts/feeds install olsrd-mod-pgraph olsrd-mod-secure olsrd-mod-bmf
./scripts/feeds install luci-app-upnp minidlna miniupnpc miniupnpd luci-app-minidlna
./scripts/feeds install libdlna libgupnp libgupnp-dlna rtorrent
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
./scripts/feeds install 6in4 6rd 4th 6to4 6tunnel libdaemon aprx usb-modeswitch
./scripts/feeds install pptpd ppp-mod-pptp smstools3 picocom
./scripts/feeds install kamailio4 kamailio asterisk18 asterisk11
./scripts/feeds install quagga coova-chilli
./scripts/feeds update -a
./scripts/feeds install -a
make clean
make defconfig
make menuconfig
make clean && make -j8 world &


Hasilnya akan berada di folder 

~/openwrt.trunk/trunk/bin/ramips/

Konfigurasi Default

Konfigurasi untuk E1700 

Target System (Ralink RT288x/RT3xxx) --->
Subtarget (MT7620 based boards) --->
Target Profile (Linksys E1700) --->

Konfigurasi default yang ada dari openwrt tidak ada driver wifi. Kita dapat menambahkan paling tidak

  • Luci
  • Asterisk (supaya keren)
  • Samba (supaya keren)
  • UPnP (supaya keren)
  • Freifunk _JANGAN_ di install karena membuat masalah di Linksys E1700.
Administration  ---> 
      <*> asterisk11-gui
      <*> asterisk18-gui
Kernel modules  --->
      Network Support  --->
            -*- kmod-ipv6
            -*- kmod-ppp
            -*-   kmod-pppoe
            -*-   kmod-pppox
            -*- kmod-sched
            -*- kmod-sched-core
      Wireless Drivers  --->
            -*- kmod-cfg80211
            -*- kmod-mac80211
            <*> kmod-rt2800-pci
            <*> kmod-rt2800-soc
            -*- kmod-rt2x00-lib
LuCI  --->
      1. Collections
             -*- luci
             <*> luci-ssl
      2. Modules  --->
             -*- luci-base
             -*- luci-mod-admin-full
             <*> luci-mod-failsafe
             <*> luci-mod-rpc
      3. Applications
             <*> luci-app-ahcp
             <*> luci-app-asterisk
             -*- luci-app-firewall
             <*> luci-app-multiwan
             <*> luci-app-pbx
             <*> luci-app-radvd
             <*> luci-app-samba
             <*> luci-app-upnp
             <*> luci-app-wshaper
      4. Themes
             -*- luci-theme-bootstrap
             <*> luci-theme-openwrt
      5. Protocols
             <*> luci-proto-ipv6
             -*- luci-proto-ppp
Network  --->
      Telephony  --->
             -*- asterisk11
             -*- asterisk18
             <*> sipp
             <*> sipsak
      -*- ahcpd
      -*- hostapd-common
      -*- iw
      -*- samba36-server
      <*> wpad-mini
      -*- wshaper

Setelah selesai, kita perlu compile 

cd ~/openwrt.trunk/trunk
make clean
make defconfig
make world

Setelah jadi, kita perlu menambahkan driver wifi dan compile ulang secara manual berikut ini.

Cara Menambahkan Driver Wifi

Download patch 

cd ~
rm -Rf ~/rt2860v2-for-openwrt-mt7620/
git clone https://github.com/wuqiong/rt2860v2-for-openwrt-mt7620.git

Merge ke build directory 

cd ~
cp -r rt2860v2-for-openwrt-mt7620/ralink ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/

cd ~
cp -r rt2860v2-for-openwrt-mt7620/rt2860v2  rt2860v2-for-openwrt-mt7620/rt2860v2_ap  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/

Hati-hati folder 

/linux-ramips_mt7620/linux-3.14.26
/linux-ramips_mt7620/linux-3.14.27 
/linux-ramips_mt7620/linux-3.14.32
/linux-ramips_mt7620/linux-3.18.7

mungkin akan berubah / berbeda tergantung versi kernel yang kita compile.


Tambahkan di Kconfig dan Makefile

Selanjutnya, tambahkan Kconfig dan Makefile obj di directory "mtd" dan "wireless"

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif #MTD 

vi  ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Kconfig 

source "drivers/mtd/ralink/Kconfig"
endif # MTD


Tambahkan kalimat berikut di akhir file makefile: 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/mtd/Makefile

obj-$(CONFIG_MTD_RALINK)    += ralink/

Tambahkan kalimat berikut di akhir file Kconfig sebelum endif # WLAN 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Kconfig 

source "drivers/net/wireless/rt2860v2_ap/Kconfig"
endif # WLAN

Tambahkan kalimat berikut di akhir file makefile: 

vi ~/openwrt.trunk/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620/linux-3.18.7/drivers/net/wireless/Makefile 

obj-$(CONFIG_RT2860V2_AP)   += rt2860v2_ap/

Tambahkan konfigurasi

Jalankan 

cd ~/openwrt.trunk/trunk
make kernel_menuconfig

Masukan konfigurasi berikut 

Machine selection  --->  
     System type (Ralink based machines)  --->
     Ralink SoC selection (MT7620/8)  --->
     Devicetree selection (None)  --->

