Difference between revisions of "OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS"

From OnnoWiki
Jump to navigation Jump to search
 
(10 intermediate revisions by the same user not shown)
Line 29: Line 29:
 
  opkg update
 
  opkg update
 
  opkg install libosip2-dev subversion sqlite3
 
  opkg install libosip2-dev subversion sqlite3
−
 
−
Jika dibutuhkan kita dapat menset di shell
 
−
 
−
setenv PERL5LIB /usr/share/autoconf/Autom4te:/usr/share/automake-1.11/Automake
 
  
 
Cek sqlite3
 
Cek sqlite3
Line 56: Line 52:
 
==Compile OpenBTS==
 
==Compile OpenBTS==
  
−
Compile menggunakan perintah
+
Cara yang lebih mudah untuk download menggunakan wget
  
 
  cd ~/src
 
  cd ~/src
Line 67: Line 63:
  
 
lanjutkan proses compile
 
lanjutkan proses compile
 +
 +
mkdir -p /etc/OpenBTS
 +
touch /etc/OpenBTS/SubscriberRegistry.db
 +
touch /etc/OpenBTS/ChannelTable.db
 +
touch /etc/OpenBTS/Stats.db
 +
touch /etc/OpenBTS/TMSITable.db
 +
touch /etc/OpenBTS/Transaction.db
 +
touch /etc/OpenBTS/command
  
 
  cd ~/src/openbts-2.8.0/a53/trunk/
 
  cd ~/src/openbts-2.8.0/a53/trunk/
Line 82: Line 86:
 
  cd ~/src/openbts-2.8.0/openbts/trunk/apps
 
  cd ~/src/openbts-2.8.0/openbts/trunk/apps
 
  ln -s ../Transceiver52M/transceiver .
 
  ln -s ../Transceiver52M/transceiver .
 +
 +
mkdir /var/run/OpenBTS/
 +
touch /var/run/OpenBTS/TransactionTable.db
 +
  
 
===Jika Menggunakan RFX 1800 daughter board===
 
===Jika Menggunakan RFX 1800 daughter board===
Line 113: Line 121:
 
  sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db
 
  sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db
 
  sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
 
  sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
 +
 +
==Instalasi Sipauthserve==
 +
 +
Sipauthserve adalah daemon yang memberikan [[SIP]] authentication services. Variabel SIP.Proxy.Registration di [[OpenBTS]] harus menunjuk pada hostname & port Sipauthserve. [[OpenBTS]] harus sudah di buat sebelum membuat Sipauthserve.
 +
 +
Compile Sipauthserve
 +
 +
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
 +
make
 +
 +
Setup [[database]] untuk Sipauthserve
 +
 +
mkdir /etc/OpenBTS
 +
rm -Rf /etc/OpenBTS/sipauthserve.db
 +
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
 +
sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"
 +
 +
==Instalasi Smqueue==
 +
 +
Smqueue dapat di instalasi dengan melakukan langkah berikut
 +
 +
cd ~/src/openbts-2.8.0/smqueue/trunk
 +
autoreconf -i
 +
./configure
 +
make clean
 +
make
 +
make install
 +
 +
Selanjutnya, inisialisasi konfigurasi [[database]] [[OpenBTS]]
 +
 +
cd ~/src/openbts-2.8.0/smqueue/trunk
 +
rm -Rf /etc/OpenBTS/smqueue.db
 +
sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"
  
 
==Menjalankan OpenBTS==
 
==Menjalankan OpenBTS==
  
−
  cd ~/src/openbts-2.8.0/openbts/trunk/apps/
+
'''[[OpenBTS: Yate Softswitch | Pastikan Yate sudah di Instalasi.]]'''
 +
 
 +
Lakukan di tiga (3) windows yang berbeda
 +
 
 +
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/
 +
./sipauthserve &
 +
 
 +
mkdir -p /var/lib/OpenBTS
 +
touch /var/lib/OpenBTS/smq.cdr
 +
cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/
 +
./smqueue &
 +
 
 +
cd ~/src/yate
 +
rm -Rf /var/log/yate
 +
./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d
 +
 