Device Driver -->
      <*> Memory Technology Device (MTD) support  --->
             Ralink Flash Type support  --->
                   [*] Ralink MTD support  

Device Driver -->
      [*] Network device support  --->
             [*]   Wireless LAN  ---> 
                     <*>   Ralink RT2860 802.11n AP support
                     [*]     LED Support
                     [ ]     WSC (WiFi Simple Config)
                     [*]     LLTD (Link Layer Topology Discovery Protocol)
                     [*]     WDS
                     [*]     MBSSID
                     [*]       New MBSSID MODE
                     [*]     AP-CLient Support
                     [*]       MAC Repeater Support
                     [ ]     IGMP snooping (NEW)
                     [ ]     NETIF Block (NEW)
                     [ ]     DFS (NEW)
                     [*]     Carrier Detect
                     [ ]     DLS ((Direct-Link Setup) Support (NEW)
                     [ ]     IDS (Intrusion Detection System) Support (NEW)
                     [*]     CoC Support (NEW)
                     [ ]     Memory Optimization (NEW)
                     [ ]     Video Turbine support (NEW)
                     [ ]     802.11n Draft3 (NEW)
                     [ ]     Adjust Power Consumption Support (NEW
                     [ ]     Single SKU (NEW)
                     Choose Power Design (Internal PA and Internal LNA)  --->
                     [ ]   TSSI Compensation (NEW)
                     [ ]   Temperature Compensation (NEW)

Pastikan pilih (*) untuk membuat driver masuk ke kernel, bukan kernel module.

Buat lagi firmware

Ulangi lagi pembuatan firmware. Tapi

JANGAN LAKUKAN make clean 

cd ~/openwrt.trunk/trunk/
make world

Hasilnya ada di folder 

~/openwrt.trunk/trunk/bin/ramips

openwrt-ramips-mt7620-e1700-squashfs-factory.bin
openwrt-ramips-mt7620-e1700-squashfs-sysupgrade.bin
openwrt-ramips-mt7620-root.squashfs
openwrt-ramips-mt7620-uImage.bin
openwrt-ramips-mt7620-vmlinux.bin
openwrt-ramips-mt7620-vmlinux.elf

Flash Linksys E1700

Flash image yang di hasilkan ke router. Cara flash yang sederhana menggunakan Web,

  • Masuk ke web
  • Masuk ke menu system
  • Masuk ke menu firmware upgrade
  • Pilih file .bin berikut
openwrt-ramips-mt7620-e1700-squashfs-factory.bin
  • Flash, jangan sampai listrik mati & sambungan LAN putus.


Device ra0 akan muncul 

ifconfig ra0

atau 

ifconfig wlan0

Kita tidak bisa mengkonfigurasi 

ifconfig ra0 up.

atau 

ifconfig wlan0 up

Karena kita tidak memiliki file 

/etc/Wireless/RT2860/RT2860.dat

Atau symbol link ke /tmp/RT2860.dat.

File tersebut di buat oleh script di directory /lib/wifi/ yang pertama kali di perkenalkan oleh lintel. Setelah kita mempunyai file 

RT2860.dat

Masukan di 

/etc/Wireless/RT2860/RT2860.dat
/tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Cara Membuat / Mengambil file RT2860.dat

Cara paling gampang. Download yang sudah jadi 

wget https://gitorious.org/wive-rtnl-ralink-rt305x-routers-firmware/wive-rtnl-ralink-rt305x-routers-firmware/raw/a5879610328768271faad102fc0ab80de56ff813:etc/Wireless/RT2860/RT2860.dat

Cara yang lebih susah. Ambil file rt2860v2.sh dari 

https://raw.githubusercontent.com/wuqiong/rt2860v2-for-openwrt-mt7620/master/rt2860v2.sh

Untuk MAC address WLAN bisa di set menggunakan file 

/etc/config/wireless

dengan parameter 

macaddr '1a:1a:1a:1a:1a:1a'

atau menggunakan factory default mac dari eeprom yang dapat diambil menggunakan perintah 

hexdump -s 4 -n 6 -C /dev/mtd2 | head -n 1 | sed 's/\ \ /:/g' | cut -d: -f 2 | sed 's/\ /:/g'

Masukan hasil-nya ke parameter di RT2860.dat 

MacAddress=

Setelah kita mempunyai file 

RT2860.dat

Masukan di 

mkdir -p /etc/wireless/RT2860
mkdir -p /etc/Wireless/RT2860
cp RT2860.dat /etc/Wireless/RT2860/RT2860.dat
cp RT2860.dat /etc/wireless/RT2860/RT2860.dat
cp RT2860.dat /tmp/RT2860.dat

Agar operasional Linksys E1700 menjadi stabil.

Lebih Lanjut

Referensi

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Build_Firmware_Linksys_E1700&oldid=43885"