 +
mkdir /var/run/OpenBTS/
 +
touch /var/run/OpenBTS/TransactionTable.db
 +
  cd ~/src/openbts-2.8.0/openbts/trunk/apps
 
  ./OpenBTS &
 
  ./OpenBTS &
  
Line 218: Line 277:
 
* [[USRP: Kalibrasi ClockTamer]]
 
* [[USRP: Kalibrasi ClockTamer]]
 
* [[USRP: ClockTamer Control Protocol]]
 
* [[USRP: ClockTamer Control Protocol]]
 +
* [[USRP: ClockTamer Flashing]]
 
* [[USRP: Instalasi Board]]
 
* [[USRP: Instalasi Board]]
 
* [[OpenBTS: GIT Source Code]]
 
* [[OpenBTS: GIT Source Code]]
Line 223: Line 283:
 
* [[OpenBTS: Tethr untuk Bencana Alam]]
 
* [[OpenBTS: Tethr untuk Bencana Alam]]
 
* [[USRP: Tip Pemesanan]]
 
* [[USRP: Tip Pemesanan]]
 +
 +
===Script===
 +
 +
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 +
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
Line 231: Line 298:
 
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED''
 
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Contoh Aplikasi]]
 
* [[GNURadio: Spectrum Analizer GSM]]
 
* [[GNURadio: Spectrum Analizer GSM]]
Line 237: Line 305:
 
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED''
 
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 
* [[OpenBTS: Kalibrasi]]
 
* [[OpenBTS: Kalibrasi]]
Line 257: Line 326:
 
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Install UHD]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]]
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 +
* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED''
 +
* [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
 
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
Line 272: Line 346:
 
* [[OpenBTS: 2.8 dari SVN Install]]
 
* [[OpenBTS: 2.8 dari SVN Install]]
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 
* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED'''
 +
* [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: Yate Config Test]]
 
* [[OpenBTS: Yate Config Test]]
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Konfigurasi]]
 
* [[OpenBTS: 2.8 Konfigurasi]]
 +
* [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]]
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: Set SQLite parameter smqueue]]
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Multi OpenBTS 2.8===
 
===Multi OpenBTS 2.8===
Line 286: Line 369:
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
 +
* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
 +
* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
 +
* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
 +
* [[Multi OpenBTS: Catatan BCCH]]
 +
* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
  
 
===Ettus E110===
 
===Ettus E110===
Line 294: Line 390:
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 +
* [[OpenBTS: E110 Konfigurasi Jaringan]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 +
* [[OpenBTS: E110 Instalasi iptables]]
 
* [[OpenBTS: E110 GNURadio]]
 
* [[OpenBTS: E110 GNURadio]]
−
* [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 Compile UHD]] ''Not Recommended''
−
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended''
−
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
+
* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended''
 +
* [[OpenBTS: E110 Install UHD Image]] ''Not Recommended''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: E110 Yate Softswitch]]
 +
 +
===Ettus N210===
 +
 +
* [[OpenBTS: N210 Instalasi GPSDO Kit]]
 +
* [[OpenBTS: N210 GNURadio]]
 +
* [[OpenBTS: N210 GNURadio 3.7.0]]
 +
* [[OpenBTS: N210 Instalasi OpenBTS]]
 +
* [[OpenBTS: N210 Instalasi Yate]]
 +
* [[OpenBTS: N210 Yate Config Test]]
 +
* [[OpenBTS: N210 Burn Firmware]]
 +
 +
===RangeNetworks===
 +
 +
* [[OpenBTS: RangeNetwork Foto]]
 +
* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
 +
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Instalasi UHD]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[OpenBTS: RangeNetwork Audit]]
 +
* [[VoIP: Trunk]]
  
 
===GPRS===
 
===GPRS===
  
 
* [[OpenBTS: GPRS]]
 
* [[OpenBTS: GPRS]]
 +
* [[OpenBTS: GPRS Konfigurasi]]
 +
* [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]]
 +
 +
===Briker OpenBTS===
 +
 +
* [[OpenBTS: Briker]]
 +
 +
===FreeSWITCH OpenBTS===
 +
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Power Amplifier===
 
===Power Amplifier===
Line 312: Line 448:
 
* [[Power Amplifier 900MHz]]
 
* [[Power Amplifier 900MHz]]
 
* [[Duplexer]]
 
* [[Duplexer]]
 +
* [[OpenBTS: Menaikan Jangkauan OpenBTS]]
  
 
===Lain Lain===
 
===Lain Lain===
Line 342: Line 479:
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 
* [[OpenBTS: Daftar Artikel di Media]]
 +
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 +
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
  
 
===Dokumentasi Video===
 
===Dokumentasi Video===
  
 +
* http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
 
* http://youtu.be/8ogOcUSpINU (1/6)
 
* http://youtu.be/8ogOcUSpINU (1/6)
 
* http://youtu.be/F5d7HGuhppk (2/6)
 
* http://youtu.be/F5d7HGuhppk (2/6)
Line 351: Line 492:
 
* http://youtu.be/6LCuoeI57ak (5/6)
 
* http://youtu.be/6LCuoeI57ak (5/6)
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 +
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 +
 +
===Perjuangan OpenBTS===
 +
 +
* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 +
 +
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]

Latest revision as of 06:03, 11 March 2014

Persiapan

Set IP Adddress Statik

Edit 

vi /etc/network/interfaces

Isi dengan 

# Wired or wireless interfaces
auto eth0
# iface eth0 inet dhcp
iface eth1 inet dhcp

iface eth0 inet static  
	address 192.168.0.22
	netmask 255.255.255.0
	network 192.168.0.0
	gateway 192.168.0.222

Instalasi Aplikasi Pendukung

Instal aplikasi pendukung 

opkg update
opkg install libosip2-dev subversion sqlite3

Cek sqlite3 

sqlite3 --version

Harusnya keluar seperti 

3.6.23.1

Alternatif Download OpenBTS di PC / Laptop

Download di PC source code openbts bisa melalui 

cd /usr/local/src
apt-get install subversion
svn co http://wush.net/svn/range/software/public openbts-2.8.0

Kemudian di transfer ke E110 

scp -r openbts-2.8.0 root@<ip-address-E110>:

Compile OpenBTS

Cara yang lebih mudah untuk download menggunakan wget 

cd ~/src
svn co http://wush.net/svn/range/software/public openbts-2.8.0
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp

pastikan sleep > 5, misalnya 

sleep(8);

lanjutkan proses compile 

mkdir -p /etc/OpenBTS
touch /etc/OpenBTS/SubscriberRegistry.db
touch /etc/OpenBTS/ChannelTable.db
touch /etc/OpenBTS/Stats.db
touch /etc/OpenBTS/TMSITable.db
touch /etc/OpenBTS/Transaction.db
touch /etc/OpenBTS/command

cd ~/src/openbts-2.8.0/a53/trunk/
make
make install
cd ~/src/openbts-2.8.0/openbts/trunk
autoreconf -i
./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" 
make clean
rm -Rf ~/src/openbts-2.8.0/openbts/trunk/apps/transceiver
rm -Rf ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M/transceiver
cd ~/src/openbts-2.8.0/openbts/trunk
make 
make install
cd ~/src/openbts-2.8.0/openbts/trunk/apps
ln -s ../Transceiver52M/transceiver .

mkdir /var/run/OpenBTS/
touch /var/run/OpenBTS/TransactionTable.db


Jika Menggunakan RFX 1800 daughter board

RFX board yang biasanya di beli adalah RFX 1800. Sebaiknya di flash EEPROM agar bekerja di 900MHz / menjadi RFX 900, jika terpaksa juga menggunakan RFX 1800, kita perlu mengedit database konfigurasi OpenBTS agar beroperasi di band 1800MHz channel 860 

vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.example.sql

Agar 

INSERT INTO "CONFIG" VALUES('GSM.Radio.Band','1800',1,0,'The GSM operating band.  Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900).  For most Range models, this value is dictated by the hardware and should not be changed.  Static.');
INSERT INTO "CONFIG" VALUES('GSM.Radio.C0','860',1,0,'The C0 ARFCN.  Also the base ARFCN for a multi-ARFCN configuration.  Static.');

Instalasi Database Konfigurasi OpenBTS 

cd ~/src/openbts-2.8.0/openbts/trunk
sudo mkdir /etc/OpenBTS
rm -Rf /etc/OpenBTS/OpenBTS.db
sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit"

Instalasi Subscriber Registry

Lakukan 

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
sudo mkdir /var/lib/asterisk/
sudo mkdir -p /var/lib/asterisk/sqlite3dir
sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db
sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"

Instalasi Sipauthserve

Sipauthserve adalah daemon yang memberikan SIP authentication services. Variabel SIP.Proxy.Registration di OpenBTS harus menunjuk pada hostname & port Sipauthserve. OpenBTS harus sudah di buat sebelum membuat Sipauthserve.

Compile Sipauthserve 

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
make

Setup database untuk Sipauthserve 

mkdir /etc/OpenBTS
rm -Rf /etc/OpenBTS/sipauthserve.db
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"

Instalasi Smqueue

Smqueue dapat di instalasi dengan melakukan langkah berikut 

cd ~/src/openbts-2.8.0/smqueue/trunk
autoreconf -i
./configure 
make clean
make 
make install

Selanjutnya, inisialisasi konfigurasi database OpenBTS 

cd ~/src/openbts-2.8.0/smqueue/trunk
rm -Rf /etc/OpenBTS/smqueue.db
sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"

Menjalankan OpenBTS

Pastikan Yate sudah di Instalasi.

Lakukan di tiga (3) windows yang berbeda 

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/
./sipauthserve &

mkdir -p /var/lib/OpenBTS
touch /var/lib/OpenBTS/smq.cdr
cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/
./smqueue &

cd ~/src/yate
rm -Rf /var/log/yate
./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d

mkdir /var/run/OpenBTS/
touch /var/run/OpenBTS/TransactionTable.db
cd ~/src/openbts-2.8.0/openbts/trunk/apps
./OpenBTS &

Edit Konfigurasi

cd ~/src/openbts-2.8.0/openbts/trunk/apps/
./OpenBTSCLI

Parameter yang perlu di ubah 

config Control.LUR.OpenRegistration \W+
config GSM.Radio.Band 900
config GSM.Radio.C0 20
config GSM.Identity.MCC 001
config GSM.Identity.MNC 01
config GSM.Identity.BSIC.NCC 0
config GSM.Identity.ShortName OpenBTS
config GSM.CellSelection.NCCsPermitted 1
config GSM.CellSelection.BSIC.BCC 101
config GSM.Identity.LAC 1001
config GSM.Identity.CID 101
config SIP.Local.IP 192.168.0.22
config SIP.Proxy.Registration 192.168.0.3:5064
config SIP.Proxy.SMS 192.168.0.3:5063
config SIP.Proxy.Speech 192.168.0.3:5060

config save

Debug Transceiver

cd ~/src/openbts-2.8.0/openbts/trunk/apps/
./transceiver DEBUG

Error

Error SubscriberRegistry

EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file
Mar 29 07:26:33 usrp-e1xx openbts: EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open  SubscriberRegistry database: unable to open database file
1333002393.869356 1079640064:

SOLUSI:

Instalasi Subscriber Registry, Lakukan 

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
sudo mkdir /var/lib/asterisk/
sudo mkdir -p /var/lib/asterisk/sqlite3dir
sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"

Error TX Dead

ALERT 1089582176 TRXManager.cpp:92:clockHandler: TRX clock interface timed out, assuming TRX is dead.

SOLUSI:

  • Naikan sleep() di OpenBTS.cpp & compile ulang
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp 

sleep(8);

killall transceiver
cd ~/src/openbts-2.8.0/openbts/trunk/apps
./OpenBTS &

Error set_rates

Saat 

cd ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M
./USRPping

Error 

ALERT 1075093504 UHDDevice.cpp:357:set_rates: Actual sample rate differs from desired rate

SOLUSI:

Compile UHD agar master clock 52MHz

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenBTS:_E110_Instalasi_OpenBTS_2.8_untuk_MultiBTS&oldid=39955"